The SD3.0 needs voltage switching to 1.8V based on host and cards capabilities and also needs to switch to one of the uhs modes based on cards capability. This supports frequencies till 200MHz. This patch define hooks to perform the same at sdhci driver level.
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com --- Changes from v1: - Split the patch with only mmc changes as per comment --- drivers/mmc/mmc-uclass.c | 52 ++++++++++++++++++ drivers/mmc/mmc.c | 138 ++++++++++++++++++++++++++++++++++++++++++++--- include/mmc.h | 55 ++++++++++++++++++- 3 files changed, 238 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 2fe5d61..3ca3e49 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -77,6 +77,58 @@ int mmc_getcd(struct mmc *mmc) { return dm_mmc_get_cd(mmc->dev); } + +int dm_mmc_set_voltage(struct udevice *dev) +{ + struct dm_mmc_ops *ops = mmc_get_ops(dev); + + if (!ops->set_voltage) + return -ENOSYS; + + return ops->set_voltage(dev); +} + +int mmc_set_voltage(struct mmc *mmc) +{ + return dm_mmc_set_voltage(mmc->dev); +} + +int dm_mmc_set_uhs(struct udevice *dev) +{ + struct dm_mmc_ops *ops = mmc_get_ops(dev); + + if (!ops->set_uhs) + return -ENOSYS; + + return ops->set_uhs(dev); +} + +int mmc_switch_uhs(struct mmc *mmc) +{ + return dm_mmc_set_uhs(mmc->dev); +} + +int dm_mmc_execute_tuning(struct udevice *dev) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); + struct dm_mmc_ops *ops = mmc_get_ops(dev); + u8 opcode; + + if (!ops->execute_tuning) + return -ENOSYS; + + if (IS_SD(mmc)) + opcode = MMC_CMD_SEND_TUNING_BLOCK; + else + opcode = MMC_CMD_SEND_TUNING_BLOCK_HS200; + + return ops->execute_tuning(dev, opcode); +} + +int mmc_execute_tuning(struct mmc *mmc) +{ + return dm_mmc_execute_tuning(mmc->dev); +} #endif
struct mmc *mmc_get_mmc_dev(struct udevice *dev) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 3648950..0f0bfc8 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -339,6 +339,47 @@ static int mmc_go_idle(struct mmc *mmc) return 0; }
+#ifndef CONFIG_DM_MMC_OPS +static int mmc_set_voltage(struct mmc *mmc) +{ + int err = 0; + + if (mmc->cfg->ops->set_voltage) { + err = mmc->cfg->ops->set_voltage(mmc); + if (err) + return err; + } + + return err; +} +#endif + +static int mmc_switch_voltage(struct mmc *mmc) +{ + struct mmc_cmd cmd; + int err = 0; + + cmd.cmdidx = SD_CMD_SWITCH_UHS18V; + cmd.cmdarg = 0; + cmd.resp_type = MMC_RSP_NONE; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) + return err; + + err = mmc_set_voltage(mmc); + + return err; +} + +static int mmc_host_uhs(struct mmc *mmc) +{ + return mmc->cfg->host_caps & + (MMC_MODE_UHS_SDR12 | MMC_MODE_UHS_SDR25 | + MMC_MODE_UHS_SDR50 | MMC_MODE_UHS_SDR104 | + MMC_MODE_UHS_DDR50); +} + static int sd_send_op_cond(struct mmc *mmc) { int timeout = 1000; @@ -371,6 +412,9 @@ static int sd_send_op_cond(struct mmc *mmc) if (mmc->version == SD_VERSION_2) cmd.cmdarg |= OCR_HCS;
+ if (mmc_host_uhs(mmc)) + cmd.cmdarg |= SD_OCR_S18R; + err = mmc_send_cmd(mmc, &cmd, NULL);
if (err) @@ -401,6 +445,13 @@ static int sd_send_op_cond(struct mmc *mmc)
mmc->ocr = cmd.response[0];
+ if (mmc->ocr & SD_OCR_S18R) { + err = mmc_switch_voltage(mmc); + if (err) + return err; + mmc->is_uhs = 1; + } + mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); mmc->rca = 0;
@@ -886,6 +937,7 @@ static int sd_change_freq(struct mmc *mmc) ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16); struct mmc_data data; int timeout; + u8 mode;
mmc->card_caps = 0;
@@ -963,6 +1015,40 @@ retry_scr: break; }
+ mode = MMC_TIMING_HS; + + if (mmc->is_uhs && mmc->version >= SD_VERSION_3) { + if (!(mmc_host_uhs(mmc))) + return 0; + + if (__be32_to_cpu(switch_status[3]) & + SD_UHS_SPEED_SDR104) { + mode = MMC_TIMING_UHS_SDR104; + mmc->card_caps |= MMC_MODE_UHS_SDR104; + mmc->tran_speed = 208000000; + } else if (__be32_to_cpu(switch_status[3]) & + SD_UHS_SPEED_SDR50) { + mode = MMC_TIMING_UHS_SDR50; + mmc->card_caps |= MMC_MODE_UHS_SDR50; + mmc->tran_speed = 100000000; + } else if (__be32_to_cpu(switch_status[3]) & + SD_UHS_SPEED_DDR50) { + mode = MMC_TIMING_UHS_DDR50; + mmc->card_caps |= MMC_MODE_UHS_DDR50; + mmc->tran_speed = 50000000; + } else if (__be32_to_cpu(switch_status[3]) & + SD_UHS_SPEED_SDR25) { + mode = MMC_TIMING_UHS_SDR25; + mmc->card_caps |= MMC_MODE_UHS_SDR25; + mmc->tran_speed = 50000000; + } else { + mode = MMC_TIMING_UHS_SDR12; + mmc->card_caps |= MMC_MODE_UHS_SDR12; + mmc->tran_speed = 25000000; + } + mmc->uhsmode = mode; + } + /* If high-speed isn't supported, we return */ if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) return 0; @@ -977,7 +1063,7 @@ retry_scr: (mmc->cfg->host_caps & MMC_MODE_HS))) return 0;
- err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status); + err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, mode, (u8 *)switch_status);
if (err) return err; @@ -1102,6 +1188,33 @@ static void mmc_set_bus_width(struct mmc *mmc, uint width)
mmc_set_ios(mmc); } +#ifndef CONFIG_DM_MMC_OPS +static int mmc_switch_uhs(struct mmc *mmc) +{ + int err = 0; + + if (mmc->cfg->ops->set_uhs) + err = mmc->cfg->ops->set_uhs(mmc); + + return err; +} + +static int mmc_execute_tuning(struct mmc *mmc) +{ + int err = 0; + u8 cmd; + + if (mmc->cfg->ops->execute_tuning) { + if (IS_SD(mmc)) + cmd = MMC_CMD_SEND_TUNING_BLOCK; + else + cmd = MMC_CMD_SEND_TUNING_BLOCK_HS200; + err = mmc->cfg->ops->execute_tuning(mmc, cmd); + } + + return err; +} +#endif
static int mmc_startup(struct mmc *mmc) { @@ -1452,11 +1565,16 @@ static int mmc_startup(struct mmc *mmc) err = sd_read_ssr(mmc); if (err) return err; - - if (mmc->card_caps & MMC_MODE_HS) - mmc->tran_speed = 50000000; - else - mmc->tran_speed = 25000000; + if (mmc->card_caps & MMC_MODE_UHS) { + err = mmc_switch_uhs(mmc); + if (err) + return err; + } else { + if (mmc->card_caps & MMC_MODE_HS) + mmc->tran_speed = 50000000; + else + mmc->tran_speed = 25000000; + } } else if (mmc->version >= MMC_VERSION_4) { /* Only version 4 of MMC supports wider bus widths */ int idx; @@ -1551,6 +1669,14 @@ static int mmc_startup(struct mmc *mmc)
mmc_set_clock(mmc, mmc->tran_speed);
+ if ((mmc->card_caps & (MMC_MODE_UHS_SDR50 | + MMC_MODE_UHS_SDR104)) && + (mmc->cfg->host_caps & MMC_MODE_NEEDS_TUNING)) { + err = mmc_execute_tuning(mmc); + if (err) + return err; + } + /* Fix the block length for DDR mode */ if (mmc->ddr_mode) { mmc->read_bl_len = MMC_MAX_BLOCK_LEN; diff --git a/include/mmc.h b/include/mmc.h index 5c94eae..56395ee 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -66,6 +66,9 @@ #define MMC_MODE_NEEDS_TUNING (1 << 11) #define MMC_MODE_HS200 (1 << 12)
+#define MMC_MODE_UHS (MMC_MODE_UHS_SDR12 | MMC_MODE_UHS_SDR25 | \ + MMC_MODE_UHS_SDR50 | MMC_MODE_UHS_SDR104 | \ + MMC_MODE_UHS_DDR50) #define SD_DATA_4BIT 0x00040000
#define IS_SD(x) ((x)->version & SD_VERSION_SD) @@ -89,6 +92,8 @@ #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_SINGLE_BLOCK 17 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_SEND_TUNING_BLOCK 19 +#define MMC_CMD_SEND_TUNING_BLOCK_HS200 21 #define MMC_CMD_SET_BLOCK_COUNT 23 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 @@ -119,12 +124,18 @@ /* SCR definitions in different words */ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 +#define SD_UHS_SPEED_SDR104 0x00080000 +#define SD_UHS_SPEED_SDR50 0x00040000 +#define SD_UHS_SPEED_DDR50 0x00100000 +#define SD_UHS_SPEED_SDR25 0x00020000
#define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 #define OCR_VOLTAGE_MASK 0x007FFF80 #define OCR_ACCESS_MODE 0x60000000
+#define SD_OCR_S18R (1 << 24) + #define MMC_ERASE_ARG 0x00000000 #define MMC_SECURE_ERASE_ARG 0x80000000 #define MMC_TRIM_ARG 0x00000001 @@ -277,6 +288,13 @@ #define MMC_NUM_BOOT_PARTITION 2 #define MMC_PART_RPMB 3 /* RPMB partition number */
+#define MMC_TIMING_UHS_SDR12 0 +#define MMC_TIMING_UHS_SDR25 1 +#define MMC_TIMING_UHS_SDR50 2 +#define MMC_TIMING_UHS_SDR104 3 +#define MMC_TIMING_UHS_DDR50 4 +#define MMC_TIMING_HS 1 + /* Driver model support */
/** @@ -364,6 +382,31 @@ struct dm_mmc_ops { * @return 0 if write-enabled, 1 if write-protected, -ve on error */ int (*get_wp)(struct udevice *dev); + + /** + * set_volatge() - Switches host for new voltage + * @dev:>-------Device to check + * + * @return 0 on success otherwise error value + */ + int (*set_voltage)(struct udevice *dev); + + /** + * set_uhs() - Sets the controller for specific uhs mode + * @dev:>-------Device to check + * + * @return 0 after setting uhs mode + */ + int (*set_uhs)(struct udevice *dev); + + /** + * execute_tuning() - Executes the required tuning sequence + * @dev:>-------Device to check + * @opcode:>----Command to be sent for tuning + * + * @return 0 on success otherwise error value + */ + int (*execute_tuning)(struct udevice *dev, u8 opcode); };
#define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) @@ -373,12 +416,17 @@ int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, int dm_mmc_set_ios(struct udevice *dev); int dm_mmc_get_cd(struct udevice *dev); int dm_mmc_get_wp(struct udevice *dev); +int dm_mmc_set_voltage(struct udevice *dev); +int dm_mmc_set_uhs(struct udevice *dev); +int dm_mmc_execute_tuning(struct udevice *dev);
/* Transition functions for compatibility */ int mmc_set_ios(struct mmc *mmc); int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); - +int mmc_set_voltage(struct mmc *mmc); +int mmc_switch_uhs(struct mmc *mmc); +int mmc_execute_tuning(struct mmc *mmc); #else struct mmc_ops { int (*send_cmd)(struct mmc *mmc, @@ -387,6 +435,9 @@ struct mmc_ops { int (*init)(struct mmc *mmc); int (*getcd)(struct mmc *mmc); int (*getwp)(struct mmc *mmc); + int (*set_voltage)(struct mmc *mmc); + int (*set_uhs)(struct mmc *mmc); + int (*execute_tuning)(struct mmc *mmc, u8 opcode); }; #endif
@@ -461,6 +512,8 @@ struct mmc { #ifdef CONFIG_DM_MMC struct udevice *dev; /* Device for this MMC controller */ #endif + u8 is_uhs; + u8 uhsmode; };
struct mmc_hwpart_conf {