Dear sunr2007,
In message 25236687.post@talk.nabble.com you wrote:
I was using u-boot-1.1.5 all these days. so i decided to use SPI API improvements and some other improvements. so i switched to u-boot 1.3.4 . I'm using AT91SAM9261 board cross compiler with GCC 3.4.1. i was able to
May I ask why you decided to switch from an ancient to a very old version, and not to a current one?
U-Boot 1.3.4 is more than a year old. Current release is v2009.08
Also, GCC 3.4.x is very, very old.
Why are you not using a recent tool chain?
compile the u-boot but only few of files compiled. in the /common/ directory i want to compile cmd_fat.c and cmd_spi.c . though these files are there in Makefile im unable to compile. may i know what i need to do to compile these files in u-boot? do i need to enable something? thanks.:confused:
I don't know what you are doing, buyt I can teel you that U-Boot releases 1.3.4 and 2009.08 build fine in all our tests; we used ELDK 3.1.1 (gcc 3.3.3) through ELDK 4.2 (gcc 4.2.2) for this.
If you have problems, then you either must be doing something wrong, oryour tool chain is broken - but you don't provide enough information for any diagnosis of the actual problem.
Best regards,
Wolfgang Denk