On Friday 01 June 2012 20:48:15 Marek Vasut wrote:
Dear Pali Rohár,
On Monday 30 April 2012 16:37:55 Tom Rini wrote:
On Sun, Apr 29, 2012 at 11:18:48AM +0200, Marek Vasut
wrote:
Dear Pali Roh?r,
[snip]
Also onenand code working fine, but when is enabled u-boot binary is too big and cannot be flashed into this device. But for testing in qemu or booting u-boot with enabled onenand support stored in mmc via flashed u-boot (with disabled onenand support) working too.
Is there way how to decrease u-boot binary size?
Try compiling it in thumb mode? I think Tom Rini added support for that and tested it on omap.
Aneesh V did the real work for thumb mode for omap4/5, I just picked it up and addressed some comments. It's currently in u-boot-arm/master.
But N900 is omap3. Has u-boot thumb support for omap3 boards too?
OMAP3 has the same (CortexA8) core, it will work on it too. Dunno if it's enabled for OMAP3 now, but it shouldn't be hard to do so.
Best regards, Marek Vasut
There is one HW problem with thumb on N900: thumb mode is buggy and thumb compiled applications crashing. But finaly last month we found solution for this problem. Errata 430973 workaround, calling uboot function omap3_emu_romcode_call for setting IBE bit in AUX CR. So now Ubuntu (which is thumb compiled) booting and working.
So for using thumb mode on N900 we first need to call first that function. It is possible to build u-boot in some mixed mode (some parts in arm and some in thumb)? Now omap3_emu_romcode_call is called from misc_init_r rx51 board code.