From: Chris Packham chris.packham@alliedtelesis.co.nz
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts.
Signed-off-by: Chris Packham judge.packham@gmail.com --- This needs http://patchwork.ozlabs.org/patch/1010285/
I imagine that the dts names may want some extra qualifiers. The boards aren't in upstream Linux (the source for our fork is published for GPL compliance) so there is some flexibility to change the name.
arch/arm/dts/Makefile | 4 +- arch/arm/dts/x530.dts | 48 +++++ arch/arm/dts/x530.dtsi | 269 ++++++++++++++++++++++++++ arch/arm/dts/x530DP.dts | 50 +++++ arch/arm/dts/x530DP.dtsi | 149 ++++++++++++++ arch/arm/mach-mvebu/Kconfig | 7 + board/alliedtelesis/common/gpio_hog.c | 36 ++++ board/alliedtelesis/common/gpio_hog.h | 13 ++ board/alliedtelesis/x530/MAINTAINERS | 12 ++ board/alliedtelesis/x530/Makefile | 9 + board/alliedtelesis/x530/kwbimage.cfg | 12 ++ board/alliedtelesis/x530/x530.c | 161 +++++++++++++++ configs/x530_defconfig | 71 +++++++ include/configs/x530.h | 134 +++++++++++++ 14 files changed, 974 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/x530.dts create mode 100644 arch/arm/dts/x530.dtsi create mode 100644 arch/arm/dts/x530DP.dts create mode 100644 arch/arm/dts/x530DP.dtsi create mode 100644 board/alliedtelesis/common/gpio_hog.c create mode 100644 board/alliedtelesis/common/gpio_hog.h create mode 100644 board/alliedtelesis/x530/MAINTAINERS create mode 100644 board/alliedtelesis/x530/Makefile create mode 100644 board/alliedtelesis/x530/kwbimage.cfg create mode 100644 board/alliedtelesis/x530/x530.c create mode 100644 configs/x530_defconfig create mode 100644 include/configs/x530.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dc6f6b233a6a..72d78d011c14 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -109,7 +109,9 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-xp-maxbcm.dtb \ armada-xp-synology-ds414.dtb \ armada-xp-theadorable.dtb \ - armada-38x-controlcenterdc.dtb + armada-38x-controlcenterdc.dtb \ + x530.dtb \ + x530DP.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \ uniphier-ld11-global.dtb \ diff --git a/arch/arm/dts/x530.dts b/arch/arm/dts/x530.dts new file mode 100644 index 000000000000..22f1c4268b7d --- /dev/null +++ b/arch/arm/dts/x530.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "x530.dtsi" + +/ { + model = "Allied Telesis x530"; + compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + nand-protect { + compatible = "atl,nand-protect"; + protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + usb-enable { + compatible = "atl,usb-enable"; + enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + boot-board { + compatible = "atl,boot-board"; + present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + phy-reset { + compatible = "atl,phy-reset"; + reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led-enable { + compatible = "atl,led-enable"; + enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; +}; diff --git a/arch/arm/dts/x530.dtsi b/arch/arm/dts/x530.dtsi new file mode 100644 index 000000000000..664fc6a8fe31 --- /dev/null +++ b/arch/arm/dts/x530.dtsi @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/gpio/gpio.h> +#include "armada-385.dtsi" + +/ { + model = "Allied Telesis x530"; + compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + aliases { + spi1 = &spi1; + i2c0 = &i2c0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + pcie-mem-aperture = <0xa0000000 0x40000000>; + }; + + eco-button-interrupt { + compatible = "atl,eco-button-interrupt"; + eco-button-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + board-reset { + compatible = "atl,phy_reset"; + /* Physical board layout of reset pin is active-low but for the + * current driver we have to set it to active-high here. + */ + phy-reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + phy-int { + compatible = "linux,uio-pdrv-genirq"; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_EDGE_BOTH>; + }; + + led-enable { + compatible = "atl,led-enable"; + led-enable-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; + + poe { + compatible = "atl,periph-poe"; + poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_BOTH>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&devbus_cs1 { + compatible = "marvell,mvebu-devbus"; + status = "okay"; + + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + nvs@0 { + status = "okay"; + + compatible = "mtd-ram"; + reg = <0 0x00080000>; + bank-width = <1>; + label = "nvs"; + }; +}; + +&gpio0 { + poe-disable { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-disable"; + }; +}; + +&gpio1 { + poe-mezz-reset { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-mezz-reset"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c@0 { /* POE devices MUX */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + rng@3b { + compatible = "maxim,ds2476"; + reg = <0x3b>; + }; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + hwmon@2d { + compatible = "adi,adt7476"; + reg = <0x2d>; + }; + + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + led_7seg_gpio: gpio@20 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + + sfpgpio: gpio@27 { /* I2C to GPIO */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + }; + + sfpmux: mux@77 { /* SFP I2C MUX */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x77>; + i2c-mux-idle-disconnect; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00e80000>; + label = "unused"; + }; + partition@idprom { + reg = <0x00fc0000 0x00040000>; + label = "idprom"; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&usb0 { + status = "okay"; +}; + +&refclk { + clock-frequency = <25000000>; +}; + +&nand_controller { /* 256 MB */ + status = "okay"; + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; +}; diff --git a/arch/arm/dts/x530DP.dts b/arch/arm/dts/x530DP.dts new file mode 100644 index 000000000000..86cbdde4bf39 --- /dev/null +++ b/arch/arm/dts/x530DP.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "x530.dtsi" +#include "x530DP.dtsi" + +/ { + model = "Allied Telesis x530"; + compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + nand-protect { + compatible = "atl,nand-protect"; + protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + usb-enable { + compatible = "atl,usb-enable"; + enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + boot-board { + compatible = "atl,boot-board"; + present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + phy-reset { + compatible = "atl,phy-reset"; + reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led-enable { + compatible = "atl,led-enable"; + enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; +}; diff --git a/arch/arm/dts/x530DP.dtsi b/arch/arm/dts/x530DP.dtsi new file mode 100644 index 000000000000..977eb4ee54fe --- /dev/null +++ b/arch/arm/dts/x530DP.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 + +&i2c0 { + mux@71 { + compatible = "nxp,pca9548"; + + i2c@1 { + hwmon@2c { + compatible = "ti,lm87"; + reg = <0x2c>; + }; + + hwmon@2d { + compatible = "ti,lm87"; + reg = <0x2d>; + }; + + hwmon@2e { + pwm-polarity = <1>; + }; + }; + + psu_a_adapter: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + psu_b_adapter: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + misc_gpio: gpio@26 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + interrupt-controller; + #interrupt-cells = <2>; + + psu_bank2 { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "psu-bank2"; + }; + }; + }; + }; +}; + +/ { + psu_slot_a { + compatible = "atl,dts-overlay-gpio-psu-slot"; + slot-name = "PSU Bay A"; + board-index = <1>; + present-gpio = <&misc_gpio 1 GPIO_ACTIVE_LOW>; + output-ok-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&misc_gpio>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; + overlay = <&psu_a_overlay>; + }; + + psu_slot_b { + compatible = "atl,dts-overlay-gpio-psu-slot"; + slot-name = "PSU Bay B"; + board-index = <2>; + present-gpio = <&misc_gpio 2 GPIO_ACTIVE_LOW>; + output-ok-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&misc_gpio>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + overlay = <&psu_b_overlay>; + }; + + fan_slot_a { + compatible = "atl,fan05-slot"; + slot-name = "Fan Bay A"; + board-index = <3>; + present-gpio = <&misc_gpio 3 GPIO_ACTIVE_LOW>; + fault-gpio = <&misc_gpio 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&misc_gpio>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + overlay = <&fan_a_overlay>; + }; +}; + +/ { + psu_a_overlay: psu_a { + fragment@0 { + target = <&psu_a_adapter>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + psu@51 { + compatible = "atl,atl-pwr-gen2"; + reg = <0x51>; + board-index = <1>; + }; + }; + }; + }; +}; + +/ { + psu_b_overlay: psu_b { + fragment@0 { + target = <&psu_b_adapter>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + psu@51 { + compatible = "atl,atl-pwr-gen2"; + reg = <0x51>; + board-index = <2>; + }; + }; + }; + }; +}; + +/ { + fan_a_overlay:fan_a { + fragment@1 { + target-path = "/"; + __overlay__ { + fan@1 { + compatible = "atl,fan05"; + board-index = <3>; + module-id-gpios = + <&misc_gpio 4 GPIO_ACTIVE_HIGH>, + <&misc_gpio 5 GPIO_ACTIVE_HIGH>, + <&misc_gpio 6 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index d1f71338ac2a..7dda04e0e34e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -132,6 +132,10 @@ config TARGET_CONTROLCENTERDC bool "Support CONTROLCENTERDC" select 88F6820
+config TARGET_X530 + bool "Support Allied Telesis x530" + select 88F6820 + endchoice
config SYS_BOARD @@ -149,6 +153,7 @@ config SYS_BOARD default "maxbcm" if TARGET_MAXBCM default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC + default "x530" if TARGET_X530
config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -165,6 +170,7 @@ config SYS_CONFIG_NAME default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC + default "x530" if TARGET_X530
config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -179,6 +185,7 @@ config SYS_VENDOR default "CZ.NIC" if TARGET_TURRIS_OMNIA default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC + default "alliedtelesis" if TARGET_X530
config SYS_SOC default "mvebu" diff --git a/board/alliedtelesis/common/gpio_hog.c b/board/alliedtelesis/common/gpio_hog.c new file mode 100644 index 000000000000..1f87b3ac1b72 --- /dev/null +++ b/board/alliedtelesis/common/gpio_hog.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Allied Telesis Labs + */ + +#include <common.h> +#include <dm.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int gpio_hog_list(struct gpio_desc *gpiod, int max_count, + const char *node_name, const char *gpio_name, int value) +{ + int node; + int count; + int i; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, node_name); + if (node < 0) + return -ENODEV; + + if (!dm_gpio_is_valid(gpiod)) { + count = + gpio_request_list_by_name_nodev(offset_to_ofnode(node), + gpio_name, gpiod, max_count, + GPIOD_IS_OUT); + if (count < 0) + return count; + + for (i = 0; i < count; i++) + dm_gpio_set_value(&gpiod[i], value); + } + + return 0; +} diff --git a/board/alliedtelesis/common/gpio_hog.h b/board/alliedtelesis/common/gpio_hog.h new file mode 100644 index 000000000000..edb744313186 --- /dev/null +++ b/board/alliedtelesis/common/gpio_hog.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017 Allied Telesis Labs + */ + +int gpio_hog_list(struct gpio_desc *gpiod, int max_count, const char *node_name, + const char *gpio_name, int value); + +static inline int gpio_hog(struct gpio_desc *gpiod, const char *node_name, + const char *gpio_name, int value) +{ + return gpio_hog_list(gpiod, 1, node_name, gpio_name, value); +} diff --git a/board/alliedtelesis/x530/MAINTAINERS b/board/alliedtelesis/x530/MAINTAINERS new file mode 100644 index 000000000000..b6cca33c083a --- /dev/null +++ b/board/alliedtelesis/x530/MAINTAINERS @@ -0,0 +1,12 @@ +x530 BOARD +M: Chris Packham chris.packham@alliedtelesis.co.nz +S: Maintained +F: board/alliedtelesis/x530/ +F: board/alliedtelesis/common/gpio_hog.c +F: board/alliedtelesis/common/gpio_hog.h +F: arch/arm/dts/x530.dts +F: arch/arm/dts/x530.dtsi +F: arch/arm/dts/x530DP.dts +F: arch/arm/dts/x530DP.dtsi +F: include/configs/x530.h +F: configs/x530_defconfig diff --git a/board/alliedtelesis/x530/Makefile b/board/alliedtelesis/x530/Makefile new file mode 100644 index 000000000000..97de1d463fe8 --- /dev/null +++ b/board/alliedtelesis/x530/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2017 Allied Telesis Labs +# + +obj-y := $(BOARD).o +ifndef CONFIG_SPL_BUILD +obj-y += ../common/gpio_hog.o +endif diff --git a/board/alliedtelesis/x530/kwbimage.cfg b/board/alliedtelesis/x530/kwbimage.cfg new file mode 100644 index 000000000000..f58d388825e7 --- /dev/null +++ b/board/alliedtelesis/x530/kwbimage.cfg @@ -0,0 +1,12 @@ +# +# Copyright (C) 2017 Allied Telesis Labs +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM spi + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c new file mode 100644 index 000000000000..b34ae5134547 --- /dev/null +++ b/board/alliedtelesis/x530/x530.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Allied Telesis Labs + */ + +#include <common.h> +#include <command.h> +#include <dm.h> +#include <i2c.h> +#include <asm/gpio.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include "../common/gpio_hog.h" + +#include "../drivers/ddr/marvell/a38x/ddr3_init.h" +#include <../serdes/a38x/high_speed_env_spec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define MVEBU_DEV_BUS_BASE (MVEBU_REGISTER(0x10400)) + +#define CONFIG_NVS_LOCATION 0xf4800000 +#define CONFIG_NVS_SIZE (512 << 10) + +static struct serdes_map board_serdes_map[] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) +{ + *serdes_map_array = board_serdes_map; + *count = ARRAY_SIZE(board_serdes_map); + return 0; +} + +/* + * Define the DDR layout / topology here in the board file. This will + * be used by the DDR3 init code in the SPL U-Boot version to configure + * the DDR3 controller. + */ +static struct mv_ddr_topology_map board_topology_map = { + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ + { { { {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0} }, + SPEED_BIN_DDR_1866M, /* speed_bin */ + MV_DDR_DEV_WIDTH_16BIT, /* sdram device width */ + MV_DDR_DIE_CAP_4GBIT, /* die capacity */ + MV_DDR_FREQ_933, /* frequency */ + 0, 0, /* cas_l cas_wl */ + MV_DDR_TEMP_LOW, /* temperature */ + MV_DDR_TIM_2T} }, /* timing */ + BUS_MASK_32BIT_ECC, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + { {0} }, /* raw spd data */ + {0} /* timing parameters */ +}; + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x00001111, MVEBU_MPP_BASE + 0x00); + writel(0x00000000, MVEBU_MPP_BASE + 0x04); + writel(0x55000000, MVEBU_MPP_BASE + 0x08); + writel(0x55550550, MVEBU_MPP_BASE + 0x0c); + writel(0x55555555, MVEBU_MPP_BASE + 0x10); + writel(0x00100565, MVEBU_MPP_BASE + 0x14); + writel(0x40000000, MVEBU_MPP_BASE + 0x18); + writel(0x00004444, MVEBU_MPP_BASE + 0x1c); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + /* window for NVS */ + mbus_dt_setup_win(&mbus_state, CONFIG_NVS_LOCATION, CONFIG_NVS_SIZE, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS1); + + /* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */ + writel(0x00004001, MVEBU_DEV_BUS_BASE + 0xc8); + + return 0; +} + +static int led_7seg_init(unsigned int segments) +{ + int node; + int ret; + int i; + struct gpio_desc desc[8]; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, + "atl,of-led-7seg"); + if (node < 0) + return -ENODEV; + + ret = gpio_request_list_by_name_nodev(offset_to_ofnode(node), + "segment-gpios", desc, + ARRAY_SIZE(desc), GPIOD_IS_OUT); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(desc); i++) { + ret = dm_gpio_set_value(&desc[i], !(segments & BIT(i))); + if (ret) + return ret; + } + + return 0; +} + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + static struct gpio_desc usb_en = {}, nand_wp = {}, phy_reset[2] = {}, + led_en = {}; + + gpio_hog(&usb_en, "atl,usb-enable", "enable-gpio", 1); + gpio_hog(&nand_wp, "atl,nand-protect", "protect-gpio", 1); + gpio_hog_list(phy_reset, ARRAY_SIZE(phy_reset), "atl,phy-reset", "reset-gpio", 0); + gpio_hog(&led_en, "atl,led-enable", "enable-gpio", 1); + +#ifdef MTDPARTS_MTDOOPS + env_set("mtdoops", MTDPARTS_MTDOOPS); +#endif + + led_7seg_init(0xff); + + return 0; +} +#endif + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board: " CONFIG_SYS_BOARD "\n"); + + return 0; +} +#endif diff --git a/configs/x530_defconfig b/configs/x530_defconfig new file mode 100644 index 000000000000..a9f1344a18d2 --- /dev/null +++ b/configs/x530_defconfig @@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00800000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_X530=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SILENT_CONSOLE=y +CONFIG_SILENT_U_BOOT_ONLY=y +CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y +CONFIG_MISC_INIT_R=y +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_DEFAULT_DEVICE_TREE="x530" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_BLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_MISC=y +# CONFIG_MMC is not set +CONFIG_NAND=y +CONFIG_NAND_PXA3XX=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_MTD_UBI=y +CONFIG_PCI=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y diff --git a/include/configs/x530.h b/include/configs/x530.h new file mode 100644 index 000000000000..a1ef301d35e0 --- /dev/null +++ b/include/configs/x530.h @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Allied Telesis Labs + */ + +#ifndef _CONFIG_X530_H +#define _CONFIG_X530_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#if !defined(CONFIG_DM_SERIAL) +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE +#endif + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_PCI + +/* NAND */ +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define BBT_CUSTOM_SCAN +#define BBT_CUSTOM_SCAN_PAGE 0 +#define BBT_CUSTOM_SCAN_POSITION 2048 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)" +#define MTDPARTS_MTDOOPS "errlog" + +/* Partition support */ + +/* Additional FS support/configuration */ + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_SCAN_SHOW +#endif + +/* NAND */ +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_SYS_MALLOC_LEN (4 << 20) + +#include <asm/arch/config.h> + +/* + * Other required minimal configurations + */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in low memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_UBI_PART user +#define CONFIG_UBIFS_VOLUME user + +/* SPL */ + +/* Defines for SPL */ +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS + +#endif /* _CONFIG_X530_H */