There is no need to use these macros because enum pm_api_id can be used instead.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/fpga/zynqmppl.c | 8 ++++---- include/zynqmppl.h | 3 --- 2 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c index 5b103cfeaf18..03878d32ec1c 100644 --- a/drivers/fpga/zynqmppl.c +++ b/drivers/fpga/zynqmppl.c @@ -231,11 +231,11 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize, buf_hi = upper_32_bits(bin_buf);
if (xilfpga_old) - ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo, buf_hi, (u32)(uintptr_t)bsizeptr, bstype, ret_payload); else - ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo, buf_hi, (u32)bsize, 0, ret_payload);
if (ret) @@ -277,7 +277,7 @@ static int zynqmp_loads(xilinx_desc *desc, const void *buf, size_t bsize, buf_lo = lower_32_bits((ulong)buf); buf_hi = upper_32_bits((ulong)buf);
- ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo, buf_hi, (u32)(uintptr_t)fpga_sec_info->userkey_addr, flag, ret_payload); @@ -295,7 +295,7 @@ static int zynqmp_pcap_info(xilinx_desc *desc) int ret; u32 ret_payload[PAYLOAD_ARG_CNT];
- ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_STATUS, 0, 0, 0, + ret = xilinx_pm_request(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload); if (!ret) printf("PCAP status\t0x%x\n", ret_payload[1]); diff --git a/include/zynqmppl.h b/include/zynqmppl.h index a0a52ec4c1d3..35cfe17d4441 100644 --- a/include/zynqmppl.h +++ b/include/zynqmppl.h @@ -10,9 +10,6 @@ #include <xilinx.h> #include <linux/bitops.h>
-#define ZYNQMP_SIP_SVC_CSU_DMA_CHIPID 0xC2000018 -#define ZYNQMP_SIP_SVC_PM_FPGA_LOAD 0xC2000016 -#define ZYNQMP_SIP_SVC_PM_FPGA_STATUS 0xC2000017 #define ZYNQMP_FPGA_OP_INIT (1 << 0) #define ZYNQMP_FPGA_OP_LOAD (1 << 1) #define ZYNQMP_FPGA_OP_DONE (1 << 2)