Re: [U-Boot] [U-Boot, 1/6] rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLE

The fixed regulator for overriding BIOS_DISABLE had been modelling backwards (i.e. the GPIO polarity and the enable-active-low/high property had both been inverted), causing the 'regulator' command to always print/expect 'disabled'/'enabled' backwards.

This fixes the mix-up and models it correctly:

• the GPIO is low-active
• the regulator should be enabled (enable-active-high) during boot-on initialisation

Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com

arch/arm/dts/rk3399-puma.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

Applied to u-boot-rockchip, thanks!