[U-Boot] [PATCH v1 5/5] board: toradex: add Colibri iMX6ULL support

From: Stefan Agner stefan.agner@toradex.com

Add support for the Colibri iMX6ULL module which comes with on-board raw NAND.

Signed-off-by: Stefan Agner stefan.agner@toradex.com ---

arch/arm/dts/imx6ull-colibri.dts | 550 ++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 8 + board/toradex/colibri-imx6ull/Kconfig | 29 + board/toradex/colibri-imx6ull/MAINTAINERS | 10 + board/toradex/colibri-imx6ull/Makefile | 4 + .../toradex/colibri-imx6ull/colibri-imx6ull.c | 408 +++++++++++++ board/toradex/colibri-imx6ull/imximage.cfg | 106 ++++ configs/colibri-imx6ull_defconfig | 76 +++ include/configs/colibri-imx6ull.h | 199 +++++++ 9 files changed, 1390 insertions(+) create mode 100644 arch/arm/dts/imx6ull-colibri.dts create mode 100644 board/toradex/colibri-imx6ull/Kconfig create mode 100644 board/toradex/colibri-imx6ull/MAINTAINERS create mode 100644 board/toradex/colibri-imx6ull/Makefile create mode 100644 board/toradex/colibri-imx6ull/colibri-imx6ull.c create mode 100644 board/toradex/colibri-imx6ull/imximage.cfg create mode 100644 configs/colibri-imx6ull_defconfig create mode 100644 include/configs/colibri-imx6ull.h

diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts new file mode 100644 index 0000000000..95c67be438 --- /dev/null +++ b/arch/arm/dts/imx6ull-colibri.dts @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx6ull.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL"; + compatible = "toradex,imx6ull-colibri", "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "+V3.3_AVDD_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-gpio"; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_reg_sd>; + regulator-always-on; + regulator-name = "+V3.3_1.8_SD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <1800000 0x1 3300000 0x0>; + vin-supply = <&reg_module_3v3>; + }; +}; + +&adc1 { + num-channels = <10>; + vref-supply = <&reg_module_3v3_avdd>; +}; + +/* Colibri SPI */ +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <&ethphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; + + ad7879@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + #pwm-cells = <3>; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + #pwm-cells = <3>; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + #pwm-cells = <3>; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + #pwm-cells = <3>; +}; + +&sdma { + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; + fsl,uart-has-rtscts; + fsl,dte-mode; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + fsl,dte-mode; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,dte-mode; +}; + +&usbotg1 { + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; +}; + +&usbotg2 { + dr_mode = "host"; +}; + +&usdhc1 { + assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_gpio1: gpio1-grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */ + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */ + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */ + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x14 /* SODIMM 135 */ + MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x14 /* SODIMM 100 */ + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x14 /* SODIMM 102 */ + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x14 /* SODIMM 104 */ + MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x14 /* SODIMM 186 */ + >; + }; + + pinctrl_gpio2: gpio2-grp { /* Camera */ + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x74 /* SODIMM 69 */ + MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x14 /* SODIMM 75 */ + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x14 /* SODIMM 85 */ + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x14 /* SODIMM 96 */ + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3-grp { /* CAN2 */ + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x14 /* SODIMM 178 */ + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x14 /* SODIMM 188 */ + >; + }; + + pinctrl_gpio4: gpio4-grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x74 /* SODIMM 65 */ + >; + }; + + pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x74 /* SODIMM 106 */ + >; + }; + + pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x14 /* SODIMM 89 */ + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x14 /* SODIMM 79 */ + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x14 /* SODIMM 81 */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x14 /* SODIMM 97 */ + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x14 /* SODIMM 101 */ + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x14 /* SODIMM 103 */ + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x14 /* SODIMM 94 */ + >; + }; + + pinctrl_can_int: canint-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14 /* SODIMM 73 */ + >; + }; + + pinctrl_enet2: enet2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + >; + }; + + pinctrl_ecspi1_cs: ecspi1-cs-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio_bl_on: gpio-bl-on-grp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand-grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x100a9 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x100a9 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x100a9 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x100a9 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x100a9 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x100a9 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x100a9 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x100a9 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x100a9 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x100a9 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x100a9 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x100a9 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdif-dat-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 + >; + }; + + pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 + >; + }; + + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 + >; + }; + + pinctrl_pwm5: pwm5-grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 + >; + }; + + pinctrl_pwm6: pwm6-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 + >; + }; + + pinctrl_pwm7: pwm7-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 + MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 + MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + fsl,pins = < + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b0b1 /* DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b0b1 /* RI */ + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 + >; + }; + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 + >; + }; + + pinctrl_usbh_reg: gpio-usbh-reg { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x1b0b1 /* SODIMM 129 USBH PEN */ + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_snvs_gpio1: snvs-gpio1-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x14 /* SODIMM 93 */ + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x14 /* SODIMM 95 */ + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x74 /* SODIMM 105 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x14 /* SODIMM 131 USBH OC */ + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x74 /* SODIMM 138 */ + >; + }; + + pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x74 /* SODIMM 107 */ + >; + }; + + pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + fsl,pins = < + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 /* SODIMM 127 */ + >; + }; + + pinctrl_snvs_ad7879_int: snvs-ad7879-int { /* TOUCH Interrupt */ + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0 + >; + }; + + pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130b0 + >; + }; + + pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* CD */ + >; + }; + + pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 + >; + }; +}; + diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 98ea1f566c..4237887db1 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -147,6 +147,13 @@ config TARGET_COLIBRI_IMX6 select DM_SERIAL select DM_THERMAL

+config TARGET_COLIBRI_IMX6ULL + bool "Toradex Colibri iMX6ULL" + select BOARD_LATE_INIT + select DM + select DM_THERMAL + select MX6ULL + config TARGET_DHCOMIMX6 bool "dh_imx6" select MX6QDL @@ -507,6 +514,7 @@ source "board/tbs/tbs2910/Kconfig" source "board/tqc/tqma6/Kconfig" source "board/toradex/apalis_imx6/Kconfig" source "board/toradex/colibri_imx6/Kconfig" +source "board/toradex/colibri-imx6ull/Kconfig" source "board/k+p/kp_imx6q_tpc/Kconfig" source "board/udoo/Kconfig" source "board/udoo/neo/Kconfig" diff --git a/board/toradex/colibri-imx6ull/Kconfig b/board/toradex/colibri-imx6ull/Kconfig new file mode 100644 index 0000000000..3ce9885c12 --- /dev/null +++ b/board/toradex/colibri-imx6ull/Kconfig @@ -0,0 +1,29 @@ +if TARGET_COLIBRI_IMX6ULL + +config SYS_BOARD + default "colibri-imx6ull" + +config SYS_VENDOR + default "toradex" + +config SYS_CONFIG_NAME + default "colibri-imx6ull" + +config TDX_CFG_BLOCK + default y + +config TDX_HAVE_NAND + default y + +config TDX_CFG_BLOCK_OFFSET + default "2048" + +config TDX_CFG_BLOCK_OFFSET2 + default "133120" + +config TDX_CFG_BLOCK_2ND_ETHADDR + default y + +source "board/toradex/common/Kconfig" + +endif diff --git a/board/toradex/colibri-imx6ull/MAINTAINERS b/board/toradex/colibri-imx6ull/MAINTAINERS new file mode 100644 index 0000000000..7cda555984 --- /dev/null +++ b/board/toradex/colibri-imx6ull/MAINTAINERS @@ -0,0 +1,10 @@ +Colibri iMX6ULL +M: Stefan Agner stefan.agner@toradex.com +M: Toradex ARM Support support.arm@toradex.com +W: http://developer.toradex.com/software/linux/linux-software +W: https://www.toradex.com/community +S: Maintained +F: arch/arm/dts/imx6ull-colibri.dts +F: board/toradex/colibri-imx6ull/ +F: configs/colibri-imx6ull_defconfig +F: include/configs/colibri-imx6ull.h diff --git a/board/toradex/colibri-imx6ull/Makefile b/board/toradex/colibri-imx6ull/Makefile new file mode 100644 index 0000000000..f478e68049 --- /dev/null +++ b/board/toradex/colibri-imx6ull/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2018 Toradex AG + +obj-y := colibri-imx6ull.o diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c new file mode 100644 index 0000000000..fcb49a0718 --- /dev/null +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Toradex AG + */ +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch-mx6/clock.h> +#include <asm/arch-mx6/imx-regs.h> +#include <asm/arch-mx6/mx6ull_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/io.h> +#include <common.h> +#include <dm.h> +#include <dm/platform_data/serial_mxc.h> +#include <fdt_support.h> +#include <fsl_esdhc.h> +#include <imx_thermal.h> +#include <jffs2/load_kernel.h> +#include <linux/sizes.h> +#include <mmc.h> +#include <miiphy.h> +#include <mtd_node.h> +#include <netdev.h> +#include <usb.h> +#include <usb/ehci-ci.h> +#include "../common/tdx-common.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_40ohm) + +#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm) + +#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_DSE_48ohm) + +#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) + +#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP) + +#define USB_CDET_GPIO IMX_GPIO_NR(7, 14) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RTS_B__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_CTS_B__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +#ifdef CONFIG_FSL_ESDHC +static iomux_v3_cfg_t const usdhc1_pads[] = { + MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; +#endif + +static iomux_v3_cfg_t const usb_cdet_pads[] = { + MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +#ifdef CONFIG_NAND_MXS +static iomux_v3_cfg_t const gpmi_pads[] = { + MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), +}; + +static void setup_gpmi_nand(void) +{ + imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); + + setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) | + (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET)); +} +#endif + +#ifdef CONFIG_VIDEO_MXS +static iomux_v3_cfg_t const lcd_pads[] = { + MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_ENABLE__LCDIF_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_HSYNC__LCDIF_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA00__LCDIF_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA01__LCDIF_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA02__LCDIF_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA03__LCDIF_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA04__LCDIF_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA05__LCDIF_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA06__LCDIF_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA07__LCDIF_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA08__LCDIF_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA09__LCDIF_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA10__LCDIF_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA11__LCDIF_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA12__LCDIF_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA13__LCDIF_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA14__LCDIF_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA15__LCDIF_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA16__LCDIF_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD_DATA17__LCDIF_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), +}; + +static iomux_v3_cfg_t const backlight_pads[] = { + /* Backlight On */ + MX6_PAD_JTAG_TMS__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* Backlight PWM<A> (multiplexed pin) */ + MX6_PAD_NAND_WP_B__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +#define GPIO_BL_ON IMX_GPIO_NR(1, 11) +#define GPIO_PWM_A IMX_GPIO_NR(4, 11) + +static int setup_lcd(void) +{ + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); + + imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads)); + + /* Set BL_ON */ + gpio_request(GPIO_BL_ON, "BL_ON"); + gpio_direction_output(GPIO_BL_ON, 1); + + /* Set PWM<A> to full brightness (assuming inversed polarity) */ + gpio_request(GPIO_PWM_A, "PWM<A>"); + gpio_direction_output(GPIO_PWM_A, 0); + + return 0; +} +#endif + +#ifdef CONFIG_FEC_MXC +static iomux_v3_cfg_t const fec2_pads[] = { + MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION, + MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), + MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), + MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static void setup_iomux_fec(void) +{ + imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads)); +} +#endif + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#ifdef CONFIG_FSL_ESDHC + +#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) + +static struct fsl_esdhc_cfg usdhc_cfg[] = { + {USDHC1_BASE_ADDR, 0, 4}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + int i, ret; + + /* USDHC1 is mmc0 */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); + gpio_direction_input(USDHC1_CD_GPIO); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} +#endif + +#ifdef CONFIG_FEC_MXC + +static int setup_fec(void) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + int ret; + + setup_iomux_fec(); + + /* provide the PHY clock from the i.MX 6 */ + ret = enable_fec_anatop_clock(1, ENET_50MHZ); + if (ret) + return ret; + + /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */ + clrsetbits_le32(&iomuxc_regs->gpr[1], + IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK, + IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + +#ifdef CONFIG_NAND_MXS + setup_gpmi_nand(); +#endif + +#ifdef CONFIG_VIDEO_MXS + setup_lcd(); +#endif + +#ifdef CONFIG_USB_EHCI_MX6 + imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads)); + gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); +#endif + + return 0; +} + +#ifdef CONFIG_CMD_BMODE +/* TODO */ +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)}, + {"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int board_late_init(void) +{ + int minc, maxc; + + if (get_cpu_temp_grade(&minc, &maxc) != TEMP_COMMERCIAL) + env_set("variant", "-wifi"); + +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + +#ifdef CONFIG_CMD_USB_SDP + if (is_boot_from_usb()) { + printf("Serial Downloader recovery mode, using sdp command\n"); + env_set("bootdelay", "0"); + env_set("bootcmd", "sdp 0"); + } +#endif /* CONFIG_CMD_USB_SDP */ + + return 0; +} + +int checkboard(void) +{ + printf("Model: Toradex Colibri iMX6ULL\n"); + + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_FDT_FIXUP_PARTITIONS) + static struct node_info nodes[] = { + { "fsl,imx6ull-gpmi-nand", MTD_DEV_TYPE_NAND, }, + { "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, + }; + + /* Update partition nodes using info from mtdparts env var */ + puts(" Updating MTD partitions...\n"); + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); +#endif + + return ft_common_board_setup(blob, bd); +} +#endif + +#ifdef CONFIG_USB_EHCI_MX6 +static iomux_v3_cfg_t const usb_otg2_pads[] = { + MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + break; + case 1: + imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, + ARRAY_SIZE(usb_otg2_pads)); + break; + default: + return -EINVAL; + } + return 0; +} + +int board_usb_phy_mode(int port) +{ + switch (port) { + case 0: + if (gpio_get_value(USB_CDET_GPIO)) + return USB_INIT_DEVICE; + else + return USB_INIT_HOST; + case 1: + default: + return USB_INIT_HOST; + } +} +#endif + +static struct mxc_serial_platdata mxc_serial_plat = { + .reg = (struct mxc_uart *)UART1_BASE, + .use_dte = 1, +}; + +U_BOOT_DEVICE(mxc_serial) = { + .name = "serial_mxc", + .platdata = &mxc_serial_plat, +}; diff --git a/board/toradex/colibri-imx6ull/imximage.cfg b/board/toradex/colibri-imx6ull/imximage.cfg new file mode 100644 index 0000000000..2ce55a610a --- /dev/null +++ b/board/toradex/colibri-imx6ull/imximage.cfg @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright (C) 2018 Toradex AG + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : nand + */ + +BOOT_FROM nand + +/* + * Secure boot support + */ +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Enable all clocks */ +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff + +DATA 4 0x020E04B4 0x000C0000 +DATA 4 0x020E04AC 0x00000000 +DATA 4 0x020E027C 0x00000030 +DATA 4 0x020E0250 0x00000030 +DATA 4 0x020E024C 0x00000030 +DATA 4 0x020E0490 0x00000030 +DATA 4 0x020E0288 0x000C0030 +DATA 4 0x020E0270 0x00000000 +DATA 4 0x020E0260 0x00000030 +DATA 4 0x020E0264 0x00000030 +DATA 4 0x020E04A0 0x00000030 +DATA 4 0x020E0494 0x00020000 +DATA 4 0x020E0280 0x00000030 +DATA 4 0x020E0284 0x00000030 +DATA 4 0x020E04B0 0x00020000 +DATA 4 0x020E0498 0x00000030 +DATA 4 0x020E04A4 0x00000030 +DATA 4 0x020E0244 0x00000030 +DATA 4 0x020E0248 0x00000030 +DATA 4 0x021B001C 0x00008000 +DATA 4 0x021B0800 0xA1390003 +DATA 4 0x021B080C 0x00000004 +DATA 4 0x021B083C 0x41640158 +DATA 4 0x021B0848 0x40403237 +DATA 4 0x021B0850 0x40403C33 +DATA 4 0x021B081C 0x33333333 +DATA 4 0x021B0820 0x33333333 +DATA 4 0x021B082C 0xf3333333 +DATA 4 0x021B0830 0xf3333333 +DATA 4 0x021B08C0 0x00944009 +DATA 4 0x021B08b8 0x00000800 +DATA 4 0x021B0004 0x0002002D +DATA 4 0x021B0008 0x1B333030 +DATA 4 0x021B000C 0x676B52F3 +DATA 4 0x021B0010 0xB66D0B63 +DATA 4 0x021B0014 0x01FF00DB +DATA 4 0x021B0018 0x00201740 +DATA 4 0x021B001C 0x00008000 +DATA 4 0x021B002C 0x000026D2 +DATA 4 0x021B0030 0x006B1023 +DATA 4 0x021B0040 0x0000004F +DATA 4 0x021B0000 0x84180000 +DATA 4 0x021B0890 0x00400000 +DATA 4 0x021B001C 0x02008032 +DATA 4 0x021B001C 0x00008033 +DATA 4 0x021B001C 0x00048031 +DATA 4 0x021B001C 0x15208030 +DATA 4 0x021B001C 0x04008040 +DATA 4 0x021B0020 0x00000800 +DATA 4 0x021B0818 0x00000227 +DATA 4 0x021B0004 0x0002552D +DATA 4 0x021B0404 0x00011006 +DATA 4 0x021B001C 0x00000000 + diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig new file mode 100644 index 0000000000..a6db0b8c6a --- /dev/null +++ b/configs/colibri-imx6ull_defconfig @@ -0,0 +1,76 @@ +CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y +# CONFIG_SPL_SYS_THUMB_BUILD is not set +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_TARGET_COLIBRI_IMX6ULL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri-imx6ull/imximage.cfg,MX6ULL,IMX_NAND" +CONFIG_BOOTDELAY=1 +# CONFIG_USE_BOOTCOMMAND is not set +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_PROMPT="Colibri iMX6ULL # " +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +CONFIG_CMD_ASKENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +# CONFIG_RANDOM_UUID is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_NAND_TORTURE=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_UBI=y +# CONFIG_ISO_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_DFU_MMC=y +CONFIG_DFU_NAND=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_NAND=y +CONFIG_NAND_MXS=y +CONFIG_NAND_MXS_DT=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_NETDEVICES=y +CONFIG_FEC_MXC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Toradex" +CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 +CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_SDP=y +CONFIG_VIDEO=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h new file mode 100644 index 0000000000..7661000b45 --- /dev/null +++ b/include/configs/colibri-imx6ull.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 Toradex AG + * + * Configuration settings for the Colibri iMX6ULL module. + * + * based on colibri_imx7.h + */ + +#ifndef __COLIBRI_IMX6ULL_CONFIG_H +#define __COLIBRI_IMX6ULL_CONFIG_H + +#include "mx6_common.h" +#define CONFIG_IOMUX_LPSR + +/* #define CONFIG_DBG_MONITOR*/ +#define PHYS_SDRAM_SIZE SZ_512M + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +/* Network */ +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_IP_DEFRAG +#define CONFIG_TFTP_BLOCKSIZE 16352 +#define CONFIG_TFTP_TSIZE + +/* ENET1 */ +#define IMX_FEC_BASE ENET2_BASE_ADDR + +/* MMC Config*/ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +/* I2C configs */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb" + +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "fdt_addr_r=0x82000000\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x87100000\0" \ + "ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x87000000\0" + +#define NFS_BOOTCMD \ + "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ + "nfsboot=run setup; " \ + "setenv bootargs ${defargs} ${nfsargs} " \ + "${setupargs} ${vidargs}; echo Booting from NFS...;" \ + "dhcp ${kernel_addr_r} && " \ + "tftp ${fdt_addr_r} " FDT_FILE " && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + +#define SD_BOOTCMD \ + "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ + "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ + "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ + "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ + "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + +#define UBI_BOOTCMD \ + "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ + "ubi.fm_autoconvert=1\0" \ + "ubiboot=run setup; " \ + "setenv bootargs ${defargs} ${ubiargs} " \ + "${setupargs} ${vidargs}; echo Booting from NAND...; " \ + "ubi part ubi &&" \ + "ubi read ${kernel_addr_r} kernel && " \ + "ubi read ${fdt_addr_r} dtb && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + +#define CONFIG_BOOTCOMMAND "run ubiboot; " \ + "setenv fdtfile " FDT_FILE " && run distro_bootcmd;" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + MEM_LAYOUT_ENV_SETTINGS \ + NFS_BOOTCMD \ + SD_BOOTCMD \ + UBI_BOOTCMD \ + "console=ttymxc0\0" \ + "defargs=user_debug=30\0" \ + "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ + "fdt_board=eval-v3\0" \ + "fdt_fixup=;\0" \ + "ip_dyn=yes\0" \ + "kernel_file=zImage\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ + "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ + "${board}/flash_eth.img && source ${loadaddr}\0" \ + "setsdupdate=mmc rescan && setenv interface mmc && " \ + "fatload ${interface} 0:1 ${loadaddr} " \ + "${board}/flash_blk.img && source ${loadaddr}\0" \ + "setup=setenv setupargs " \ + "console=tty1 console=${console}" \ + ",${baudrate}n8 ${memargs} consoleblank=0\0" \ + "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ + "setusbupdate=usb start && setenv interface usb && " \ + "fatload ${interface} 0:1 ${loadaddr} " \ + "${board}/flash_blk.img && source ${loadaddr}\0" \ + "splashpos=m,m\0" \ + "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ + "vidargs=video=mxsfb:640x480-16@60" + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#if defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#endif + +/* NAND stuff */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ +#define CONFIG_SYS_NAND_BASE -1 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_USE_FLASH_BBT + +/* Dynamic MTD partition support */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \ + "512k(mx6ull-bcb)," \ + "1536k(u-boot1)ro," \ + "1536k(u-boot2)ro," \ + "512k(u-boot-env)," \ + "-(ubi)" + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#define CONFIG_IMX_THERMAL + +#define CONFIG_USBD_HS + +/* USB Device Firmware Update support */ +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_MXS +#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR +#define CONFIG_VIDEO_LOGO +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#endif