5 Jan
2011
5 Jan
'11
9:12 a.m.
Dear Gigin Jose,
please do not send HTML, send plain text only.
And make sure to restrict your line length to < 70 characters.
In message 850635.7691.qm@web95511.mail.in.yahoo.com you wrote:
After loading on the nand flash, I copied the ramdisk to 0x30800000 ("cp.b 140000 30800000 4b5e1") and checked the image with iminfo 30800000 command on the uboot. I get an error "Bad Magic Number". why is it so ? Once I download the the initramfs.uboot to 0x30000000 using tftp and check the image using iminfo, I get the following message.
You cannot read the NAND using the "cp" command. You must use "nand read" instead.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
You might not be as stupid as you look. This is not hard. Let's think
about this. I mean ... I'll think about this, and you can join in
when you know the words. - Terry Pratchett, _Men at Arms_