From: Ravi Babu ravibabu@ti.com
Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers. This is required because, flash drivers may use DMA for read operations and may have to invalidate the buffer before read.
Signed-off-by: Ravi Babu ravibabu@ti.com Signed-off-by: Vignesh R vigneshr@ti.com --- common/env_sf.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/common/env_sf.c b/common/env_sf.c index e928f5752cc7..940983124fbb 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -79,7 +79,7 @@ int saveenv(void) if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; saved_offset = env_new_offset + CONFIG_ENV_SIZE; - saved_buffer = malloc(saved_size); + saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size); if (!saved_buffer) { ret = 1; goto done; @@ -142,9 +142,10 @@ void env_relocate_spec(void) env_t *tmp_env2 = NULL; env_t *ep = NULL;
- tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE); - tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE); - + tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN, + CONFIG_ENV_SIZE); + tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN, + CONFIG_ENV_SIZE); if (!tmp_env1 || !tmp_env2) { set_default_env("!malloc() failed"); goto out; @@ -295,7 +296,7 @@ void env_relocate_spec(void) int ret; char *buf = NULL;
- buf = (char *)malloc(CONFIG_ENV_SIZE); + buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE); env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); if (!env_flash) {