From: Rui Miguel Silva rui.silva@linaro.org
Add default configuration to run u-boot as BL33 in the ARM Trusted Firmware boot flow for AArch32 case.
Signed-off-by: Rui Miguel Silva rui.silva@linaro.org Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Simon Glass sjg@chromium.org Cc: Maxime Ripard maxime.ripard@free-electrons.com Cc: Lukasz Majewski lukma@denx.de Cc: Tuomas Tynkkynen tuomas.tynkkynen@iki.fi Cc: u-boot@lists.denx.de --- configs/warp7_bl33_defconfig | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 configs/warp7_bl33_defconfig
diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig new file mode 100644 index 0000000000..bed970b014 --- /dev/null +++ b/configs/warp7_bl33_defconfig @@ -0,0 +1,42 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_SECURE_BOOT=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_TARGET_WARP7=y +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DFU_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_ETHER=y +CONFIG_USB_ETH_CDC=y +CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" +CONFIG_OF_LIBFDT=y +CONFIG_OPTEE_TZDRAM_SIZE=0x2000000