From: Jason Cooper u-boot@lakedaemon.net
This is my first attempt at adding the Marvell Dreamplug to U-Boot.
It compiles clean, and I've loaded it via JTAG and used it to dump the existing bootloader out of the SPI flash. I have _not_ used it to burn itself to the flash yet. I'm looking for comments before I try that. ;-)
Some concerns:
1.) does the 'make all' support need to be last? I've used rebase to edit patches and commits, but I've never reshuffled. Each patch compiles clean.
2.) The SPI flash chip is a Macronix MX25L1606, however it has the identical chip idcode to the MX25L1605. How is that properly handled? The 06 does have some new features [1].
3.) I added the board number [2], etc to asm/mach-types.h even though it says to not to. ;-) Is there a proper way to do it? If it's copied from the Linux kernel, it hasn't been updated in a while...
[1] http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Inde... [2] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550
Jason Cooper (3): dreamplug: Initial support. dreamplug: include in 'make all' dreamplug: switch from NAND flash to SPI flash.
MAKEALL | 1 + arch/arm/include/asm/mach-types.h | 13 +++ board/Marvell/dreamplug/Makefile | 51 +++++++++++ board/Marvell/dreamplug/dreamplug.c | 153 ++++++++++++++++++++++++++++++++ board/Marvell/dreamplug/dreamplug.h | 39 ++++++++ board/Marvell/dreamplug/kwbimage.cfg | 160 ++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/dreamplug.h | 111 +++++++++++++++++++++++ 8 files changed, 529 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/dreamplug/Makefile create mode 100644 board/Marvell/dreamplug/dreamplug.c create mode 100644 board/Marvell/dreamplug/dreamplug.h create mode 100644 board/Marvell/dreamplug/kwbimage.cfg create mode 100644 include/configs/dreamplug.h