This converts 3 usages of this option to the non-SPL form, since there is no SPL_MULTIPLEXER defined in Kconfig
Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Tom Rini trini@konsulko.com ---
(no changes since v3)
Changes in v3: - Move the option down to the non-SPL part of drivers/Makefile
drivers/Makefile | 2 +- drivers/mux/Makefile | 2 +- include/mux.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile index 15d19d0c8a3..58be410135d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ obj-$(CONFIG_$(SPL_TPL_)LED) += led/ obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/ obj-y += mtd/ -obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/ obj-$(CONFIG_$(SPL_TPL_)ETH) += net/ obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/ obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ @@ -87,6 +86,7 @@ obj-$(CONFIG_FASTBOOT) += fastboot/ obj-$(CONFIG_FWU_MDATA) += fwu-mdata/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ +obj-$(CONFIG_MULTIPLEXER) += mux/ obj-$(CONFIG_NVME) += nvme/ obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ obj-y += dfu/ diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile index 78ebf04c7a9..d4e24789d33 100644 --- a/drivers/mux/Makefile +++ b/drivers/mux/Makefile @@ -3,5 +3,5 @@ # (C) Copyright 2019 # Jean-Jacques Hiblot jjhiblot@ti.com
-obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux-uclass.o +obj-$(CONFIG_MULTIPLEXER) += mux-uclass.o obj-$(CONFIG_$(SPL_)MUX_MMIO) += mmio.o diff --git a/include/mux.h b/include/mux.h index 9f809912742..c92d887591e 100644 --- a/include/mux.h +++ b/include/mux.h @@ -23,7 +23,7 @@ struct udevice; struct mux_control;
-#if CONFIG_IS_ENABLED(MULTIPLEXER) +#if IS_ENABLED(CONFIG_MULTIPLEXER) /** * mux_control_states() - Query the number of multiplexer states. * @mux: The mux-control to query.