On Thu, Nov 1, 2012 at 3:14 PM, Stephen Warren swarren@wwwdotorg.org wrote:
From: Stephen Warren swarren@nvidia.com
TrimSlice's USB1 port has two purposes; it either acts as a device port hosting Tegra's USB recovery protocol, or acts as a host port connected to the internal USB->SATA bridge chip, which may in turn be connected to an SSD or HDD. Add the appropriate device tree and board configuration options to enable this port as a host port, and route the port to the SATA bridge using the VBUS GPIO.
Signed-off-by: Stephen Warren swarren@nvidia.com
Looks right to me.
Acked-by: Simon Glass sjg@chromium.org
board/compulab/dts/tegra20-trimslice.dts | 3 ++- board/compulab/trimslice/trimslice.c | 8 ++++++++ include/configs/trimslice.h | 1 + 3 files changed, 11 insertions(+), 1 deletions(-)