Dear Wolfgang Denk
Sorry I was unclear in my question, its not that saveenv doesn't work as it does, it was that I was hoping to do it through the build system/configuration file.
Bundy
wd wrote:
Dear bundy,
In message 22195894.post@talk.nabble.com you wrote:
uboot is currently configured to autoboot with "run boot_nor". In the configuration I found a variable called BOOTCOMMAND which is set to "run boot_nor". Which I now want to set it to "run prog_all_usb; run boot_nor" I then recompile everything transfer u-boot to my device and on initial startup it works but if I turn my device off and back on it and interrupt autoboot and type "printenv". The bootcmd is set back to just "run boot_nor"
- what am i missing??????????????
If you had bothered to read the manual you should have known that rebuilding U-Boot is not necessary for such a simple change - a simple "setenv" followed by a "saveenv" would have been all you needed.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "It is easier to port a shell than a shell script." - Larry Wall _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot