In order to ensure that the VOP registers are in correct state, add missing support for the VOP reset lines found in the device-tree
Signed-off-by: Arnaud Patard arnaud.patard@rtp-net.org Tested-by: Peter Robinson pbrobinson@gmail.com Index: u-boot/drivers/video/rockchip/rk_vop.c =================================================================== --- u-boot.orig/drivers/video/rockchip/rk_vop.c +++ u-boot/drivers/video/rockchip/rk_vop.c @@ -8,9 +8,11 @@ #include <clk.h> #include <display.h> #include <dm.h> +#include <dm/device_compat.h> #include <edid.h> #include <log.h> #include <regmap.h> +#include <reset.h> #include <syscon.h> #include <video.h> #include <asm/global_data.h> @@ -37,14 +39,16 @@ enum vop_pol { DCLK_INVERT = 3 };
-static void rkvop_enable(struct rk3288_vop *regs, ulong fbbase, +static void rkvop_enable(struct udevice *dev, struct rk3288_vop *regs, ulong fbbase, int fb_bits_per_pixel, - const struct display_timing *edid) + const struct display_timing *edid, + struct reset_ctl *dclk_rst) { u32 lb_mode; u32 rgb_mode; u32 hactive = edid->hactive.typ; u32 vactive = edid->vactive.typ; + int ret;
writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1), ®s->win0_act_info); @@ -92,6 +96,18 @@ static void rkvop_enable(struct rk3288_v
writel(fbbase, ®s->win0_yrgb_mst); writel(0x01, ®s->reg_cfg_done); /* enable reg config */ + + ret = reset_assert(dclk_rst); + if (ret) { + dev_warn(dev, "failed to assert dclk reset (ret=%d)\n", ret); + return; + } + udelay(20); + + ret = reset_deassert(dclk_rst); + if (ret) + dev_warn(dev, "failed to deassert dclk reset (ret=%d)\n", ret); + }
static void rkvop_set_pin_polarity(struct udevice *dev, @@ -239,6 +255,7 @@ static int rk_display_init(struct udevic enum video_log2_bpp l2bpp; ofnode remote; const char *compat; + struct reset_ctl dclk_rst;
debug("%s(%s, 0x%lx, %s)\n", __func__, dev_read_name(dev), fbbase, ofnode_get_name(ep_node)); @@ -355,7 +372,14 @@ static int rk_display_init(struct udevic }
rkvop_mode_set(dev, &timing, vop_id); - rkvop_enable(regs, fbbase, 1 << l2bpp, &timing); + + ret = reset_get_by_name(dev, "dclk", &dclk_rst); + if (ret) { + dev_err(dev, "failed to get dclk reset (ret=%d)\n", ret); + return ret; + } + + rkvop_enable(dev, regs, fbbase, 1 << l2bpp, &timing, &dclk_rst);
ret = display_enable(disp, 1 << l2bpp, &timing); if (ret) @@ -392,11 +416,31 @@ int rk_vop_probe(struct udevice *dev) struct rk_vop_priv *priv = dev_get_priv(dev); int ret = 0; ofnode port, node; + struct reset_ctl ahb_rst;
/* Before relocation we don't need to do anything */ if (!(gd->flags & GD_FLG_RELOC)) return 0;
+ ret = reset_get_by_name(dev, "ahb", &ahb_rst); + if (ret) { + dev_err(dev, "failed to get ahb reset (ret=%d)\n", ret); + return ret; + } + + ret = reset_assert(&ahb_rst); + if (ret) { + dev_err(dev, "failed to assert ahb reset (ret=%d)\n", ret); + return ret; + } + udelay(20); + + ret = reset_deassert(&ahb_rst); + if (ret) { + dev_err(dev, "failed to deassert ahb reset (ret=%d)\n", ret); + return ret; + } + #if defined(CONFIG_EFI_LOADER) debug("Adding to EFI map %d @ %lx\n", plat->size, plat->base); efi_add_memory_map(plat->base, plat->size, EFI_RESERVED_MEMORY_TYPE);