[U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5

13 Aug 2012

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com
Cc: Scott Wood scottwood@freescale.com
Cc: Stefano Babic sbabic@denx.de
---
 .../arch/arm/include/asm/arch-mx5/imx-regs.h       |    9 +
 .../drivers/mtd/nand/mxc_nand.c                    |  217 +++++++++++++++-----
 .../include/fsl_nfc.h                              |  149 +++++++++-----
 .../nand_spl/nand_boot_fsl_nfc.c                   |  114 +++++++---
 4 files changed, 363 insertions(+), 126 deletions(-)

diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/imx-regs.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/imx-regs.h
index 7f66b61..55e9660 100644
--- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -232,6 +232,15 @@
 #define CS0_32M_CS1_32M_CS2_32M_CS3_32M		3
/*
+ * SRC register definitions
+ */
+#if defined(CONFIG_MX51)
+#define SRC_SBMR_NF16B		(1 << 2)
+#elif defined(CONFIG_MX53)
+#define SRC_SBMR_NF16B		(1 << 13)
+#endif
+
+/*
  * CSPI register definitions
  */
 #define MXC_ECSPI
diff --git u-boot-4d3c95f.orig/drivers/mtd/nand/mxc_nand.c u-boot-4d3c95f/drivers/mtd/nand/mxc_nand.c
index cf2a7b0..b2fa2e7 100644
--- u-boot-4d3c95f.orig/drivers/mtd/nand/mxc_nand.c
+++ u-boot-4d3c95f/drivers/mtd/nand/mxc_nand.c
@@ -22,7 +22,8 @@
 #include <nand.h>
 #include <linux/err.h>
 #include <asm/io.h>
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \
+	defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
 #include <fsl_nfc.h>
@@ -36,6 +37,9 @@ struct mxc_nand_host {
    struct nand_chip		*nand;
struct fsl_nfc_regs __iomem	*regs;
+#ifdef MXC_NFC_V3_2
+	struct fsl_nfc_ip_regs __iomem	*ip_regs;
+#endif
    int				spare_only;
    int				status_request;
    int				pagesize_2k;
@@ -77,7 +81,7 @@ static struct nand_ecclayout nand_hw_eccoob2k = {
    .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
 };
 #endif
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 #ifndef CONFIG_SYS_NAND_LARGEPAGE
 static struct nand_ecclayout nand_hw_eccoob = {
    .eccbytes = 9,
@@ -130,6 +134,16 @@ static int is_16bit_nand(void)
    else
    	return 0;
 }
+#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
+static int is_16bit_nand(void)
+{
+	struct src *src = (struct src *)SRC_BASE_ADDR;
+
+	if (readl(&src->sbmr) & SRC_SBMR_NF16B)
+		return 1;
+	else
+		return 0;
+}
 #else
 #warning "8/16 bit NAND autodetection not supported"
 static int is_16bit_nand(void)
@@ -150,7 +164,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size
/*
  * This function polls the NANDFC to wait for the basic operation to
- * complete by checking the INT bit of config2 register.
+ * complete by checking the INT bit.
  */
 static void wait_op_done(struct mxc_nand_host *host, int max_retries,
    			uint16_t param)
@@ -158,10 +172,17 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
    uint32_t tmp;
while (max_retries-- > 0) {
-		if (readw(&host->regs->config2) & NFC_INT) {
-			tmp = readw(&host->regs->config2);
-			tmp  &= ~NFC_INT;
-			writew(tmp, &host->regs->config2);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+		tmp = readnfc(&host->regs->config2);
+		if (tmp & NFC_V1_V2_CONFIG2_INT) {
+			tmp &= ~NFC_V1_V2_CONFIG2_INT;
+			writenfc(tmp, &host->regs->config2);
+#elif defined(MXC_NFC_V3_2)
+		tmp = readnfc(&host->ip_regs->ipc);
+		if (tmp & NFC_V3_IPC_INT) {
+			tmp &= ~NFC_V3_IPC_INT;
+			writenfc(tmp, &host->ip_regs->ipc);
+#endif
    		break;
    	}
    	udelay(1);
@@ -180,8 +201,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
 {
    MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
-	writew(cmd, &host->regs->flash_cmd);
-	writew(NFC_CMD, &host->regs->config2);
+	writenfc(cmd, &host->regs->flash_cmd);
+	writenfc(NFC_CMD, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, cmd);
@@ -196,8 +217,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
 {
    MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
-	writew(addr, &host->regs->flash_addr);
-	writew(NFC_ADDR, &host->regs->config2);
+	writenfc(addr, &host->regs->flash_addr);
+	writenfc(NFC_ADDR, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, addr);
@@ -213,7 +234,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
    if (spare_only)
    	MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
    	int i;
    	/*
    	 *  The controller copies the 64 bytes of spare data from
@@ -229,19 +250,26 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
    	}
    }
-	writew(buf_id, &host->regs->buf_addr);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+	writenfc(tmp, &host->regs->config1);
+#endif
/* Configure spare or page+spare access */
    if (!host->pagesize_2k) {
-		uint16_t config1 = readw(&host->regs->config1);
+		uint32_t config1 = readnfc(&host->regs->config1);
    	if (spare_only)
-			config1 |= NFC_SP_EN;
+			config1 |= NFC_CONFIG1_SP_EN;
    	else
-			config1 &= ~NFC_SP_EN;
-		writew(config1, &host->regs->config1);
+			config1 &= ~NFC_CONFIG1_SP_EN;
+		writenfc(config1, &host->regs->config1);
    }
-	writew(NFC_INPUT, &host->regs->config2);
+	writenfc(NFC_INPUT, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, spare_only);
@@ -256,24 +284,31 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 {
    MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
-	writew(buf_id, &host->regs->buf_addr);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+	writenfc(tmp, &host->regs->config1);
+#endif
/* Configure spare or page+spare access */
    if (!host->pagesize_2k) {
-		uint32_t config1 = readw(&host->regs->config1);
+		uint32_t config1 = readnfc(&host->regs->config1);
    	if (spare_only)
-			config1 |= NFC_SP_EN;
+			config1 |= NFC_CONFIG1_SP_EN;
    	else
-			config1 &= ~NFC_SP_EN;
-		writew(config1, &host->regs->config1);
+			config1 &= ~NFC_CONFIG1_SP_EN;
+		writenfc(config1, &host->regs->config1);
    }
-	writew(NFC_OUTPUT, &host->regs->config2);
+	writenfc(NFC_OUTPUT, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, spare_only);
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
    	int i;
/*
@@ -293,17 +328,23 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 /* Request the NANDFC to perform a read of the NAND device ID. */
 static void send_read_id(struct mxc_nand_host *host)
 {
-	uint16_t tmp;
+	uint32_t tmp;
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
    /* NANDFC buffer 0 is used for device ID output */
-	writew(0x0, &host->regs->buf_addr);
+	writenfc(0x0, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(tmp, &host->regs->config1);
+#endif
/* Read ID into main buffer */
-	tmp = readw(&host->regs->config1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_CONFIG1_SP_EN;
+	writenfc(tmp, &host->regs->config1);
-	writew(NFC_ID, &host->regs->config2);
+	writenfc(NFC_ID, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, 0);
@@ -315,32 +356,40 @@ static void send_read_id(struct mxc_nand_host *host)
  */
 static uint16_t get_dev_status(struct mxc_nand_host *host)
 {
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
    void __iomem *main_buf = host->regs->main_area[1];
    uint32_t store;
-	uint16_t ret, tmp;
+#endif
+	uint32_t ret, tmp;
    /* Issue status request to NAND device */
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
    /* store the main area1 first word, later do recovery */
    store = readl(main_buf);
    /* NANDFC buffer 1 is used for device status */
-	writew(1, &host->regs->buf_addr);
+	writenfc(1, &host->regs->buf_addr);
+#endif
/* Read status into main buffer */
-	tmp = readw(&host->regs->config1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_CONFIG1_SP_EN;
+	writenfc(tmp, &host->regs->config1);
-	writew(NFC_STATUS, &host->regs->config2);
+	writenfc(NFC_STATUS, &host->regs->operation);
/* Wait for operation to complete */
    wait_op_done(host, TROP_US_DELAY, 0);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
    /*
     *  Status is placed in first word of main buffer
     * get status, then recovery area 1 data
     */
    ret = readw(main_buf);
    writel(store, main_buf);
+#elif defined(MXC_NFC_V3_2)
+	ret = readnfc(&host->regs->config1) >> 16;
+#endif
return ret;
 }
@@ -359,13 +408,23 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
 {
    struct nand_chip *nand_chip = mtd->priv;
    struct mxc_nand_host *host = nand_chip->priv;
-	uint16_t tmp = readw(&host->regs->config1);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	uint16_t tmp = readnfc(&host->regs->config1);
+
+	if (on)
+		tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
+	else
+		tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+	writenfc(tmp, &host->regs->config1);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->ip_regs->config2);
if (on)
-		tmp |= NFC_ECC_EN;
+		tmp |= NFC_V3_CONFIG2_ECC_EN;
    else
-		tmp &= ~NFC_ECC_EN;
-	writew(tmp, &host->regs->config1);
+		tmp &= ~NFC_V3_CONFIG2_ECC_EN;
+	writenfc(tmp, &host->ip_regs->config2);
+#endif
 }
#ifdef CONFIG_MXC_NAND_HWECC
@@ -377,7 +436,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
     */
 }
-#ifdef MXC_NFC_V2_1
+#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
    			      struct nand_chip *chip,
    			      int page, int sndcmd)
@@ -698,7 +757,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
     * additional correction.  2-Bit errors cannot be corrected by
     * HW ECC, so we need to return failure
     */
-	uint16_t ecc_status = readw(&host->regs->ecc_status_result);
+	uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
    	MTDDEBUG(MTD_DEBUG_LEVEL0,
@@ -1167,7 +1226,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 int board_nand_init(struct nand_chip *this)
 {
    struct mtd_info *mtd;
-	uint16_t tmp;
+	uint32_t tmp;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
    this->options |= NAND_USE_FLASH_BBT;
@@ -1194,13 +1253,17 @@ int board_nand_init(struct nand_chip *this)
    this->verify_buf = mxc_nand_verify_buf;
host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+#ifdef MXC_NFC_V3_2
+	host->ip_regs =
+		(struct fsl_nfc_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+#endif
    host->clk_act = 1;
#ifdef CONFIG_MXC_NAND_HWECC
    this->ecc.calculate = mxc_nand_calculate_ecc;
    this->ecc.hwctl = mxc_nand_enable_hwecc;
    this->ecc.correct = mxc_nand_correct_data;
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
    	this->ecc.mode = NAND_ECC_HW_SYNDROME;
    	this->ecc.read_page = mxc_nand_read_page_syndrome;
    	this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
@@ -1238,25 +1301,26 @@ int board_nand_init(struct nand_chip *this)
    this->ecc.layout = &nand_hw_eccoob;
 #endif
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #ifdef MXC_NFC_V2_1
-	tmp = readw(&host->regs->config1);
-	tmp |= NFC_ONE_CYCLE;
-	tmp |= NFC_4_8N_ECC;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
+	tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+	writenfc(tmp, &host->regs->config1);
    if (host->pagesize_2k)
-		writew(64/2, &host->regs->spare_area_size);
+		writenfc(64/2, &host->regs->spare_area_size);
    else
-		writew(16/2, &host->regs->spare_area_size);
+		writenfc(16/2, &host->regs->spare_area_size);
 #endif
/*
     * preset operation
     * Unlock the internal RAM Buffer
     */
-	writew(0x2, &host->regs->config);
+	writenfc(0x2, &host->regs->config);
/* Blocks to be unlocked */
-	writew(0x0, &host->regs->unlockstart_blkaddr);
+	writenfc(0x0, &host->regs->unlockstart_blkaddr);
    /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
     * unlockend_blkaddr, but the magic 0x4000 does not always work
     * when writing more than some 32 megabytes (on 2k page nands)
@@ -1268,10 +1332,53 @@ int board_nand_init(struct nand_chip *this)
     * This might be NAND chip specific and the i.MX31 datasheet is
     * extremely vague about the semantics of this register.
     */
-	writew(0xFFFF, &host->regs->unlockend_blkaddr);
+	writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
/* Unlock Block Command for given address range */
-	writew(0x4, &host->regs->wrprot);
+	writenfc(0x4, &host->regs->wrprot);
+#elif defined(MXC_NFC_V3_2)
+	writenfc(NFC_V3_CONFIG1_RBA(0), &host->regs->config1);
+	writenfc(NFC_V3_IPC_CREQ, &host->ip_regs->ipc);
+
+	/* Unlock the internal RAM Buffer */
+	writenfc(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+			&host->ip_regs->wrprot);
+
+	/* Blocks to be unlocked */
+	for (tmp = 0; tmp < CONFIG_SYS_NAND_MAX_CHIPS; tmp++)
+		writenfc(0x0 | 0xFFFF << 16,
+				&host->ip_regs->wrprot_unlock_blkaddr[tmp]);
+
+	writenfc(0, &host->ip_regs->ipc);
+
+	tmp = readnfc(&host->ip_regs->config2);
+	tmp &= ~(NFC_V3_CONFIG2_SPAS_MASK | NFC_V3_CONFIG2_EDC_MASK |
+			NFC_V3_CONFIG2_ECC_MODE_8 | NFC_V3_CONFIG2_PS_MASK);
+	tmp |= NFC_V3_CONFIG2_ONE_CYCLE;
+
+	if (host->pagesize_2k) {
+		tmp |= NFC_V3_CONFIG2_SPAS(64/2);
+		tmp |= NFC_V3_CONFIG2_PS_2048;
+	} else {
+		tmp |= NFC_V3_CONFIG2_SPAS(16/2);
+		tmp |= NFC_V3_CONFIG2_PS_512;
+	}
+
+	writenfc(tmp, &host->ip_regs->config2);
+
+	tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+
+	if (!(this->options & NAND_BUSWIDTH_16))
+		tmp |= NFC_V3_CONFIG3_FW8;
+
+	writenfc(tmp, &host->ip_regs->config3);
+
+	writenfc(0, &host->ip_regs->delay_line);
+#endif
return 0;
 }
diff --git u-boot-4d3c95f.orig/include/fsl_nfc.h u-boot-4d3c95f/include/fsl_nfc.h
index ff537b4..48a6448 100644
--- u-boot-4d3c95f.orig/include/fsl_nfc.h
+++ u-boot-4d3c95f/include/fsl_nfc.h
@@ -33,7 +33,8 @@
  *	to support up to 2K byte pagesize nand.
  *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
  *
- * MX25 and MX35 have version 2.1, which has:
+ * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
+ * have:
  *	8 512-byte main buffers and
  *	8 64-byte spare buffers
  *	to support up to 4K byte pagesize nand.
@@ -44,20 +45,29 @@
 #define MXC_NFC_V1
 #define is_mxc_nfc_1()		1
 #define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
 #define MXC_NFC_V2_1
 #define is_mxc_nfc_1()		0
 #define is_mxc_nfc_21()		1
+#define is_mxc_nfc_32()		0
+#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#define MXC_NFC_V3
+#define MXC_NFC_V3_2
+#define is_mxc_nfc_1()		0
+#define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		1
 #else
 #error "MXC NFC implementation not supported"
 #endif
+#define is_mxc_nfc_3()		is_mxc_nfc_32()
#if defined(MXC_NFC_V1)
 #define NAND_MXC_NR_BUFS		4
 #define NAND_MXC_SPARE_BUF_SIZE		16
 #define NAND_MXC_REG_OFFSET		0xe00
 #define NAND_MXC_2K_MULTI_CYCLE
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 #define NAND_MXC_NR_BUFS		8
 #define NAND_MXC_SPARE_BUF_SIZE		64
 #define NAND_MXC_REG_OFFSET		0x1e00
@@ -110,61 +120,106 @@ struct fsl_nfc_regs {
    u16 unlockend_blkaddr2;
    u16 unlockstart_blkaddr3;
    u16 unlockend_blkaddr3;
+#elif defined(MXC_NFC_V3_2)
+	u32 flash_cmd;
+	u32 flash_addr[12];
+	u32 config1;
+	u32 ecc_status_result;
+	u32 status_sum;
+	u32 launch;
 #endif
 };
-/*
- * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
- * operation
- */
-#define NFC_CMD		0x1
+#ifdef MXC_NFC_V3_2
+struct fsl_nfc_ip_regs {
+	u32 wrprot;
+	u32 wrprot_unlock_blkaddr[8];
+	u32 config2;
+	u32 config3;
+	u32 ipc;
+	u32 err_addr;
+	u32 delay_line;
+};
+#endif
-/*
- * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
- * operation
- */
-#define NFC_ADDR	0x2
+/* Set FCMD to 1, rest to 0 for Command operation */
+#define NFC_CMD				0x1
-/*
- * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
- * operation
- */
-#define NFC_INPUT	0x4
+/* Set FADD to 1, rest to 0 for Address operation */
+#define NFC_ADDR			0x2
-/*
- * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
- * Output operation
- */
-#define NFC_OUTPUT	0x8
+/* Set FDI to 1, rest to 0 for Input operation */
+#define NFC_INPUT			0x4
-/*
- * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
- * operation
- */
-#define NFC_ID		0x10
+/* Set FDO to 001, rest to 0 for Data Output operation */
+#define NFC_OUTPUT			0x8
-/*
- * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation
- */
-#define NFC_STATUS	0x20
+/* Set FDO to 010, rest to 0 for Read ID operation */
+#define NFC_ID				0x10
-/*
- * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
- * operation
- */
-#define NFC_INT		0x8000
+/* Set FDO to 100, rest to 0 for Read Status operation */
+#define NFC_STATUS			0x20
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define NFC_CONFIG1_SP_EN		(1 << 2)
+#define NFC_CONFIG1_RST			(1 << 6)
+#define NFC_CONFIG1_CE			(1 << 7)
+#elif defined(MXC_NFC_V3_2)
+#define NFC_CONFIG1_SP_EN		(1 << 0)
+#define NFC_CONFIG1_CE			(1 << 1)
+#define NFC_CONFIG1_RST			(1 << 2)
+#endif
+#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
+#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
+#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
+#define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
+#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)
+
+#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+#define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
+#define NFC_V3_CONFIG2_PS_512		(0 << 0)
+#define NFC_V3_CONFIG2_PS_2048		(1 << 0)
+#define NFC_V3_CONFIG2_PS_4096		(2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
+#define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
+#define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
+#define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
+#define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
+#define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
+#define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
+#define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)
+
+#define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8		(1 << 3)
+#define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)
+
+#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
+
+#define NFC_V3_IPC_CREQ			(1 << 0)
+#define NFC_V3_IPC_INT			(1 << 31)
-#ifdef MXC_NFC_V2_1
-#define NFC_4_8N_ECC	(1 << 0)
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define operation	config2
+#define readnfc		readw
+#define writenfc	writew
+#elif defined(MXC_NFC_V3_2)
+#define operation	launch
+#define readnfc		readl
+#define writenfc	writel
 #endif
-#define NFC_SP_EN	(1 << 2)
-#define NFC_ECC_EN	(1 << 3)
-#define NFC_INT_MSK	(1 << 4)
-#define NFC_BIG		(1 << 5)
-#define NFC_RST		(1 << 6)
-#define NFC_CE		(1 << 7)
-#define NFC_ONE_CYCLE	(1 << 8)
-#define NFC_FP_INT	(1 << 11)
#endif /* __FSL_NFC_H */
diff --git u-boot-4d3c95f.orig/nand_spl/nand_boot_fsl_nfc.c u-boot-4d3c95f/nand_spl/nand_boot_fsl_nfc.c
index a40c998..1096727 100644
--- u-boot-4d3c95f.orig/nand_spl/nand_boot_fsl_nfc.c
+++ u-boot-4d3c95f/nand_spl/nand_boot_fsl_nfc.c
@@ -30,64 +30,117 @@
 #include <asm/io.h>
 #include <fsl_nfc.h>
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+#elif defined(MXC_NFC_V3_2)
+static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+#endif
static void nfc_wait_ready(void)
 {
    uint32_t tmp;
-	while (!(readw(&nfc->config2) & NFC_INT))
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
    	;
/* Reset interrupt flag */
-	tmp = readw(&nfc->config2);
-	tmp &= ~NFC_INT;
-	writew(tmp, &nfc->config2);
+	tmp = readnfc(&nfc->config2);
+	tmp &= ~NFC_V1_V2_CONFIG2_INT;
+	writenfc(tmp, &nfc->config2);
+#elif defined(MXC_NFC_V3_2)
+	while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT))
+		;
+
+	/* Reset interrupt flag */
+	tmp = readnfc(&nfc_ip->ipc);
+	tmp &= ~NFC_V3_IPC_INT;
+	writenfc(tmp, &nfc_ip->ipc);
+#endif
 }
static void nfc_nand_init(void)
 {
-#if defined(MXC_NFC_V2_1)
+#if defined(MXC_NFC_V3_2)
+	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+	int tmp;
+
+	tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
+			NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
+		NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+		NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
+		NFC_V3_CONFIG2_ONE_CYCLE;
+	if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
+		tmp |= NFC_V3_CONFIG2_PS_4096;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048)
+		tmp |= NFC_V3_CONFIG2_PS_2048;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 512)
+		tmp |= NFC_V3_CONFIG2_PS_512;
+	/*
+	 * if spare size is larger that 16 bytes per 512 byte hunk
+	 * then use 8 symbol correction instead of 4
+	 */
+	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+		tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
+	else
+		tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
+	writenfc(tmp, &nfc_ip->config2);
+
+	tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+#ifndef CONFIG_SYS_NAND_BUSWIDTH_16
+	tmp |= NFC_V3_CONFIG3_FW8;
+#endif
+	writenfc(tmp, &nfc_ip->config3);
+
+	writenfc(0, &nfc_ip->delay_line);
+#elif defined(MXC_NFC_V2_1)
    int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
    int config1;
-	writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+	writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
/* unlocking RAM Buff */
-	writew(0x2, &nfc->config);
+	writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */
-	config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK |
-			NFC_ONE_CYCLE | NFC_FP_INT;
+	config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN |
+			NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE |
+			NFC_V2_CONFIG1_FP_INT;
    /*
     * if spare size is larger that 16 bytes per 512 byte hunk
     * then use 8 symbol correction instead of 4
     */
    if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
-		config1 &= ~NFC_4_8N_ECC;
+		config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
    else
-		config1 |= NFC_4_8N_ECC;
-	writew(config1, &nfc->config1);
+		config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+	writenfc(config1, &nfc->config1);
 #elif defined(MXC_NFC_V1)
    /* unlocking RAM Buff */
-	writew(0x2, &nfc->config);
+	writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */
-	writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1);
+	writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK,
+			&nfc->config1);
 #endif
 }
static void nfc_nand_command(unsigned short command)
 {
-	writew(command, &nfc->flash_cmd);
-	writew(NFC_CMD, &nfc->config2);
+	writenfc(command, &nfc->flash_cmd);
+	writenfc(NFC_CMD, &nfc->operation);
    nfc_wait_ready();
 }
static void nfc_nand_address(unsigned short address)
 {
-	writew(address, &nfc->flash_addr);
-	writew(NFC_ADDR, &nfc->config2);
+	writenfc(address, &nfc->flash_addr);
+	writenfc(NFC_ADDR, &nfc->operation);
    nfc_wait_ready();
 }
@@ -121,8 +174,14 @@ static void nfc_nand_data_output(void)
    int i;
 #endif
-	writew(0, &nfc->buf_addr);
-	writew(NFC_OUTPUT, &nfc->config2);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
+	writenfc(NFC_OUTPUT, &nfc->operation);
    nfc_wait_ready();
 #ifdef NAND_MXC_2K_MULTI_CYCLE
    /*
@@ -130,8 +189,8 @@ static void nfc_nand_data_output(void)
     * for pages larger than 512 bytes.
     */
    for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) {
-		writew(i, &nfc->buf_addr);
-		writew(NFC_OUTPUT, &nfc->config2);
+		writenfc(i, &nfc->buf_addr);
+		writenfc(NFC_OUTPUT, &nfc->operation);
    	nfc_wait_ready();
    }
 #endif
@@ -142,7 +201,7 @@ static int nfc_nand_check_ecc(void)
 #if defined(MXC_NFC_V1)
    u16 ecc_status = readw(&nfc->ecc_status_result);
    return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2;
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
    u32 ecc_status = readl(&nfc->ecc_status_result);
    int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
    int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
@@ -160,7 +219,14 @@ static int nfc_nand_check_ecc(void)
static void nfc_nand_read_page(unsigned int page_address)
 {
-	writew(0, &nfc->buf_addr); /* read in first 0 buffer */
+	/* read in first 0 buffer */
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
    nfc_nand_command(NAND_CMD_READ0);
    nfc_nand_page_address(page_address);

    