Hi Tim,
On 27/05/2015 15:21, Tim Harvey wrote:
On Fri, May 8, 2015 at 3:17 PM, Tim Harvey tharvey@gateworks.com wrote:
If CONFIG_PCI_SCAN_SHOW enabled then lets print a message of no link was detected.
Signed-off-by: Tim Harvey tharvey@gateworks.com
drivers/pci/pcie_imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index fd7e4d4..ca485ba 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -588,7 +588,9 @@ static int imx_pcie_link_up(void) udelay(10); count++; if (count >= 2000) {
debug("phy link never came up\n");+#ifdef CONFIG_PCI_SCAN_SHOW
puts("PCI: pcie phy link never came up\n");+#endif debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0), readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1)); -- 1.9.1
Stefano,
I probably should have sent this one to you directly being an imx driver.
I have seen the patch and the related discussion who should take care of it ;-)
Do not worry - I set myself as delegate for this and I will merge it soon.
Best regards, Stefano Babic