On Fri, Mar 8, 2019 at 11:32 PM Peter Robinson pbrobinson@gmail.com wrote:
Hey Tom and Jagan,
Hey all,
So it's release day and I've put up v2019.04-rc3, I've updated git and the tarballs are also up now.
Thanks again to having signed tags, between -rc2 and -rc3 we have a good changelog under 'git log --merges v2019.04-rc2..v2019.04-rc3'
We're looking at release on April 8th, 2019.
I've had reports of crashes on AllWinner A20 devices, at least Cubieboard2, CubieTruck and BananaPi, with rc2/rc3 (I'm not 100% sure when it started) in Fedora. I'm suspecting some of the DM migration here.
Are either of you aware of any issues there?
Crash below.
Regards, Peter
U-Boot SPL 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1
U-Boot 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c12000: 1 Loading Environment from FAT... ** No valid partitions found ** Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) SCSI: Target spinup took 0 ms. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: sunxi_set_gate: (CLK#66) unhandled eth0: ethernet@1c50000 Warning: usb_ether using MAC address from ROM , eth1: usb_ether starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device ** Invalid partition 1 **
are you sure, your sd has partitions?
Can you switch mmc dev and check the contents, mean while I can try it on A20 later tomorrow.