Introduce a defconfig for the Ride R3 and other QCS9100 boards with a dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Signed-off-by: Varadarajan Narayanan quic_varada@quicinc.com --- v3: Removed duplicates CONFIG_ARM, CONFIG_PHY_QCOM_QMP_UFS & CONFIG_QCOM_UFS v2: Use qcs9100-ride-r3 for default DT instead of sa8775p-ride-r3 --- configs/qcs9100_defconfig | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 configs/qcs9100_defconfig
diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig new file mode 100644 index 0000000000..10ff4d2539 --- /dev/null +++ b/configs/qcs9100_defconfig @@ -0,0 +1,18 @@ +# Configuration for building U-Boot to be flashed +# to the uefi partition of QCS9100 based dev boards with +# the "Linux Embedded" partition layout (which have +# a dedicated "uefi" partition for edk2/U-Boot) + +#include "qcom_defconfig" + +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xA8C000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600 + +# Address where U-Boot will be loaded +CONFIG_TEXT_BASE=0xaf000000 +CONFIG_REMAKE_ELF=y + +CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"