Hi Peter,
On Fri, 3 Jul 2020 at 06:33, Peter Geis pgwipeout@gmail.com wrote:
Good Morning,
I am attempting to expand on the work for chainloading U-Boot on the nyan-big in order to chainload U-Boot on the Ouya Tegra30 device from fastboot. I have so far been unsuccessful at getting any output from U-Boot through this method.
I'm building the cardhu board with tweaks for Ouya's specifications similar to my work for the linux kernel. I build the image using mkbootimg --kernel u-boot.bin --ramdisk /dev/null --output u-boot-android.bin. I then fastboot boot u-boot-android.bin.
I've tried tweaking the text base and tried both standard debug and low level debug.
Do you think you could give me some insight into where I'm going wrong?
Is it possible that fastboot expects a relocatable image? If you set up the debug UART very early you might be able to output a character in start.S ?
BTW does U-Boot have support for the fastboot protocol? Perhaps you could just use U-Boot?
Regards, Simon