On 20. 01. 20 2:33, Luis Araneda wrote:
From: Milan Obuch u-boot@dino.sk
The board has two push button connected to MIO pins 50 and 51, which have a pull-down resistor and are connected to 1.8V when pressed.
These two pins are wrongly initialized with internal pull-up enabled so they are reported as 1 all the time with no change when pressed.
Disable the internal pull-up to fix the issue.
Signed-off-by: Milan Obuch u-boot@dino.sk Signed-off-by: Luis Araneda luaraneda@gmail.com
This changes were originally sent by Milan Obuch using a diff format. As he didn't know how to properly send git patches to the mailing list, I converted them to a git commit, rephrased the commit message and added the Signed-off-by tags.
Milan Obuch then review and approved the current state of the patch.
Tested on a zybo z7-20 board by me
board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c index 7c6bc9fa3f..a376ba574e 100644 --- a/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c @@ -219,8 +219,8 @@ static unsigned long ps7_mio_init_data_3_0[] = { EMIT_MASKWRITE(0xF80007BC, 0x00003F01U, 0x00001201U), EMIT_MASKWRITE(0xF80007C0, 0x00003FFFU, 0x000012E0U), EMIT_MASKWRITE(0xF80007C4, 0x00003FFFU, 0x000012E1U),
- EMIT_MASKWRITE(0xF80007C8, 0x00003FFFU, 0x00001200U),
- EMIT_MASKWRITE(0xF80007CC, 0x00003FFFU, 0x00001200U),
- EMIT_MASKWRITE(0xF80007C8, 0x00003FFFU, 0x00000200U),
- EMIT_MASKWRITE(0xF80007CC, 0x00003FFFU, 0x00000200U), EMIT_MASKWRITE(0xF80007D0, 0x00003FFFU, 0x00001280U), EMIT_MASKWRITE(0xF80007D4, 0x00003FFFU, 0x00001280U), EMIT_MASKWRITE(0xF8000830, 0x003F003FU, 0x002F0037U),
Applied. M