This series addresses some shortcomings, enables/introduces device tree support and converts all except video to using the driver model. This is fully tested both running our latest downstream BSP as well as the mainline Linux kernel.
This series is available together with my previous series addressing Apalis and Colibri iMX6 as well as Colibri Vybrid aka VF50/VF61 on our git server [1].
[1] http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next
Gerard Salvatella (1): tdx-cfg-block: add support for new colibri iMX6ull skus
Marcel Ziswiler (9): colibri-imx6ull: fix ethernet phy power on colibri-imx6ull: configuration clean-up colibri-imx6ull: migrate pinctrl and regulators to dtb/dm colibri-imx6ull: migrate mmc to using driver model colibri-imx6ull: migrate usb to using driver model colibri-imx6ull: migrate fec to using driver model ARM: dts: colibri-imx6ull: fix uart-has-rtscts property ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl ARM: dts: colibri-imx6ull: update device tree
Philippe Schenker (1): board: imx6ull: Add disable PMIC_STBY_REQ
Stefan Agner (3): tdx-cfg-block: simplify i.MX 6 module detection colibri-imx6ull: set module variant depending on config block apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide
arch/arm/dts/imx6ull-colibri.dts | 170 ++++++++----- arch/arm/dts/imx6ull-pinfunc.h | 26 +- .../toradex/colibri-imx6ull/colibri-imx6ull.c | 225 +++--------------- board/toradex/common/tdx-cfg-block.c | 70 ++++-- board/toradex/common/tdx-cfg-block.h | 3 + configs/colibri-imx6ull_defconfig | 18 +- include/configs/apalis_imx6.h | 4 +- include/configs/colibri-imx6ull.h | 14 +- include/configs/colibri_imx6.h | 4 +- 9 files changed, 227 insertions(+), 307 deletions(-)