Re: [U-Boot-Users] Booting with attached BDI but not alone

DI BACCO ANTONIO - technolabs wrote:

Hi,

I downloaded an u-boot.bin (1.1.4) on to my flash (a board with MPC875). If I connect BDI and type go I see output on my serial console. If I start the board without the attached BDI nothing appears.

Any hint?

---

This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

---

---

U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

Maybe your BDI config file initializes something that U-boot doesn't. If you take everything out of the [INIT] section, do you get the same behavior?

regards, Ben