On Mon, Apr 03, 2017 at 07:23:14PM +0530, Jagan Teki wrote:
From: Jagan Teki jagan@amarulasolutions.com
Add initial dts support for i.MX6 Quad Plus Sabresd board.
Boot from MMC:
U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29) Trying to boot from MMC1
U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 29C Reset cause: POR Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board Board: MX6-SabreSD I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment
gpio@020a4000: dir_output: error: gpio GPIO3_19 not reserved gpio@020a4000: set_value: error: gpio GPIO3_19 not reserved gpio@020b4000: dir_output: error: gpio GPIO7_12 not reserved gpio@020b4000: set_value: error: gpio GPIO7_12 not reserved PCI: pcie phy link never came up No panel detected: default to Hannstar-XGA gpio@0209c000: dir_output: error: gpio GPIO1_21 not reserved Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: gpio@0209c000: dir_output: error: gpio GPIO1_25 not reserved gpio@0209c000: set_value: error: gpio GPIO1_25 not reserved FEC [PRIME] Hit any key to stop autoboot: 0 =>
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
board/freescale/mx6sabresd/MAINTAINERS | 1 + configs/imx6qp_sabresd_defconfig | 60 ++++++++++++++++++++++++++++++++++
Could this be renamed to imx6qp_sabresd_spl_defconfig?
Thanks, Peng.