The kmtegr1, kmvect1, and suvd3 boards all use the same config include file with lots of #ifdefs in it.
The Kconfig migation will become easier if we get rid of these #ifdefs first.
Hence, create distinct config include files for these boards. These configs will be copies of the suvd3 for now; we will simplify them in another patch.
Signed-off-by: Mario Six mario.six@gdsys.cc --- arch/powerpc/cpu/mpc83xx/Kconfig | 16 +++- board/keymile/km83xx/Kconfig | 26 ++++++ configs/kmtegr1_defconfig | 2 +- configs/kmvect1_defconfig | 2 +- include/configs/kmtegr1.h | 190 +++++++++++++++++++++++++++++++++++++++ include/configs/kmvect1.h | 190 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 421 insertions(+), 5 deletions(-) create mode 100644 include/configs/kmtegr1.h create mode 100644 include/configs/kmvect1.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index e41f4d1f9a..59e0c9a8d0 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -89,9 +89,19 @@ config TARGET_KM8360
config TARGET_SUVD3 bool "Support suvd3" - select ARCH_MPC8309 if SYS_EXTRA_OPTIONS="KMTEGR1" - select ARCH_MPC8309 if SYS_EXTRA_OPTIONS="KMVECT1" - select ARCH_MPC832X if SYS_EXTRA_OPTIONS="SUVD3" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMVECT1 + bool "Support kmvect1" + select ARCH_MPC8309 + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMTEGR1 + bool "Support kmtegr1" + select ARCH_MPC8309 imply CMD_CRAMFS imply FS_CRAMFS
diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index d6c594c96a..d52ee9117b 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -11,6 +11,32 @@ config SYS_CONFIG_NAME
endif
+if TARGET_KMVECT1 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmvect1" + +endif + +if TARGET_KMTEGR1 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmtegr1" + +endif + if TARGET_SUVD3
config SYS_BOARD diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index a3325a7662..528380a110 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 CONFIG_MPC83xx=y -CONFIG_TARGET_SUVD3=y +CONFIG_TARGET_KMTEGR1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1" diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index 927ef9d56e..94bd6ce055 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 CONFIG_MPC83xx=y -CONFIG_TARGET_SUVD3=y +CONFIG_TARGET_KMVECT1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="KMVECT1" diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h new file mode 100644 index 0000000000..3e88c9000c --- /dev/null +++ b/include/configs/kmtegr1.h @@ -0,0 +1,190 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu daveliu@freescale.com + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada peterb@logicpd.com + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov avorontsov@ru.mvista.com + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +/* This needs to be set prior to including km/km83xx-common.h */ + +#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ +#define CONFIG_HOSTNAME "suvd3" +#define CONFIG_KM_BOARD_NAME "suvd3" +/* include common defines/options for all 8321 Keymile boards */ +#include "km/km8321-common.h" + +#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ +#define CONFIG_HOSTNAME "kmvect1" +#define CONFIG_KM_BOARD_NAME "kmvect1" +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" + +#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ +#define CONFIG_HOSTNAME "kmtegr1" +#define CONFIG_KM_BOARD_NAME "kmtegr1" +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +#define CONFIG_ENV_ADDR 0xF0100000 +#define CONFIG_ENV_OFFSET 0x100000 + +#define CONFIG_NAND_ECC_BCH +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 + +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" +/* must be after the include because KMBEC_FPGA is otherwise undefined */ +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ + +#else +#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 +#endif + +#define CONFIG_SYS_APP1_BASE 0xA0000000 +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_BASE 0xB0000000 +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local UPMA 16 bit 256MB APP1 + * 3 Local GPCM 16 bit 256MB APP2 + * + */ + +#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) +/* + * APP1 on the local bus CS2 + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_16 | \ + BR_MS_UPMA | \ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) + +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_3 | \ + OR_GPCM_TRLX_SET) + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) + +#elif defined(CONFIG_KMTEGR1) +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_SCY_5 | \ + OR_GPCM_TRLX_CLEAR | \ + OR_GPCM_EHTR_CLEAR) + +#endif /* CONFIG_KMTEGR1 */ + +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +/* + * MMU Setup + */ +#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) +/* APP1: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +#elif defined(CONFIG_KMTEGR1) +#define CONFIG_SYS_IBAT5L (0) +#define CONFIG_SYS_IBAT5U (0) +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U +#endif /* CONFIG_KMTEGR1 */ + +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +/* + * QE UEC ethernet configuration + */ +#if defined(CONFIG_KMVECT1) +#define CONFIG_MV88E6352_SWITCH +#define CONFIG_KM_MVEXTSW_ADDR 0x10 + +/* ethernet port connected to simple switch 88e6122 (UEC0) */ +#define CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 + +#define CONFIG_FIXED_PHY 0xFFFFFFFF +#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ +#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ + {devnum, speed, duplex} +#define CONFIG_SYS_FIXED_PHY_PORTS \ + CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) + +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 */ + +#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) +/* ethernet port connected to piggy (UEC2) */ +#define CONFIG_HAS_ETH1 +#define CONFIG_UEC_ETH2 +#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0 +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h new file mode 100644 index 0000000000..3e88c9000c --- /dev/null +++ b/include/configs/kmvect1.h @@ -0,0 +1,190 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu daveliu@freescale.com + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada peterb@logicpd.com + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov avorontsov@ru.mvista.com + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +/* This needs to be set prior to including km/km83xx-common.h */ + +#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ +#define CONFIG_HOSTNAME "suvd3" +#define CONFIG_KM_BOARD_NAME "suvd3" +/* include common defines/options for all 8321 Keymile boards */ +#include "km/km8321-common.h" + +#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ +#define CONFIG_HOSTNAME "kmvect1" +#define CONFIG_KM_BOARD_NAME "kmvect1" +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" + +#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ +#define CONFIG_HOSTNAME "kmtegr1" +#define CONFIG_KM_BOARD_NAME "kmtegr1" +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +#define CONFIG_ENV_ADDR 0xF0100000 +#define CONFIG_ENV_OFFSET 0x100000 + +#define CONFIG_NAND_ECC_BCH +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 + +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" +/* must be after the include because KMBEC_FPGA is otherwise undefined */ +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ + +#else +#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 +#endif + +#define CONFIG_SYS_APP1_BASE 0xA0000000 +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_BASE 0xB0000000 +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local UPMA 16 bit 256MB APP1 + * 3 Local GPCM 16 bit 256MB APP2 + * + */ + +#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) +/* + * APP1 on the local bus CS2 + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_16 | \ + BR_MS_UPMA | \ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) + +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_3 | \ + OR_GPCM_TRLX_SET) + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) + +#elif defined(CONFIG_KMTEGR1) +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_SCY_5 | \ + OR_GPCM_TRLX_CLEAR | \ + OR_GPCM_EHTR_CLEAR) + +#endif /* CONFIG_KMTEGR1 */ + +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +/* + * MMU Setup + */ +#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) +/* APP1: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +#elif defined(CONFIG_KMTEGR1) +#define CONFIG_SYS_IBAT5L (0) +#define CONFIG_SYS_IBAT5U (0) +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U +#endif /* CONFIG_KMTEGR1 */ + +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +/* + * QE UEC ethernet configuration + */ +#if defined(CONFIG_KMVECT1) +#define CONFIG_MV88E6352_SWITCH +#define CONFIG_KM_MVEXTSW_ADDR 0x10 + +/* ethernet port connected to simple switch 88e6122 (UEC0) */ +#define CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 + +#define CONFIG_FIXED_PHY 0xFFFFFFFF +#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ +#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ + {devnum, speed, duplex} +#define CONFIG_SYS_FIXED_PHY_PORTS \ + CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) + +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 */ + +#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) +/* ethernet port connected to piggy (UEC2) */ +#define CONFIG_HAS_ETH1 +#define CONFIG_UEC_ETH2 +#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0 +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */ + +#endif /* __CONFIG_H */