Hi,
I noticed a problem while testing Wolfgang's patch
PPC: fix "Warning: FOO uses hard float, BAR uses soft float".
U-Boot built for TQM5200 using ELDK-5.1 powerpc toolchain seems to have issues in CPU POST test. I see similar problem both with and also without Wolfgang's patch applied:
U-Boot 2011.12-rc3-00002-gaf44f4b (Dec 23 2011 - 00:08:10)
CPU: MPC5200 v1.2, Core v1.1 at 396 MHz Bus 132 MHz, IPB 132 MHz, PCI 66 MHz Board: TQM5200 (TQ-Components GmbH) on a STK52xx carrier board I2C: 85 kHz, ready DRAM: 64 MiB Flash: 32 MiB In: serial Out: serial Err: serial Net: FEC POST i2c PASSED POST cpu Error at multi test ! FAILED ^^^^^^
IDE: Bus 0: OK Device 0: Model: 32MB CHH Firm: Rev 1.01 Ser#: 403303C48A30730031 Type: Removable Hard Disk Capacity: 30.5 MB = 0.0 GB (62592 x 512) Device 1: not available SRAM: 512 kB VGA: SMI501 (Voyager) with 8 MB PS/2: No device found Kbd: reset failed, no ACK
Type run flash_nfs to mount root filesystem over NFS
Anatolij