Minda, can you test USB Host function on VisionFive2? I guess that it is connected to the USB-C port. For the boards with JH7110 and not any VL805 USB controller this Cadence USB is the only way to have host USB. It is very much wanted to have host USB. Thanks! -E
In VF2, PCIe0 connect with VL805 USB 3.0 host controller. Now PCIe driver have commit to Uboot upstream code. USB 3.0 can be used in uboot upstream code. Milk-v mars also connect VL805 and can use USB 3.0 host too.
You can use "pci e" command to active USB 3.0 host controller and then "usb reset" to scan usb devices. If you have any issue about this. Also reply it in this. Thanks.
On Sun, May 19, 2024 at 11:20 PM Minda Chen minda.chen@starfivetech.com wrote:
Hi, there is a compile warning. I don't know why.
On Sat, May 4, 2024 at 8:04 AM Minda Chen minda.chen@starfivetech.com wrote:
Add Starfive JH7110 Cadence USB driver and related PHY driver. So the codes can be used in visionfive2 and milkv 7110 board.
The driver is almost the same with kernel driver.
patch1: Add set phy mode function in cdns3 core driver which is used by Starfive.
patch2-3: USB and PCIe 2.0 (usb 3.0) PHY drivier patch4: Cadence USB wrapper driver. patch5-7 dts, config and maintainers update.
Minda Chen (7): usb: cdns3: Set USB PHY mode in cdns3_probe() phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver usb: cdns: starfive: Add cdns USB driver configs: starfive: Add visionfive2 cadence USB configuration dts: starfive: Add JH7110 Cadence USB dts node MAINTAINERS: Update Starfive visionfive2 maintain files.
.../dts/jh7110-starfive-visionfive-2.dtsi | 5 + arch/riscv/dts/jh7110.dtsi | 52 +++++ board/starfive/visionfive2/MAINTAINERS | 2 + configs/starfive_visionfive2_defconfig | 9 + drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 1 + drivers/phy/starfive/Kconfig | 19 ++ drivers/phy/starfive/Makefile | 7 + drivers/phy/starfive/phy-jh7110-pcie.c | 211
++++++++++++++++++
drivers/phy/starfive/phy-jh7110-usb2.c | 135 +++++++++++ drivers/usb/cdns3/Kconfig | 7 + drivers/usb/cdns3/Makefile | 2 + drivers/usb/cdns3/cdns3-starfive.c | 184
+++++++++++++++
drivers/usb/cdns3/core.c | 17 ++ 14 files changed, 652 insertions(+) create mode 100644 drivers/phy/starfive/Kconfig create mode 100644 drivers/phy/starfive/Makefile create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
base-commit: 174ac987655c888017c82df1883c0c2ea0dc2495
2.17.1
The compile warning as follows:
In file included from /home/user/source/u-boot.git/drivers/usb/cdns3/gadget.c:70: /home/user/source/u-boot.git/include/linux/bitmap.h: In function ‘bitmap_find_next_zero_area’: /home/user/source/u-boot.git/include/linux/bitmap.h:170:17: warning: implicit declaration of function ‘find_next_zero_bit’; did you mean ‘find_next_bit’? [-Wimplicit-function-declaration] 170 | index = find_next_zero_bit(map, size, start); | ^~~~~~~~~~~~~~~~~~ | find_next_bit CC drivers/usb/cdns3/ep0.o In file included from /home/user/source/u-boot.git/include/linux/usb/composite.h:26, from /home/user/source/u-boot.git/drivers/usb/cdns3/ep0.c:19: /home/user/source/u-boot.git/include/linux/bitmap.h: In function ‘bitmap_find_next_zero_area’: /home/user/source/u-boot.git/include/linux/bitmap.h:170:17: warning: implicit declaration of function ‘find_next_zero_bit’; did you mean ‘find_next_bit’? [-Wimplicit-function-declaration] 170 | index = find_next_zero_bit(map, size, start); | ^~~~~~~~~~~~~~~~~~ | find_next_bit
Is this something missing in the patch series?
-E
I have not noticed this. I just check this it is risc-v code do not contain
"find_next_zero_bit" macro define.