From: Ian Ray ian.ray@ge.com
Enable display backlight only if a message needs to be displayed. The kernel re-initializes the backlight, which results in some unwanted artifacts.
Signed-off-by: Ian Ray ian.ray@ge.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.co.uk --- board/ge/bx50v3/bx50v3.c | 43 ++++++++++++++++++++++++++----------------- include/configs/ge_bx50v3.h | 1 + 2 files changed, 27 insertions(+), 17 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index c7a29185bf49..35efe159d598 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -786,23 +786,6 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif
-#ifdef CONFIG_VIDEO_IPUV3 - /* We need at least 200ms between power on and backlight on - * as per specifications from CHI MEI */ - mdelay(250); - - /* enable backlight PWM 1 */ - pwm_init(0, 0, 0); - - /* duty cycle 5000000ns, period: 5000000ns */ - pwm_config(0, 5000000, 5000000); - - /* Backlight Power */ - gpio_direction_output(LVDS_BACKLIGHT_GP, 1); - - pwm_enable(0); -#endif - /* board specific pmic init */ pmic_init();
@@ -843,3 +826,29 @@ int checkboard(void) printf("BOARD: %s\n", CONFIG_BOARD_NAME); return 0; } + +static int do_backlight_enable(void) +{ +#ifdef CONFIG_VIDEO_IPUV3 + /* We need at least 200ms between power on and backlight on + * as per specifications from CHI MEI */ + mdelay(250); + + /* enable backlight PWM 1 */ + pwm_init(0, 0, 0); + + /* duty cycle 5000000ns, period: 5000000ns */ + pwm_config(0, 5000000, 5000000); + + /* Backlight Power */ + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); + + pwm_enable(0); +#endif +} + +U_BOOT_CMD( + bx50_backlight_enable, 1, 1, do_backlight_enable, + "enable Bx50 backlight", + "no parameters" +); diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index cbfe30d536d0..925507fe81f1 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -128,6 +128,7 @@ "swappartitions=" \ "setexpr partnum 3 - ${partnum}\0" \ "failbootcmd=" \ + "bx50_backlight_enable; " \ "msg="Monitor failed to start. Try again, or contact GE Service for support."; " \ "echo $msg; " \ "setenv stdout vga; " \