[U-Boot-Users] [PATCH 09/15 v2] ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)

This patch adds basic support for the AMCC 460EX/460GT PPC's.

Signed-off-by: Stefan Roese sr@denx.de --- include/ppc440.h | 590 ++++++++++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 502 insertions(+), 88 deletions(-)

diff --git a/include/ppc440.h b/include/ppc440.h index 907744b..cf29fe7 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -380,7 +380,8 @@ #define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */ #endif /* CONFIG_440SPE */

-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) /*----------------------------------------------------------------------------+ | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -416,7 +417,8 @@ /*-----------------------------------------------------------------------------+ | Memory Bank 0-7 configuration +-----------------------------------------------------------------------------*/ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */ #define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2) #define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2) @@ -692,6 +694,7 @@ #define SDRAM_CLKTR_CLKP_0_DEG 0x00000000 #define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000 #define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000 +#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000

/*-----------------------------------------------------------------------------+ | SDRAM Write Timing Register @@ -1577,49 +1580,6 @@

#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */

-/* CUST0 Customer Configuration Register0 */ -#define SDR0_CUST0 0x4000 -#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ -#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */ -#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */ -#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */ - -#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */ -#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */ -#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */ - -#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */ -#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */ -#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */ - -#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */ -#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) -#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) - -#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */ -#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22) -#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03) - -#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */ -#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */ -#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */ - -#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */ -#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */ -#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */ - -#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */ -#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4) -#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF) - -#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */ -#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */ -#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */ - /* CUST1 Customer Configuration Register1 */ #define SDR0_CUST1 0x4002 #define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */ @@ -1666,25 +1626,34 @@ #define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ #define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */

+#endif /* 440EP || 440GR || 440EPX || 440GRX */ + /*----------------------------------------------------------------------------- - | Internal SRAM + | L2 Cache +----------------------------------------------------------------------------*/ -#define ISRAM0_DCR_BASE 0x380 -#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ -#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ -#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ -#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ -#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ -#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ -#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ -#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ +#if defined (CONFIG_440GX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define L2_CACHE_BASE 0x030 +#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ +#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ +#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */ +#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */ +#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */ +#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ +#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ +#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */

-#else +#endif /* CONFIG_440GX */

/*----------------------------------------------------------------------------- | Internal SRAM +----------------------------------------------------------------------------*/ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define ISRAM0_DCR_BASE 0x380 +#else #define ISRAM0_DCR_BASE 0x020 +#endif #define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ #define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/ #define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/ @@ -1697,22 +1666,52 @@ #define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ #define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */

-/*----------------------------------------------------------------------------- - | L2 Cache - +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define L2_CACHE_BASE 0x030 -#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ -#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ -#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */ -#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */ -#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */ -#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ -#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ -#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) +/* CUST0 Customer Configuration Register0 */ +#define SDR0_CUST0 0x4000 +#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ +#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */ +#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */ +#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */

-#endif /* CONFIG_440GX */ -#endif /* !CONFIG_440EP !CONFIG_440GR*/ +#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */ +#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */ +#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */ + +#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */ +#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */ +#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */ + +#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */ +#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) +#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) + +#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */ +#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22) +#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03) + +#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */ + +#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */ +#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */ +#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */ + +#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */ +#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4) +#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF) + +#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */ +#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */ +#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */ +#endif

/*----------------------------------------------------------------------------- | On-Chip Buses @@ -1722,8 +1721,14 @@ /*----------------------------------------------------------------------------- | Clocking, Power Management and Chip Control +----------------------------------------------------------------------------*/ +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define CNTRL_DCR_BASE 0x160 +#else #define CNTRL_DCR_BASE 0x0b0 -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#endif +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */ #define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */ #define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */ @@ -1751,6 +1756,15 @@ /*----------------------------------------------------------------------------- | Universal interrupt controller +----------------------------------------------------------------------------*/ +#define UIC_SR 0x0 /* UIC status */ +#define UIC_ER 0x2 /* UIC enable */ +#define UIC_CR 0x3 /* UIC critical */ +#define UIC_PR 0x4 /* UIC polarity */ +#define UIC_TR 0x5 /* UIC triggering */ +#define UIC_MSR 0x6 /* UIC masked status */ +#define UIC_VR 0x7 /* UIC vector */ +#define UIC_VCR 0x8 /* UIC vector configuration */ + #define UIC0_DCR_BASE 0xc0 #define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */ #define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */ @@ -1771,7 +1785,9 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */

-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define UIC2_DCR_BASE 0xe0 #define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ #define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ @@ -1927,7 +1943,11 @@ /*----------------------------------------------------------------------------- | DMA +----------------------------------------------------------------------------*/ +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define DMA_DCR_BASE 0x200 +#else #define DMA_DCR_BASE 0x100 +#endif #define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ #define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ #define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */ @@ -1991,15 +2011,16 @@ #define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */ #define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ -#if defined(CONFIG_440GX) -#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ -#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ -#endif /* CONFIG_440GX */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ +#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ +#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */ #define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ #define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ +#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ #endif /* CONFIG_440GX */

@@ -2112,6 +2133,41 @@ #define UIC_MAL_TXEOB UIC_MTE #define UIC_MAL_RXEOB UIC_MRE

+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + +#define UIC_RSVD0 0x80000000 /* N/A - unused */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_IIC1 0x10000000 /* IIC */ +#define UIC_PIM 0x08000000 /* PCI inbound message */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_PCIVPD 0x01000000 /* PCI VPD */ +#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */ +#define UIC_EIR0 0x00400000 /* External interrupt 0 */ +#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */ +#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */ +#define UIC_D0 0x00080000 /* DMA channel 0 */ +#define UIC_D1 0x00040000 /* DMA channel 1 */ +#define UIC_D2 0x00020000 /* DMA channel 2 */ +#define UIC_D3 0x00010000 /* DMA channel 3 */ +#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */ +#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */ +#define UIC_EIR1 0x00002000 /* External interrupt 1 */ +#define UIC_TRNGDA 0x00001000 /* TRNG data available */ +#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */ +#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */ +#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */ +#define UIC_I2OID 0x00000100 /* I2O inbound door bell */ +#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */ +#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */ +#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */ +#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */ +#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */ +#define UIC_EIP94 0x00000004 /* Security EIP94 */ +#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ +#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ + #elif !defined(CONFIG_440SPE) #define UIC_U0 0x80000000 /* UART 0 */ #define UIC_U1 0x40000000 /* UART 1 */ @@ -2221,6 +2277,41 @@ #define UIC_ETH1 0x00000002 /* Ethernet 1 */ #define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */

+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + +#define UIC_EIR2 0x80000000 /* External interrupt 2 */ +#define UIC_U0 0x40000000 /* UART 0 */ +#define UIC_SPI 0x20000000 /* SPI */ +#define UIC_TRNGAL 0x10000000 /* TRNG alarm */ +#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_NDFC 0x02000000 /* NDFC */ +#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */ +#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */ +#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */ +#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */ +#define UIC_L2C 0x00100000 /* L2 cache */ +#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ +#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ +#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ +#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ +#define UIC_CT5 0x00004000 /* GPT compare timer 5 */ +#define UIC_CT6 0x00002000 /* GPT compare timer 6 */ +#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */ +#define UIC_EIR3 0x00000800 /* External interrupt 3 */ +#define UIC_EIR4 0x00000400 /* External interrupt 4 */ +#define UIC_DMAE 0x00000200 /* DMA error */ +#define UIC_I2OE 0x00000100 /* I2O error */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */ +#define UIC_EIR5 0x00000020 /* External interrupt 5 */ +#define UIC_EIR6 0x00000010 /* External interrupt 6 */ +#define UIC_U2 0x00000008 /* UART 2 */ +#define UIC_U3 0x00000004 /* UART 3 */ +#define UIC_EIR7 0x00000002 /* External interrupt 7 */ +#define UIC_EIR8 0x00000001 /* External interrupt 8 */ + #elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)

#define UIC_MS 0x80000000 /* MAL SERR */ @@ -2340,6 +2431,41 @@ #define UIC_RSVD30 0x00000002 /* Reserved */ #define UIC_RSVD31 0x00000001 /* Reserved */

+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + +#define UIC_TAH0 0x80000000 /* TAHOE 0 */ +#define UIC_TAH1 0x40000000 /* TAHOE 1 */ +#define UIC_EIR9 0x20000000 /* External interrupt 9 */ +#define UIC_MS 0x10000000 /* MAL SERR */ +#define UIC_MTDE 0x08000000 /* MAL TXDE */ +#define UIC_MRDE 0x04000000 /* MAL RXDE */ +#define UIC_MTE 0x02000000 /* MAL TXEOB */ +#define UIC_MRE 0x01000000 /* MAL RXEOB */ +#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */ +#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */ +#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */ +#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */ +#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */ +#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */ +#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */ +#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */ +#define UIC_ETH0 0x00008000 /* Ethernet 0 */ +#define UIC_ETH1 0x00004000 /* Ethernet 1 */ +#define UIC_ETH2 0x00002000 /* Ethernet 2 */ +#define UIC_ETH3 0x00001000 /* Ethernet 3 */ +#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */ +#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */ +#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */ +#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */ +#define UIC_EIR10 0x00000080 /* External interrupt 10 */ +#define UIC_EIR11 0x00000040 /* External interrupt 11 */ +#define UIC_RSVD2 0x00000020 /* Reserved */ +#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */ +#define UIC_OTG 0x00000008 /* USB2.0 OTG */ +#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */ +#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */ +#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */ + #elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */

#define UIC_EIR5 0x80000000 /* External interrupt 5 */ @@ -2366,18 +2492,38 @@ #define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */ #define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */

-#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ - UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) +#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ + UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) + +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + +#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */ +#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */ +#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \ + UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)

#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)

-#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */ -#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */ -#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */ -#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */ +#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ + UICB0_UIC1CI | UICB0_UIC2NCI)

-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ - UICB0_UIC1CI | UICB0_UIC2NCI) +#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) + +#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI)

#endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ @@ -3018,6 +3164,198 @@ #define SDR0_MFR 0x4300 #endif /* CONFIG_440SPE */

+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +/* Pin Function Control Register 0 (SDR0_PFC0) */ +#define SDR0_PFC0 0x4100 +#define SDR0_PFC0_DBG 0x00008000 /* debug enable */ +#define SDR0_PFC0_G49E 0x00004000 /* GPIO 49 enable */ +#define SDR0_PFC0_G50E 0x00002000 /* GPIO 50 enable */ +#define SDR0_PFC0_G51E 0x00001000 /* GPIO 51 enable */ +#define SDR0_PFC0_G52E 0x00000800 /* GPIO 52 enable */ +#define SDR0_PFC0_G53E 0x00000400 /* GPIO 53 enable */ +#define SDR0_PFC0_G54E 0x00000200 /* GPIO 54 enable */ +#define SDR0_PFC0_G55E 0x00000100 /* GPIO 55 enable */ +#define SDR0_PFC0_G56E 0x00000080 /* GPIO 56 enable */ +#define SDR0_PFC0_G57E 0x00000040 /* GPIO 57 enable */ +#define SDR0_PFC0_G58E 0x00000020 /* GPIO 58 enable */ +#define SDR0_PFC0_G59E 0x00000010 /* GPIO 59 enable */ +#define SDR0_PFC0_G60E 0x00000008 /* GPIO 60 enable */ +#define SDR0_PFC0_G61E 0x00000004 /* GPIO 61 enable */ +#define SDR0_PFC0_G62E 0x00000002 /* GPIO 62 enable */ +#define SDR0_PFC0_G63E 0x00000001 /* GPIO 63 enable */ + +/* Pin Function Control Register 1 (SDR0_PFC1) */ +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ +#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */ +#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */ +#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */ +#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */ +#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */ +#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */ +#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins*/ +#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins*/ +#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */ +#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */ +#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */ + +/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */ +#define SDR0_ETH_PLL 0x4102 +#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /*Ethernet PLL lock indication*/ +#define SDR0_ETH_PLL_REF_CLK_SEL 0x10000000 /* Ethernet reference clock */ +#define SDR0_ETH_PLL_BYPASS 0x08000000 /* bypass mode enable */ +#define SDR0_ETH_PLL_STOPCLK 0x04000000 /* output clock disable */ +#define SDR0_ETH_PLL_TUNE_MASK 0x03FF0000 /* loop stability tuning bits */ +#define SDR0_ETH_PLL_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3ff)<<16) +#define SDR0_ETH_PLL_MULTI_MASK 0x0000FF00 /* frequency multiplication */ +#define SDR0_ETH_PLL_MULTI_ENCODE(n) ((((unsigned long)(n))&0xff)<<8) +#define SDR0_ETH_PLL_RANGEB_MASK 0x000000F0 /* PLLOUTB/C frequency */ +#define SDR0_ETH_PLL_RANGEB_ENCODE(n) ((((unsigned long)(n))&0x0f)<<4) +#define SDR0_ETH_PLL_RANGEA_MASK 0x0000000F /* PLLOUTA frequency */ +#define SDR0_ETH_PLL_RANGEA_ENCODE(n) (((unsigned long)(n))&0x0f) + +/* Ethernet Configuration Register (SDR0_ETH_CFG) */ +#define SDR0_ETH_CFG 0x4103 +#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /* SGMII3 port loopback enable */ +#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /* SGMII2 port loopback enable */ +#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /* SGMII1 port loopback enable */ +#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /* SGMII0 port loopback enable */ +#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /* SGMII Mask */ +#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /* SGMII2 port enable */ +#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /* SGMII1 port enable */ +#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /* SGMII0 port enable */ +#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /* TAHOE1 Bypass selector */ +#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /* TAHOE0 Bypass selector */ +#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /* EMAC 3 PHY clock selector */ +#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /* EMAC 2 PHY clock selector */ +#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /* EMAC 1 PHY clock selector */ +#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /* EMAC 0 PHY clock selector */ +#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /* Swap EMAC2 with EMAC1 */ +#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /* Swap EMAC0 with EMAC3 */ +#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /* MDIO source selector mask */ +#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /* MDIO source - EMAC0 */ +#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /* MDIO source - EMAC1 */ +#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /* MDIO source - EMAC2 */ +#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /* MDIO source - EMAC3 */ +#define SDR0_ETH_CFG_ZMII_MODE_MASK 0x0000000C /* ZMII bridge mode selector mask */ +#define SDR0_ETH_CFG_ZMII_SEL_MII 0x00000000 /* ZMII bridge mode - MII */ +#define SDR0_ETH_CFG_ZMII_SEL_SMII 0x00000004 /* ZMII bridge mode - SMII */ +#define SDR0_ETH_CFG_ZMII_SEL_RMII_10 0x00000008 /* ZMII bridge mode - RMII (10 Mbps) */ +#define SDR0_ETH_CFG_ZMII_SEL_RMII_100 0x0000000C /* ZMII bridge mode - RMII (100 Mbps) */ +#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /* GMC Port 1 bridge selector */ +#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /* GMC Port 0 bridge selector */ + +#define SDR0_ETH_CFG_ZMII_MODE_SHIFT 4 +#define SDR0_ETH_CFG_ZMII_MII_MODE 0x00 +#define SDR0_ETH_CFG_ZMII_SMII_MODE 0x01 +#define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10 +#define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11 + +/* Miscealleneaous Function Reg. (SDR0_MFR) */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx FIFO bits 0:63 */ +#define SDR0_MFR_T0TxFH 0x00400000 /* force parity error TAHOE0 Tx FIFO bits 64:127 */ +#define SDR0_MFR_T1TxFL 0x00200000 /* force parity error TAHOE1 Tx FIFO bits 0:63 */ +#define SDR0_MFR_T1TxFH 0x00100000 /* force parity error TAHOE1 Tx FIFO bits 64:127 */ +#define SDR0_MFR_E0TxFL 0x00008000 /* force parity error EMAC0 Tx FIFO bits 0:63 */ +#define SDR0_MFR_E0TxFH 0x00004000 /* force parity error EMAC0 Tx FIFO bits 64:127 */ +#define SDR0_MFR_E0RxFL 0x00002000 /* force parity error EMAC0 Rx FIFO bits 0:63 */ +#define SDR0_MFR_E0RxFH 0x00001000 /* force parity error EMAC0 Rx FIFO bits 64:127 */ +#define SDR0_MFR_E1TxFL 0x00000800 /* force parity error EMAC1 Tx FIFO bits 0:63 */ +#define SDR0_MFR_E1TxFH 0x00000400 /* force parity error EMAC1 Tx FIFO bits 64:127 */ +#define SDR0_MFR_E1RxFL 0x00000200 /* force parity error EMAC1 Rx FIFO bits 0:63 */ +#define SDR0_MFR_E1RxFH 0x00000100 /* force parity error EMAC1 Rx FIFO bits 64:127 */ +#define SDR0_MFR_E2TxFL 0x00000080 /* force parity error EMAC2 Tx FIFO bits 0:63 */ +#define SDR0_MFR_E2TxFH 0x00000040 /* force parity error EMAC2 Tx FIFO bits 64:127 */ +#define SDR0_MFR_E2RxFL 0x00000020 /* force parity error EMAC2 Rx FIFO bits 0:63 */ +#define SDR0_MFR_E2RxFH 0x00000010 /* force parity error EMAC2 Rx FIFO bits 64:127 */ +#define SDR0_MFR_E3TxFL 0x00000008 /* force parity error EMAC3 Tx FIFO bits 0:63 */ +#define SDR0_MFR_E3TxFH 0x00000004 /* force parity error EMAC3 Tx FIFO bits 64:127 */ +#define SDR0_MFR_E3RxFL 0x00000002 /* force parity error EMAC3 Rx FIFO bits 0:63 */ +#define SDR0_MFR_E3RxFH 0x00000001 /* force parity error EMAC3 Rx FIFO bits 64:127 */ + +/* EMACx TX Status Register (SDR0_EMACxTXST)*/ +#define SDR0_EMAC0TXST 0x4400 +#define SDR0_EMAC1TXST 0x4401 +#define SDR0_EMAC2TXST 0x4402 +#define SDR0_EMAC3TXST 0x4403 + +#define SDR0_EMACxTXST_FUR 0x02000000 /* TX FIFO underrun */ +#define SDR0_EMACxTXST_BC 0x01000000 /* broadcase address */ +#define SDR0_EMACxTXST_MC 0x00800000 /* multicast address */ +#define SDR0_EMACxTXST_UC 0x00400000 /* unicast address */ +#define SDR0_EMACxTXST_FP 0x00200000 /* frame paused by control packet */ +#define SDR0_EMACxTXST_BFCS 0x00100000 /* bad FCS in the transmitted frame */ +#define SDR0_EMACxTXST_CPF 0x00080000 /* TX control pause frame */ +#define SDR0_EMACxTXST_CF 0x00040000 /* TX control frame */ +#define SDR0_EMACxTXST_MSIZ 0x00020000 /* 1024-maxsize bytes transmitted */ +#define SDR0_EMACxTXST_1023 0x00010000 /* 512-1023 bytes transmitted */ +#define SDR0_EMACxTXST_511 0x00008000 /* 256-511 bytes transmitted */ +#define SDR0_EMACxTXST_255 0x00004000 /* 128-255 bytes transmitted */ +#define SDR0_EMACxTXST_127 0x00002000 /* 65-127 bytes transmitted */ +#define SDR0_EMACxTXST_64 0x00001000 /* 64 bytes transmitted */ +#define SDR0_EMACxTXST_SQE 0x00000800 /* SQE indication */ +#define SDR0_EMACxTXST_LOC 0x00000400 /* loss of carrier sense */ +#define SDR0_EMACxTXST_IERR 0x00000080 /* EMAC internal error */ +#define SDR0_EMACxTXST_EDF 0x00000040 /* excessive deferral */ +#define SDR0_EMACxTXST_ECOL 0x00000020 /* excessive collisions */ +#define SDR0_EMACxTXST_LCOL 0x00000010 /* late collision */ +#define SDR0_EMACxTXST_DFFR 0x00000008 /* deferred frame */ +#define SDR0_EMACxTXST_MCOL 0x00000004 /* multiple collision frame */ +#define SDR0_EMACxTXST_SCOL 0x00000002 /* single collision frame */ +#define SDR0_EMACxTXST_TXOK 0x00000001 /* transmit OK */ + +/* EMACx RX Status Register (SDR0_EMACxRXST)*/ +#define SDR0_EMAC0RXST 0x4404 +#define SDR0_EMAC1RXST 0x4405 +#define SDR0_EMAC2RXST 0x4406 +#define SDR0_EMAC3RXST 0x4407 + +#define SDR0_EMACxRXST_FOR 0x20000000 /* RX FIFO overrun */ +#define SDR0_EMACxRXST_BC 0x10000000 /* broadcast address */ +#define SDR0_EMACxRXST_MC 0x08000000 /* multicast address */ +#define SDR0_EMACxRXST_UC 0x04000000 /* unicast address */ +#define SDR0_EMACxRXST_UPR_MASK 0x03800000 /* user priority field */ +#define SDR0_EMACxRXST_UPR_ENCODE(n) ((((unsigned long)(n))&0x07)<<23) +#define SDR0_EMACxRXST_VLAN 0x00400000 /* RX VLAN tagged frame */ +#define SDR0_EMACxRXST_LOOP 0x00200000 /* received in loop-back mode */ +#define SDR0_EMACxRXST_UOP 0x00100000 /* RX unsupported opcode */ +#define SDR0_EMACxRXST_CPF 0x00080000 /* RX control pause frame */ +#define SDR0_EMACxRXST_CF 0x00040000 /* RX control frame*/ +#define SDR0_EMACxRXST_MSIZ 0x00020000 /* 1024-MaxSize bytes recieved*/ +#define SDR0_EMACxRXST_1023 0x00010000 /* 512-1023 bytes received */ +#define SDR0_EMACxRXST_511 0x00008000 /* 128-511 bytes received */ +#define SDR0_EMACxRXST_255 0x00004000 /* 128-255 bytes received */ +#define SDR0_EMACxRXST_127 0x00002000 /* 65-127 bytes received */ +#define SDR0_EMACxRXST_64 0x00001000 /* 64 bytes received */ +#define SDR0_EMACxRXST_RUNT 0x00000800 /* runt frame */ +#define SDR0_EMACxRXST_SEVT 0x00000400 /* short event */ +#define SDR0_EMACxRXST_AERR 0x00000200 /* alignment error */ +#define SDR0_EMACxRXST_SERR 0x00000100 /* received with symbol error */ +#define SDR0_EMACxRXST_BURST 0x00000040 /* received burst */ +#define SDR0_EMACxRXST_F2L 0x00000020 /* frame is to long */ +#define SDR0_EMACxRXST_OERR 0x00000010 /* out of range length error */ +#define SDR0_EMACxRXST_IERR 0x00000008 /* in range length error */ +#define SDR0_EMACxRXST_LOST 0x00000004 /* frame lost due to internal EMAC receive error */ +#define SDR0_EMACxRXST_BFCS 0x00000002 /* bad FCS in the recieved frame */ +#define SDR0_EMACxRXST_RXOK 0x00000001 /* Recieve OK */ + +/* EMACx TX Status Register (SDR0_EMACxREJCNT)*/ +#define SDR0_EMAC0REJCNT 0x4408 +#define SDR0_EMAC1REJCNT 0x4409 +#define SDR0_EMAC2REJCNT 0x440A +#define SDR0_EMAC3REJCNT 0x440B + +#define SDR0_DDR0 0x00E1 +#define SDR0_DDR0_DPLLRST 0x80000000 +#define SDR0_DDR0_DDRM_MASK 0x60000000 +#define SDR0_DDR0_DDRM_DDR1 0x20000000 +#define SDR0_DDR0_DDRM_DDR2 0x40000000 +#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29) +#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03) +#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0) +#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF) +#endif /* CONFIG_460EX || CONFIG_460GT */

#define SDR0_SDCS_SDD (0x80000000 >> 31)

@@ -3232,6 +3570,73 @@ #define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */ #define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */

+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + +#define SDR0_SRST0 0x0200 +#define SDR0_SRST SDR0_SRST0 /* for compatability reasons */ +#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */ +#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */ +#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */ +#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */ +#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */ +#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */ +#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */ +#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */ +#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */ +#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */ +#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */ +#define SDR0_SRST0_PCI 0x00100000 /* PCI */ +#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */ +#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */ +#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/ +#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/ +#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/ +#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/ +#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/ +#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/ +#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/transmitter 2 */ +#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */ +#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */ +#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */ +#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/transmitter 3 */ +#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */ + +#define SDR0_SRST1 0x201 +#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */ +#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */ +#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */ +#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */ +#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */ +#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access controller 0 */ +#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access controller 1 */ +#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access controller 2 */ +#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access controller 3 */ +#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */ +#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */ +#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */ +#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */ +#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */ +#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */ +#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and serdes */ +#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */ +#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */ +#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */ +#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */ +#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */ +#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */ +#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */ +#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */ +#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */ +#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */ +#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */ +#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */ +#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */ +#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */ +#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */ +#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */ + +#define SDR0_PCI0 0x1c0 /* PCI Configuration Register */ + #else

#define SDR0_SRST_BGO 0x80000000 @@ -3270,7 +3675,15 @@ /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440GX) && \ +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */ +#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */ +#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */ +#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */ +#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */ +#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ +#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */ +#elif !defined (CONFIG_440GX) && \ !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) @@ -3624,7 +4037,8 @@ #endif /* CONFIG_440GP */

#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00) #define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)