The TLMM_GPIO_ENABLE bit is actually use to disable the GPIO. change it to TLMM_GPIO_DISABLE so it's clearer.
Signed-off-by: Ramon Fried ramon.fried@gmail.com ---
arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-snapdragon/pinctrl-snapdragon.c b/arch/arm/mach-snapdragon/pinctrl-snapdragon.c index ac511d9ee5..9ba8fdd729 100644 --- a/arch/arm/mach-snapdragon/pinctrl-snapdragon.c +++ b/arch/arm/mach-snapdragon/pinctrl-snapdragon.c @@ -22,7 +22,7 @@ struct msm_pinctrl_priv { #define TLMM_GPIO_PULL_MASK GENMASK(1, 0) #define TLMM_FUNC_SEL_MASK GENMASK(5, 2) #define TLMM_DRV_STRENGTH_MASK GENMASK(8, 6) -#define TLMM_GPIO_ENABLE BIT(9) +#define TLMM_GPIO_DISABLE BIT(9)
static const struct pinconf_param msm_conf_params[] = { { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 3 }, @@ -74,7 +74,7 @@ static int msm_pinmux_set(struct udevice *dev, unsigned int pin_selector, struct msm_pinctrl_priv *priv = dev_get_priv(dev);
clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector), - TLMM_FUNC_SEL_MASK | TLMM_GPIO_ENABLE, + TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE, priv->data->get_function_mux(func_selector) << 2); return 0; }