From: Wasim Khan wasim.khan@nxp.com
VID is a common driver. Move platform specific definitions to platform specific header files
Signed-off-by: Wasim Khan wasim.khan@nxp.com --- board/freescale/common/vid.h | 10 ---------- include/configs/lx2160a_common.h | 7 +++++++ 2 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h index b34c080b4b..32e68fceb2 100644 --- a/board/freescale/common/vid.h +++ b/board/freescale/common/vid.h @@ -59,16 +59,6 @@ #define PMBUS_CMD_VOUT_COMMAND 0x21 #define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
-#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \ -defined(CONFIG_TARGET_LX2160ARDB) -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define I2C_VOL_MONITOR_ADDR 0x63 -#define I2C_MUX_CH_VOL_MONITOR 0xA -#endif - int adjust_vdd(ulong vdd_override); u16 soc_get_fuse_vid(int vid_index);
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 1ae7d37dd9..c2c4a8c7a1 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -86,6 +86,13 @@ #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_MUX_CH_VOL_MONITOR 0xA + /* Define phy_reset function to boot the MC based on mcinitcmd. * This happens late enough to properly fixup u-boot env MAC addresses. */