Larry,
On Thursday 25 October 2007, Larry Johnson wrote:
Summary:
board/amcc/sequoia/sdram.h | 4 +- board/lwmon5/sdram.h | 4 +- cpu/ppc4xx/Makefile | 31 +- cpu/ppc4xx/denali_data_eye.c | 396 +++++++++++++ cpu/ppc4xx/denali_spd_ddr2.c | 1276 ++++++++++++++++++++++++++++++++++++++++++ include/ppc440.h | 514 +++++++++++++++-- 6 files changed, 2167 insertions(+), 58 deletions(-)
This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM controller. It should also work on the 440GRx. It is based on the DDR2 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support. It also takes EPx/GRx SDRAM definitions and support code that are specific to the Sequoia/Rainier and lwmon5 boards, and copies them to general 4xx directories. (Neither Stefan nor I are happy with the names of the two new files, so suggestions are welcome!)
I'm (finally) trying to integrate your patches into the u-boot-ppc4xx custodian repository for upstream merge. Unfortunately my repo changed quite a bit lately and your patches don't apply anymore. So could you please rebase this patchset against the "for-1.3.2" branch of the 4xx repo:
http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot/u-boot-ppc4xx.git;a=shortlog;...
I promise to commit soon so that you don't have to rework again.
Unfortunately this is valid also for these patchsets too:
[U-Boot-Users] [PATCH 1/2 (resubmit)] PPC4xx: Cosmetic changes
[U-Boot-Users] [PATCH 1/4 resubmit] Add driver for National Semiconductor LM73 temperature sensor (with your Korat board support)
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================