From: Ye Li ye.li@nxp.com
Since iMX8 has enabled clock uclass, we can parse the clocks from DTB and enable them in GPMI driver.
Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/mtd/nand/raw/mxs_nand_dt.c | 69 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c index c4dc0bb1dd..43dbe9e66e 100644 --- a/drivers/mtd/nand/raw/mxs_nand_dt.c +++ b/drivers/mtd/nand/raw/mxs_nand_dt.c @@ -2,6 +2,8 @@ * NXP GPMI NAND flash driver (DT initialization) * * Copyright (C) 2018 Toradex + * Copyright 2019 NXP + * * Authors: * Stefan Agner stefan.agner@toradex.com * @@ -14,6 +16,7 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/printk.h> +#include <clk.h>
#include <mxs_nand.h>
@@ -91,6 +94,72 @@ static int mxs_nand_dt_probe(struct udevice *dev)
info->legacy_bch_geometry = dev_read_bool(dev, "fsl,legacy-bch-geometry");
+ if (IS_ENABLED(CONFIG_CLK) && IS_ENABLED(CONFIG_IMX8)) { + /* Assigned clock already set clock */ + struct clk gpmi_clk; + + ret = clk_get_by_name(dev, "gpmi_io", &gpmi_clk); + if (ret < 0) { + debug("Can't get gpmi io clk: %d\n", ret); + return ret; + } + + ret = clk_enable(&gpmi_clk); + if (ret < 0) { + debug("Can't enable gpmi io clk: %d\n", ret); + return ret; + } + + ret = clk_get_by_name(dev, "gpmi_apb", &gpmi_clk); + if (ret < 0) { + debug("Can't get gpmi_apb clk: %d\n", ret); + return ret; + } + + ret = clk_enable(&gpmi_clk); + if (ret < 0) { + debug("Can't enable gpmi_apb clk: %d\n", ret); + return ret; + } + + ret = clk_get_by_name(dev, "gpmi_bch", &gpmi_clk); + if (ret < 0) { + debug("Can't get gpmi_bch clk: %d\n", ret); + return ret; + } + + ret = clk_enable(&gpmi_clk); + if (ret < 0) { + debug("Can't enable gpmi_bch clk: %d\n", ret); + return ret; + } + + ret = clk_get_by_name(dev, "gpmi_apb_bch", &gpmi_clk); + if (ret < 0) { + debug("Can't get gpmi_apb_bch clk: %d\n", ret); + return ret; + } + + ret = clk_enable(&gpmi_clk); + if (ret < 0) { + debug("Can't enable gpmi_apb_bch clk: %d\n", ret); + return ret; + } + + /* this clock is used for apbh_dma, since the apbh dma does not support DM, + * we optionally enable it here + */ + ret = clk_get_by_name(dev, "gpmi_apbh_dma", &gpmi_clk); + if (ret < 0) { + debug("Can't get gpmi_apbh_dma clk: %d\n", ret); + } else { + ret = clk_enable(&gpmi_clk); + if (ret < 0) { + debug("Can't enable gpmi_apbh_dma clk: %d\n", ret); + } + } + } + return mxs_nand_init_ctrl(info); }