Hi,
On Sat, Nov 25, 2017 at 1:08 PM, Chen-Yu Tsai wens@csie.org wrote:
Hi,
This series enables the EMAC for some A83T and A64 boards.
Changes since v1:
- Added "bitfield: Include linux/bitops.h for ffs()" to fix build errors
- Use bitfield_replace_by_mask() instead of open coding bitfield ops
- Trimmed used pins in the device tree to only those actually needed
- Enabled Realtek PHY driver
- Added "sunxi: Enable EMAC on the Bananapi M64"
ChenYu
Chen-Yu Tsai (5): bitfield: Include linux/bitops.h for ffs() net: sun8i_emac: Support RX/TX delay chains sunxi: Enable EMAC on the Cubietruck Plus sunxi: Enable EMAC on the Bananapi M3 sunxi: Enable EMAC on the Bananapi M64
Any comments (particularly two the first two patches) on this series? Joe?
ChenYu
arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi | 39 +++++++++++++++++++++ arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi | 40 ++++++++++++++++++++++ .../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38 ++++++++++++++++++++ configs/Cubietruck_plus_defconfig | 2 ++ configs/Sinovoip_BPI_M3_defconfig | 2 ++ drivers/net/sun8i_emac.c | 22 ++++++++++++ include/bitfield.h | 1 + 7 files changed, 144 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
-- 2.15.0