Re: [U-Boot] [PATCH v2] board/t1024rdb: enable board-level reset when issuing reset command

On 01/11/2017 09:39 PM, Shengzhou Liu wrote:

As board-specific reset logic, it needs to issue reset signal via CPLD when issuing 'reset' command in u-boot, this patch solves the issue of reset command not working on T1024RDB.

Signed-off-by: Shengzhou Liu Shengzhou.Liu@nxp.com

v2: add build condition.

board/freescale/t102xrdb/t102xrdb.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 01dbf38..0f453a7 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; }

+#ifdef CONFIG_T1024RDB

Shengzhou

This macro is no longer used. Please use CONFIG_TARGET_T1024RDB instead.

York