On 11/6/23 03:25, Sean Anderson wrote:
Several boards enable SPL_FS_FAT and SPL_LIBDISK_SUPPORT when they can't be used (as there is no block device support enabled). Disable these configs. The list of boards was generated with the following command:
$ tools/qconfig.py -f SPL SPL_FS_FAT ~SPL_MMC ~SPL_BLK_FS ~SPL_SATA \ ~SPL_USB_STORAGE ~ENV_IS_IN_FAT ~EFILIBDISK was left enabled for the am* boards, since it seems to result in actual size reduction, indicating that partitions are being used for something.
Signed-off-by: Sean Anderson seanga2@gmail.com
(no changes since v1)
configs/am335x_evm_spiboot_defconfig | 2 +- configs/am65x_evm_r5_usbdfu_defconfig | 1 - configs/xilinx_zynqmp_mini_qspi_defconfig | 3 +++ configs/zynq_cse_nand_defconfig | 3 +++ configs/zynq_cse_nor_defconfig | 3 +++ configs/zynq_cse_qspi_defconfig | 3 +++ 6 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index b5b11fb62c8..fff5265e56a 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -13,6 +13,7 @@ CONFIG_CLOCK_SYNTHESIZER=y # CONFIG_OF_LIBFDT_OVERLAY is not set # CONFIG_SPL_MMC is not set CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_TIMESTAMP=y @@ -27,7 +28,6 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig index f610b2dd94e..6b0bb120d10 100644 --- a/configs/am65x_evm_r5_usbdfu_defconfig +++ b/configs/am65x_evm_r5_usbdfu_defconfig @@ -21,7 +21,6 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_SIZE_LIMIT=0x7ec00 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000 -CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index a1adfb9e5d1..8b92e1c7358 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi" CONFIG_SPL_STACK=0xfffffffc CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set +# CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_NO_DDR=y # CONFIG_PSCI_RESET is not set @@ -89,6 +91,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y +CONFIG_FS_FAT=y
This can be also removed and also for zynq_cse boards below. There is no need to have FAT support.
Thanks, Michal