On the Allwinner platform we were describing a quite comprehensive memory map in a per-SoC header unser arch/arm. In the old days that was used by every driver, but nowadays it should only be needed by SPL drivers (not using the DT). Many addresses in there were never used, and some are not needed anymore.
To avoid a dependency on CPU specific headers in an arch specific directory, move the definition of the pinctroller MMIO base address into the sunxi_gpio.h header, because the SPL routines for GPIO should be the only one needing this address. This is a first step towards getting rid of cpu_sun[x]i.h completely, and allows to remove the inclusion of that file from the sunxi_gpio.h header.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 2 -- arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 2 -- arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 2 -- include/sunxi_gpio.h | 12 +++++++++++- 4 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h index f7ecc790dbf..d6fe51f24bc 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -91,7 +91,6 @@
#define SUNXI_CCM_BASE 0x01c20000 #define SUNXI_INTC_BASE 0x01c20400 -#define SUNXI_PIO_BASE 0x01c20800 #define SUNXI_TIMER_BASE 0x01c20c00 #ifndef CONFIG_SUNXI_GEN_SUN6I #define SUNXI_PWM_BASE 0x01c20e00 @@ -210,7 +209,6 @@ defined(CONFIG_MACH_SUN50I)
#define SUNXI_R_TWI_BASE 0x01f02400 #define SUNXI_R_UART_BASE 0x01f02800 -#define SUNXI_R_PIO_BASE 0x01f02c00 #define SUN6I_P2WI_BASE 0x01f03400 #define SUNXI_RSB_BASE 0x01f03400
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h index d9cf8ae0428..9b6bf843601 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h @@ -22,7 +22,6 @@ #define SUNXI_SIDC_BASE 0x03006000 #define SUNXI_SID_BASE 0x03006200 #define SUNXI_TIMER_BASE 0x03009000 -#define SUNXI_PIO_BASE 0x0300B000 #define SUNXI_PSI_BASE 0x0300C000
#define SUNXI_GIC400_BASE 0x03020000 @@ -68,7 +67,6 @@ #define SUNXI_R_CPUCFG_BASE 0x07000400 #define SUNXI_PRCM_BASE 0x07010000 #define SUNXI_R_WDOG_BASE 0x07020400 -#define SUNXI_R_PIO_BASE 0x07022000 #define SUNXI_R_UART_BASE 0x07080000 #define SUNXI_R_TWI_BASE 0x07081400
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h index 9c2d11b5901..20025be2319 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h @@ -81,7 +81,6 @@ /* APB0 Module */ #define SUNXI_CCM_BASE (REGS_APB0_BASE + 0x0000) #define SUNXI_CCMMODULE_BASE (REGS_APB0_BASE + 0x0400) -#define SUNXI_PIO_BASE (REGS_APB0_BASE + 0x0800) #define SUNXI_TIMER_BASE (REGS_APB0_BASE + 0x0C00) #define SUNXI_PWM_BASE (REGS_APB0_BASE + 0x1400) #define SUNXI_LRADC_BASE (REGS_APB0_BASE + 0x1800) @@ -102,7 +101,6 @@ /* RCPUS Module */ #define SUNXI_PRCM_BASE (REGS_RCPUS_BASE + 0x1400) #define SUNXI_R_UART_BASE (REGS_RCPUS_BASE + 0x2800) -#define SUNXI_R_PIO_BASE (REGS_RCPUS_BASE + 0x2c00) #define SUNXI_RSB_BASE (REGS_RCPUS_BASE + 0x3400)
/* Misc. */ diff --git a/include/sunxi_gpio.h b/include/sunxi_gpio.h index e0fb5b5da63..c1fdf7ea1d7 100644 --- a/include/sunxi_gpio.h +++ b/include/sunxi_gpio.h @@ -12,7 +12,17 @@ #define _SUNXI_GPIO_H
#include <linux/types.h> -#include <asm/arch/cpu.h> + +#if defined(CONFIG_MACH_SUN9I) +#define SUNXI_PIO_BASE 0x06000800 +#define SUNXI_R_PIO_BASE 0x08002c00 +#elif defined(CONFIG_SUN50I_GEN_H6) +#define SUNXI_PIO_BASE 0x0300b000 +#define SUNXI_R_PIO_BASE 0x07022000 +#else +#define SUNXI_PIO_BASE 0x01c20800 +#define SUNXI_R_PIO_BASE 0x01f02c00 +#endif
/* * sunxi has 9 banks of gpio, they are: