This converts the following to Kconfig: CONFIG_BOOTCOUNT_I2C
Signed-off-by: Alex Kiernan alex.kiernan@gmail.com Reviewed-by: Lukasz Majewski lukma@denx.de ---
Changes in v3: None Changes in v2: None
README | 6 ------ configs/ids8313_defconfig | 1 + drivers/bootcount/Kconfig | 9 +++++++++ include/configs/ids8313.h | 1 - scripts/config_whitelist.txt | 1 - 5 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/README b/README index 474632c..2008483 100644 --- a/README +++ b/README @@ -2309,12 +2309,6 @@ The following options need to be configured: - bootcount support: CONFIG_AT91SAM9XE enable special bootcounter support on at91sam9xe based boards. - CONFIG_BOOTCOUNT_I2C - enable support for the bootcounter on an i2c (like RTC) device. - CONFIG_SYS_I2C_RTC_ADDR = i2c chip address - CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for - the bootcounter. - CONFIG_BOOTCOUNT_ALEN = address len CONFIG_BOOTCOUNT_EXT enable support for the bootcounter in EXT filesystem CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index b754758..ca14815 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -30,6 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)" CONFIG_CMD_UBI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_I2C=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index eabfd13..8c19ae6 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -46,6 +46,15 @@ config BOOTCOUNT_RAM Store the bootcount in DRAM protected against against bit errors due to short power loss or holding a system in RESET.
+config BOOTCOUNT_I2C + bool "Boot counter on I2C device" + help + Enable support for the bootcounter on an i2c (like RTC) device. + CONFIG_SYS_I2C_RTC_ADDR = i2c chip address + CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for + the bootcounter. + CONFIG_BOOTCOUNT_ALEN = address len + endchoice
config SYS_BOOTCOUNT_SINGLEWORD diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 628e0a2..099d7bd 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -515,7 +515,6 @@ #define CONFIG_MTD_PARTITIONS
/* bootcount support */ -#define CONFIG_BOOTCOUNT_I2C #define CONFIG_BOOTCOUNT_ALEN 1 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 07951f2..c47156b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -148,7 +148,6 @@ CONFIG_BOOGER CONFIG_BOOM CONFIG_BOOTBLOCK CONFIG_BOOTCOUNT_ALEN -CONFIG_BOOTCOUNT_I2C CONFIG_BOOTFILE CONFIG_BOOTMAPSZ CONFIG_BOOTMODE