[U-Boot] [PATCH 1/4] ARM: dts: stm32: Synchronize DT with kernel one

This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/

This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

- Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added.

Signed-off-by: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Patrice Chotard patrice.chotard@st.com ---

arch/arm/dts/Makefile | 2 + arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi | 120 ++++++++++ arch/arm/dts/stm32mp157-pinctrl.dtsi | 74 ++++++ arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 175 +++++++++++++++ arch/arm/dts/stm32mp157a-dk1.dts | 262 ++++++++++++++++++++++ arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi | 6 + arch/arm/dts/stm32mp157c-dk2.dts | 67 ++++++ arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 36 ++- arch/arm/dts/stm32mp157c-ed1.dts | 47 ++-- arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 19 +- arch/arm/dts/stm32mp157c-ev1.dts | 100 +++++++++ arch/arm/dts/stm32mp157c.dtsi | 272 ++++++++++++++++++++--- 12 files changed, 1106 insertions(+), 74 deletions(-) create mode 100644 arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi create mode 100644 arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157a-dk1.dts create mode 100644 arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-dk2.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 876c032d1179..89d587ae5d75 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -575,6 +575,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb

dtb-$(CONFIG_TARGET_STM32MP1) += \ + stm32mp157a-dk1.dtb \ + stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb

diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi new file mode 100644 index 000000000000..7d9b95ccf166 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + * + * STM32MP157C DK1/DK2 BOARD configuration + * 1x DDR3L 4Gb, 16-bit, 533MHz. + * Reference used NT5CC256M16DP-DI from NANYA + * + * DDR type / Platform DDR3/3L + * freq 533MHz + * width 16 + * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G + * DDR density 4 + * timing mode optimized + * Scheduling/QoS options : type = 2 + * address mapping : RBC + * Tc > + 85C : N + */ +#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.43" +#define DDR_MEM_SPEED 533 +#define DDR_MEM_SIZE 0x20000000 + +#define DDR_MSTR 0x00041401 +#define DDR_MRCTRL0 0x00000010 +#define DDR_MRCTRL1 0x00000000 +#define DDR_DERATEEN 0x00000000 +#define DDR_DERATEINT 0x00800000 +#define DDR_PWRCTL 0x00000000 +#define DDR_PWRTMG 0x00400010 +#define DDR_HWLPCTL 0x00000000 +#define DDR_RFSHCTL0 0x00210000 +#define DDR_RFSHCTL3 0x00000000 +#define DDR_RFSHTMG 0x0081008B +#define DDR_CRCPARCTL0 0x00000000 +#define DDR_DRAMTMG0 0x121B2414 +#define DDR_DRAMTMG1 0x000A041C +#define DDR_DRAMTMG2 0x0608090F +#define DDR_DRAMTMG3 0x0050400C +#define DDR_DRAMTMG4 0x08040608 +#define DDR_DRAMTMG5 0x06060403 +#define DDR_DRAMTMG6 0x02020002 +#define DDR_DRAMTMG7 0x00000202 +#define DDR_DRAMTMG8 0x00001005 +#define DDR_DRAMTMG14 0x000000A0 +#define DDR_ZQCTL0 0xC2000040 +#define DDR_DFITMG0 0x02060105 +#define DDR_DFITMG1 0x00000202 +#define DDR_DFILPCFG0 0x07000000 +#define DDR_DFIUPD0 0xC0400003 +#define DDR_DFIUPD1 0x00000000 +#define DDR_DFIUPD2 0x00000000 +#define DDR_DFIPHYMSTR 0x00000000 +#define DDR_ADDRMAP1 0x00070707 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x1F000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x06060606 +#define DDR_ADDRMAP6 0x0F060606 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 +#define DDR_ODTCFG 0x06000600 +#define DDR_ODTMAP 0x00000001 +#define DDR_SCHED 0x00000C01 +#define DDR_SCHED1 0x00000000 +#define DDR_PERFHPR1 0x01000001 +#define DDR_PERFLPR1 0x08000200 +#define DDR_PERFWR1 0x08000400 +#define DDR_DBG0 0x00000000 +#define DDR_DBG1 0x00000000 +#define DDR_DBGCMD 0x00000000 +#define DDR_POISONCFG 0x00000000 +#define DDR_PCCFG 0x00000010 +#define DDR_PCFGR_0 0x00010000 +#define DDR_PCFGW_0 0x00000000 +#define DDR_PCFGQOS0_0 0x02100C03 +#define DDR_PCFGQOS1_0 0x00800100 +#define DDR_PCFGWQOS0_0 0x01100C03 +#define DDR_PCFGWQOS1_0 0x01000200 +#define DDR_PCFGR_1 0x00010000 +#define DDR_PCFGW_1 0x00000000 +#define DDR_PCFGQOS0_1 0x02100C03 +#define DDR_PCFGQOS1_1 0x00800040 +#define DDR_PCFGWQOS0_1 0x01100C03 +#define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_PGCR 0x01442E02 +#define DDR_PTR0 0x0022AA5B +#define DDR_PTR1 0x04841104 +#define DDR_PTR2 0x042DA068 +#define DDR_ACIOCR 0x10400812 +#define DDR_DXCCR 0x00000C40 +#define DDR_DSGCR 0xF200001F +#define DDR_DCR 0x0000000B +#define DDR_DTPR0 0x38D488D0 +#define DDR_DTPR1 0x098B00D8 +#define DDR_DTPR2 0x10023600 +#define DDR_MR0 0x00000840 +#define DDR_MR1 0x00000000 +#define DDR_MR2 0x00000208 +#define DDR_MR3 0x00000000 +#define DDR_ODTCR 0x00010000 +#define DDR_ZQ0CR1 0x00000038 +#define DDR_DX0GCR 0x0000CE81 +#define DDR_DX0DLLCR 0x40000000 +#define DDR_DX0DQTR 0xFFFFFFFF +#define DDR_DX0DQSTR 0x3DB02000 +#define DDR_DX1GCR 0x0000CE81 +#define DDR_DX1DLLCR 0x40000000 +#define DDR_DX1DQTR 0xFFFFFFFF +#define DDR_DX1DQSTR 0x3DB02000 +#define DDR_DX2GCR 0x0000CE81 +#define DDR_DX2DLLCR 0x40000000 +#define DDR_DX2DQTR 0xFFFFFFFF +#define DDR_DX2DQSTR 0x3DB02000 +#define DDR_DX3GCR 0x0000CE81 +#define DDR_DX3DLLCR 0x40000000 +#define DDR_DX3DQTR 0xFFFFFFFF +#define DDR_DX3DQSTR 0x3DB02000 + +#include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 85da5926551c..4d2bf33be7d4 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,52 @@ }; };

+ ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -187,6 +233,19 @@ }; };

+ m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -360,6 +419,21 @@ slew-rate = <0>; }; }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi new file mode 100644 index 000000000000..f6cf35648abf --- /dev/null +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2018 + */ + +#include <dt-bindings/clock/stm32mp1-clksrc.h> +#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" + +/ { + aliases { + i2c3 = &i2c4; + mmc0 = &sdmmc1; + }; + config { + u-boot,boot-led = "heartbeat"; + u-boot,error-led = "error"; + st,adc_usb_pd = <&adc1 18>, <&adc1 19>; + }; + led { + red { + label = "error"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + status = "okay"; + }; + + blue { + default-state = "on"; + }; + }; +}; + +&clk_hse { + st,digbypass; +}; + +&i2c4 { + u-boot,dm-pre-reloc; +}; + +&i2c4_pins_a { + u-boot,dm-pre-reloc; + pins { + u-boot,dm-pre-reloc; + }; +}; + +&pmic { + u-boot,dm-pre-reloc; +}; + +&rcc { + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MCU_PLL3P + CLK_PLL12_HSE + CLK_PLL3_HSE + CLK_PLL4_HSE + CLK_RTC_LSE + CLK_MCO1_DISABLED + CLK_MCO2_DISABLED + >; + + st,clkdiv = < + 1 /*MPU*/ + 0 /*AXI*/ + 0 /*MCU*/ + 1 /*APB1*/ + 1 /*APB2*/ + 1 /*APB3*/ + 1 /*APB4*/ + 2 /*APB5*/ + 23 /*RTC*/ + 0 /*MCO1*/ + 0 /*MCO2*/ + >; + + st,pkcs = < + CLK_CKPER_HSE + CLK_FMC_ACLK + CLK_QSPI_ACLK + CLK_ETH_DISABLED + CLK_SDMMC12_PLL4P + CLK_DSI_DSIPLL + CLK_STGEN_HSE + CLK_USBPHY_HSE + CLK_SPI2S1_PLL3Q + CLK_SPI2S23_PLL3Q + CLK_SPI45_HSI + CLK_SPI6_HSI + CLK_I2C46_HSI + CLK_SDMMC3_PLL4P + CLK_USBO_USBPHY + CLK_ADC_CKPER + CLK_CEC_LSE + CLK_I2C12_HSI + CLK_I2C35_HSI + CLK_UART1_HSI + CLK_UART24_HSI + CLK_UART35_HSI + CLK_UART6_HSI + CLK_UART78_HSI + CLK_SPDIF_PLL4P + CLK_FDCAN_PLL4Q + CLK_SAI1_PLL3Q + CLK_SAI2_PLL3Q + CLK_SAI3_PLL3Q + CLK_SAI4_PLL3Q + CLK_RNG1_LSI + CLK_RNG2_LSI + CLK_LPTIM1_PCLK1 + CLK_LPTIM23_PCLK3 + CLK_LPTIM45_LSE + >; + + /* VCO = 1300.0 MHz => P = 650 (CPU) */ + pll1: st,pll@0 { + cfg = < 2 80 0 0 0 PQR(1,0,0) >; + frac = < 0x800 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ + pll2: st,pll@1 { + cfg = < 2 65 1 0 0 PQR(1,1,1) >; + frac = < 0x1400 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ + pll3: st,pll@2 { + cfg = < 1 33 1 16 36 PQR(1,1,1) >; + frac = < 0x1a04 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ + pll4: st,pll@3 { + cfg = < 3 98 5 7 7 PQR(1,1,1) >; + u-boot,dm-pre-reloc; + }; +}; + +&sdmmc1 { + u-boot,dm-spl; +}; + +&sdmmc1_b4_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins { + u-boot,dm-pre-reloc; + }; +}; + +&usbotg_hs { + usb1600; + hnp-srp-disable; +}; + +&v3v3 { + regulator-always-on; +}; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts new file mode 100644 index 000000000000..0882765d0c9a --- /dev/null +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; + compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; + + aliases { + ethernet0 = &ethernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + reg = <0xc0000000 0x20000000>; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&ethernet0 { + status = "okay"; + pinctrl-0 = <&ethernet0_rgmii_pins_a>; + pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + st,main-control-register = <0x04>; + st,vin-control-register = <0xc0>; + st,usb-control-register = <0x20>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr { + pwr-supply = <&vdd>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbphyc { + vdd3v3-supply = <&vdd_usb>; + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi new file mode 100644 index 000000000000..06ef3a4095f1 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2018 + */ + +#include "stm32mp157a-dk1-u-boot.dtsi" diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts new file mode 100644 index 000000000000..9a81d2d4728b --- /dev/null +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + phy-dsi-supply = <&reg18>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ltdc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&ltdc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 4898483e1d16..969436089834 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -9,9 +9,9 @@

/ { aliases { + i2c3 = &i2c4; mmc0 = &sdmmc1; mmc1 = &sdmmc2; - i2c3 = &i2c4; };

led { @@ -39,14 +39,8 @@ }; };

-&uart4_pins_a { +&i2c4 { u-boot,dm-pre-reloc; - pins1 { - u-boot,dm-pre-reloc; - }; - pins2 { - u-boot,dm-pre-reloc; - }; };

&i2c4_pins_a { @@ -56,19 +50,10 @@ }; };

-&uart4 { - u-boot,dm-pre-reloc; -}; - -&i2c4 { - u-boot,dm-pre-reloc; -}; - &pmic { u-boot,dm-pre-reloc; };

-/* CLOCK init */ &rcc { st,clksrc = < CLK_MPU_PLL1P @@ -162,8 +147,6 @@ }; };

-/* SPL part **************************************/ -/* MMC1 boot */ &sdmmc1_b4_pins_a { u-boot,dm-spl; pins { @@ -182,7 +165,6 @@ u-boot,dm-spl; };

-/* MMC2 boot */ &sdmmc2_b4_pins_a { u-boot,dm-spl; pins { @@ -200,3 +182,17 @@ &sdmmc2 { u-boot,dm-spl; }; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins1 { + u-boot,dm-pre-reloc; + }; + pins2 { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 1d0306e2f4fd..2664c9ce904d 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -15,13 +15,17 @@ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";

chosen { - stdout-path = "serial3:115200n8"; + stdout-path = "serial0:115200n8"; };

memory@c0000000 { reg = <0xC0000000 0x40000000>; };

+ aliases { + serial0 = &uart4; + }; + sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; @@ -36,15 +40,8 @@ }; };

-&rng1 { - status = "okay"; -}; - -&timers6 { +&hwspinlock { status = "okay"; - timer@5 { - status = "okay"; - }; };

&i2c4 { @@ -321,10 +318,27 @@ }; };

+&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pinctrl { + hwlocks = <&hwspinlock 0>; +}; + &pwr { pwr-supply = <&vdd>; };

+&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + &sdmmc1 { pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; broken-cd; @@ -355,6 +369,13 @@ status = "okay"; };

+&timers6 { + status = "okay"; + timer@5 { + status = "okay"; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; @@ -365,14 +386,6 @@ usb33d-supply = <&usb33>; };

-&hwspinlock { - status = "okay"; -}; - -&pinctrl { - hwlocks = <&hwspinlock 0>; -}; - &usbphyc_port0 { phy-supply = <&vdd_usb>; vdda1v1-supply = <&reg11>; diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi index 30b173478c6c..be3b1526288f 100644 --- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi @@ -7,29 +7,21 @@

/ { aliases { - spi0 = &qspi; i2c1 = &i2c2; i2c4 = &i2c5; + spi0 = &qspi; }; };

&flash0 { compatible = "spi-flash"; + u-boot,dm-spl; };

&flash1 { compatible = "spi-flash"; };

-&v3v3 { - regulator-always-on; -}; - -&usbotg_hs { - g-tx-fifo-size = <576>; -}; - -/* SPL part **************************************/ &qspi { u-boot,dm-spl; }; @@ -61,7 +53,10 @@ }; };

-&flash0 { - u-boot,dm-spl; +&usbotg_hs { + g-tx-fifo-size = <576>; };

+&v3v3 { + regulator-always-on; +}; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 902a42bee290..e114c9b628b8 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -11,6 +11,21 @@ model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";

+ chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = &ethernet0; + }; + + panel_backlight: panel-backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; + default-on; + status = "okay"; + }; };

&cec { @@ -19,6 +34,64 @@ status = "okay"; };

+&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ltdc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; + backlight = <&panel_backlight>; + status = "okay"; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&ethernet0 { + status = "okay"; + pinctrl-0 = <&ethernet0_rgmii_pins_a>; + pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -35,6 +108,26 @@ status = "okay"; };

+&ltdc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_pins_a>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; @@ -60,6 +153,12 @@ }; };

+&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "disabled"; +}; + &timers2 { status = "disabled"; pwm { @@ -106,6 +205,7 @@ &usbotg_hs { pinctrl-names = "default"; pinctrl-0 = <&usbotg_hs_pins_a>; + dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi index 1a5f04736c80..1e45ef6b73ce 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -106,26 +106,6 @@ }; };

- pm_domain { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32mp157c-pd"; - - pd_core_ret: core-ret-power-domain@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - #power-domain-cells = <0>; - label = "CORE-RETENTION"; - - pd_core: core-power-domain@2 { - reg = <2>; - #power-domain-cells = <0>; - label = "CORE"; - }; - }; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -339,6 +319,34 @@ }; };

+ spi2: spi@4000b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + dmas = <&dmamux1 39 0x400 0x05>, + <&dmamux1 40 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + dmas = <&dmamux1 61 0x400 0x05>, + <&dmamux1 62 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -522,6 +530,34 @@ status = "disabled"; };

+ spi1: spi@44004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi4: spi@44005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44005000 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + dmas = <&dmamux1 83 0x400 0x05>, + <&dmamux1 84 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers15: timer@44006000 { #address-cells = <1>; #size-cells = <0>; @@ -584,6 +620,116 @@ }; };

+ spi5: spi@44009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44009000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + dmas = <&dmamux1 85 0x400 0x05>, + <&dmamux1 86 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm2: filter@2 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 103 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm3: filter@3 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <3>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 104 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm4: filter@4 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 91 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm5: filter@5 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <5>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 92 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -647,6 +793,8 @@ reg = <0x0>; interrupt-parent = <&adc>; interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x01>; + dma-names = "rx"; status = "disabled"; };

@@ -656,6 +804,8 @@ reg = <0x100>; interrupt-parent = <&adc>; interrupts = <1>; + dmas = <&dmamux1 10 0x400 0x01>; + dma-names = "rx"; status = "disabled"; }; }; @@ -675,7 +825,7 @@ };

usbotg_hs: usb-otg@49000000 { - compatible = "st,stm32mp1-hsotg", "snps,dwc2"; + compatible = "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -686,7 +836,6 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; - power-domains = <&pd_core>; status = "disabled"; };

@@ -753,8 +902,8 @@ reg = <0x5000d000 0x400>; };

- syscfg: system-config@50020000 { - compatible = "st,stm32-syscfg", "syscon"; + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; };

@@ -853,6 +1002,18 @@ status = "disabled"; };

+ hash1: hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + status = "disabled"; + }; + rng1: rng@54003000 { compatible = "st,stm32-rng"; reg = <0x54003000 0x400>; @@ -871,7 +1032,7 @@ dma-requests = <48>; };

- qspi: qspi@58003000 { + qspi: spi@58003000 { compatible = "st,stm32f469-qspi"; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; @@ -915,6 +1076,36 @@ status = "disabled"; };

+ stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "syscfg-clk"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc SYSCFG>; + st,syscon = <&syscfg 0x4>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + status = "disabled"; + }; + usbh_ohci: usbh-ohci@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; @@ -955,6 +1146,14 @@ status = "disabled"; };

+ iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&rcc IWDG2>, <&rcc CK_LSI>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; @@ -983,6 +1182,20 @@ status = "disabled"; };

+ spi6: spi@5c001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x5c001000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI6_K>; + resets = <&rcc SPI6_R>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>, + <&mdma1 35 0x0 0x40002 0x0 0x0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c4: i2c@5c002000 { compatible = "st,stm32f7-i2c"; reg = <0x5c002000 0x400>; @@ -996,6 +1209,15 @@ status = "disabled"; };

+ rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>;