On Tuesday 11 August 2020 21:33:19 Faiz Abbas wrote:
Pali,
On 11/08/20 1:19 pm, Pali Rohár wrote:
On Tuesday 11 August 2020 08:39:24 Faiz Abbas wrote:
Pali, Peng,
On 10/08/20 6:25 am, Peng Fan wrote:
Faiz, Jean
Subject: [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Got time to take a look?
When this issue was reported in the last thread, Pali said that he was unable to get prints because of the constant reboot loops? Shouldn't it be easy to put while(1) at different points in this execution and see which step causes the reboot loop?
In May in that last thread I wrote details which I was able to gather:
Month ago I was able to detect that problem is somewhere in function mmc_set_ios() from mmc.c file. I put long debug line prior and also after mmc_set_ios() call. And it was printed only prior. Not after. So I think NULL pointer dereference is in mmc_set_ios() function.I could try with that while(1) loop to print detailed log message and read/capture it. But what information for debugging you need? Or what do you want to print which could help you?
You can continue to bisect into omap_hsmmc_set_ios() to see at what point the NULL pointer gets triggered and what the NULL pointer is.
I could try it, but I do not think I would be able to gather more data. I will try to find free time for this debugging on device either at the end of this week or end of next week.
As I wrote in previous thread, main issue which makes it hard to debug is that this error is not triggered in emulator.
Also can you point to your config file?
I'm using standard config file without any modifications. It is: configs/nokia_rx51_defconfig
In case you are interested, I'm compiling u-boot by commands:
export ARCH=arm export CROSS_COMPILE=arm-linux-gnueabi- make nokia_rx51_config make -j12 u-boot.bin