+Vignesh
Hi Tom,
On 30/03/22 06:07PM, Tom Rini wrote:
This is a little tricky since SoCFPGA has code to determine this as runtime. Introduce a guard variable for platforms to select if they have a static value to use. Then for ARCH_SOCFPGA, call cm_get_qspi_controller_clk_hz() and otherwise continue the previous behavior.
Cc: Jagan Teki jagan@amarulasolutions.com Signed-off-by: Tom Rini trini@konsulko.com
arch/arm/mach-socfpga/misc_soc64.c | 1 + configs/j7200_evm_a72_defconfig | 2 ++ configs/j7200_evm_r5_defconfig | 2 ++ configs/j721e_evm_a72_defconfig | 2 ++ configs/j721e_evm_r5_defconfig | 2 ++ configs/j721e_hs_evm_a72_defconfig | 2 ++ configs/j721e_hs_evm_r5_defconfig | 2 ++ configs/j721s2_evm_a72_defconfig | 2 ++ configs/j721s2_evm_r5_defconfig | 2 ++ configs/k2g_evm_defconfig | 2 ++ configs/k2g_hs_evm_defconfig | 2 ++ configs/stv0991_defconfig | 2 ++ drivers/spi/Kconfig | 8 ++++++++ drivers/spi/cadence_qspi.c | 4 +++- drivers/spi/cadence_qspi.h | 1 + include/configs/j721e_evm.h | 1 - include/configs/j721s2_evm.h | 1 - include/configs/k2g_evm.h | 4 ---- include/configs/socfpga_common.h | 9 --------- include/configs/socfpga_soc64_common.h | 5 ----- include/configs/stv0991.h | 8 -------- 21 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-socfpga/misc_soc64.c b/arch/arm/mach-socfpga/misc_soc64.c index 7b973a79e807..2acdfad07b35 100644 --- a/arch/arm/mach-socfpga/misc_soc64.c +++ b/arch/arm/mach-socfpga/misc_soc64.c @@ -16,6 +16,7 @@ #include <errno.h> #include <init.h> #include <log.h> +#include <mach/clock_manager.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index eb1d7d46b82a..3d0d1977ff99 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -173,6 +173,8 @@ CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y +CONFIG_HAS_CQSPI_REF_CLK=y +CONFIG_CQSPI_REF_CLK=133333333 CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index e500a27bb692..0f4b006b80b5 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -134,6 +134,8 @@ CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y +CONFIG_HAS_CQSPI_REF_CLK=y +CONFIG_CQSPI_REF_CLK=133333333
This clock is configured to 166 MHz via device tree. I would prefer TI platforms to use device tree and not set CONFIG_HAS_CQSPI_REF_CLK at all. The clock _is_ 133 MHz by default but I think it is better if we just return an error when clk_get fails.
CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y
[...]
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index db680618ee9b..7209bb43a776 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -188,8 +188,10 @@ static int cadence_spi_probe(struct udevice *bus) if (plat->ref_clk_hz == 0) { ret = clk_get_by_index(bus, 0, &clk); if (ret) { -#ifdef CONFIG_CQSPI_REF_CLK +#ifdef CONFIG_HAS_CQSPI_REF_CLK plat->ref_clk_hz = CONFIG_CQSPI_REF_CLK; +#elif defined(CONFIG_ARCH_SOCFPGA)
plat->ref_clk_hz = cm_get_qspi_controller_clk_hz();
While you are here, please change all this to use if (IS_ENABLED()) instead.
#else return ret; #endif
[...]