Hi Albert,
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) +/* Setting the address at which secondary cores start from.*/ +void smp_set_core_boot_addr(unsigned long addr, int corenr) +{
- struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
- /*
* After setting the secondary cores start address,* just release them to boot.*/- out_be32(&gur->scratchrw[0], addr);
- out_be32(&gur->brrl, 0x2);
+}
This function does not exactly "[set] the address at which secondary cores start from"; it sets *a* secondary core's boot address, and then it *boots* it.
Okay, I will fix it later.
Why does this version of smp_set_core_boot_addr() need to boot the
core
in addition to setting the address, whereas the existing ones in virt_v7, vexpress_common and arndale don't boot the cores?
Yes, they don't doing the release operation.
For Low Power Management requirement, maybe only one core will be used,
and
then
We also make sure that the secondary core must be in low power and deep
sleep
mode(using wfi). So I just release it here, to make sure that the wfi
instruction
will be executed as early as possible.
Right after smp_set_core_boot_addr() is called, kick_all_cpus() isgoing to be called. Wouldn't that boot your CPUs just as well?
Yes, it will.
But before that we must do the holdoff bit set operation as the SoC's
requirement.
The BRR contains control bits for enabling boot for each core. On exiting
HRESET or
PORESET, the RCW BOOT_HO field optionally allows for logical core 0 to be
released
for booting or to remain in boot holdoff. All other cores remain in boot
holdoff until their
corresponding bit is set.
Maybe the comment is not very clear and a bit confusing.
Before I'm lost entirely, do you mean that the comment:
- /*
* After setting the secondary cores start address,* just release them to boot.*/Is actually wrong, and the instructions that follow it do not actually boot the secondary core(s)?
The comment should be: /* * After setting the secondary core's start address, * just release it from holdoff. */
From my tests, for most time the release instructions will boot the secondary
core(s) without smp_kick_all_cpus(). One time has failed.
So I think the release can not make sure that it will boot the secondary core(s).
Thanks,
BRs Xiubo