Take into account all RGMII interface types. Depending on it the RGMII PHY's timings are setup.
Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com --- drivers/net/macb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c index e3003cb4a619..127d6e899bad 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -630,7 +630,7 @@ static int macb_phy_init(struct macb_device *macb, const char *name) #else /* need to consider other phy interface mode */ macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev, - PHY_INTERFACE_MODE_RGMII); + macb->phy_interface); #endif if (!macb->phydev) { printf("phy_connect failed\n"); @@ -857,7 +857,10 @@ static int _macb_init(struct macb_device *macb, const char *name) * to select interface between RMII and MII. */ #ifdef CONFIG_DM_ETH - if (macb->phy_interface == PHY_INTERFACE_MODE_RGMII) + if (macb->phy_interface == PHY_INTERFACE_MODE_RGMII || + macb->phy_interface == PHY_INTERFACE_MODE_RGMII_ID || + macb->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID || + macb->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) val = macb->config->usrio->rgmii; else if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) val = macb->config->usrio->rmii;