This is a "hex" prompt but the default value was given as an int. Switch the default to hex (0x0) and remove the defconfigs that were using the default, but as hex before.
Signed-off-by: Tom Rini trini@konsulko.com --- configs/imx6q_logic_defconfig | 1 - configs/phycore-imx8mm_defconfig | 1 - configs/phycore-imx8mp_defconfig | 1 - configs/xilinx_versal_virt_defconfig | 1 - configs/xilinx_zynq_virt_defconfig | 1 - configs/xilinx_zynqmp_virt_defconfig | 1 - drivers/misc/Kconfig | 2 +- 7 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 54029adba4a9..3f59b99faf76 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -77,7 +77,6 @@ CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 82a52e283550..ff28488ca2f6 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -76,7 +76,6 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 367f0d751c02..ceb3c20bc515 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -77,7 +77,6 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 11598623954d..071c14286687 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -62,7 +62,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index f343430f5d07..64efb69cfb7f 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -84,7 +84,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_MTD=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 687b41bfb148..dc845899d171 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -124,7 +124,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3bae07200583..33a825925441 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -416,7 +416,7 @@ if I2C_EEPROM
config SYS_I2C_EEPROM_ADDR_OVERFLOW hex "EEPROM Address Overflow" - default 0 + default 0x0 help EEPROM chips that implement "address overflow" are ones like Catalyst 24WC04/08/16 which has 9/10/11 bits of