Hi Nikhil,
On Thu, 30 Mar 2023 at 01:01, Nikhil M Jain n-jain1@ti.com wrote:
To enable video driver at SPL, need to compile video-uclass, vidconsole-uclass, backlight-uclass, panel-uclass, simple-panel, add rules to compile them at SPL only. To support splash_display at SPL, need to compile video-bmp, add rule to compile at SPL stage only.
Signed-off-by: Nikhil M Jain n-jain1@ti.com
V4:
- No change
V3:
- Rule to compile backlight, console and panel files
- Not added Reiewed-by tag due to changes
V2:
- No change
drivers/video/Makefile | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index cdb7d9a54d..2374b240c2 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -68,3 +68,12 @@ obj-$(CONFIG_VIDEO_ZYNQMP_DPSUB) += zynqmp_dpsub.o
obj-y += bridge/ obj-y += sunxi/
+ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_BACKLIGHT) += backlight-uclass.o +obj-$(CONFIG_SPL_PANEL) += panel-uclass.o +obj-$(CONFIG_SPL_SIMPLE_PANEL) += simple_panel.o +obj-$(CONFIG_SPL_CONSOLE_NORMAL) += console_normal.o +obj-$(CONFIG_SPL_VIDEO) += video-uclass.o vidconsole-uclass.o +obj-$(CONFIG_SPL_VIDEO) += video_bmp.o
Can you use
obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video_bmp.o
instead?
If I ever get back to the split config thing we'll need that.
+endif
2.34.1
Regards, Simon