In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree.
Signed-off-by: Tony Dinh mibodhi@gmail.com ---
Changes in v2: - Correct copyright
board/zyxel/nsa310s/nsa310s.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c index cd4a7723b1..41479af8e6 100644 --- a/board/zyxel/nsa310s/nsa310s.c +++ b/board/zyxel/nsa310s/nsa310s.c @@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2015 - * Gerald Kerma dreagle@doukki.net - * Tony Dinh mibodhi@gmail.com + * Copyright (C) 2015, 2021 Tony Dinh mibodhi@gmail.com + * Copyright (C) 2015 Gerald Kerma dreagle@doukki.net */
#include <common.h> @@ -81,22 +80,18 @@ int board_init(void) return 0; }
+#define PHY_ADR 1 + #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { u16 reg; - u16 phyaddr; - char *name = "egiga0"; + u16 phyaddr = PHY_ADR; + char *name = "ethernet-controller@72000";
if (miiphy_set_current_dev(name)) return;
- /* read PHY dev address */ - if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) { - printf("could not read PHY dev address\n"); - return; - } - /* set RGMII delay */ miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG); miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®); @@ -131,5 +126,7 @@ void reset_phy(void) /* downshift */ miiphy_write(name, phyaddr, 0x10, 0x3860); miiphy_write(name, phyaddr, 0x0, 0x9140); + + printf("MV88E1318 PHY initialized on %s\n", name); } #endif /* CONFIG_RESET_PHY_R */