Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI.
General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC
On module WiFi6/BT5 is available in the following Neu6 variants.
Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI.
IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux.
Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform.
Boot log for the record,
DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out
U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9
U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530)
Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 =>
Add support for Edgeble Neu6 Model A IO Board.
Signed-off-by: Jagan Teki jagan@edgeble.ai --- .../dts/rk3588-edgeble-neu6a-io-u-boot.dtsi | 24 +++++++ arch/arm/mach-rockchip/rk3588/Kconfig | 15 +++++ board/edgeble/neural-compute-module-6/Kconfig | 15 +++++ .../neural-compute-module-6/MAINTAINERS | 6 ++ .../edgeble/neural-compute-module-6/Makefile | 7 ++ board/edgeble/neural-compute-module-6/neu6.c | 4 ++ configs/neu6a-io-rk3588_defconfig | 67 +++++++++++++++++++ doc/board/rockchip/rockchip.rst | 2 + include/configs/neural-compute-module-6.h | 15 +++++ 9 files changed, 155 insertions(+) create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi create mode 100644 board/edgeble/neural-compute-module-6/Kconfig create mode 100644 board/edgeble/neural-compute-module-6/MAINTAINERS create mode 100644 board/edgeble/neural-compute-module-6/Makefile create mode 100644 board/edgeble/neural-compute-module-6/neu6.c create mode 100644 configs/neu6a-io-rk3588_defconfig create mode 100644 include/configs/neural-compute-module-6.h
diff --git a/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi b/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi new file mode 100644 index 0000000000..19a658a662 --- /dev/null +++ b/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = &uart2; + u-boot,spl-boot-order = &sdmmc; + }; +}; + +&sdmmc { + bus-width = <4>; + u-boot,dm-spl; + u-boot,spl-fifo-mode; + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index e8c14e4187..def4094e2e 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -1,5 +1,18 @@ if ROCKCHIP_RK3588
+config TARGET_RK3588_NEU6 + bool "Edgeble Neural Compute Module 6(Neu6) SoM" + select BOARD_LATE_INIT + help + Neu6: + Neural Compute Module 6A(Neu6a) is a 96boards SoM-CB compute module + based on Rockchip RK3588 from Edgeble AI. + + Neu6-IO: + Neural Compute Module 6(Neu6) IO board is an industrial form factor + IO board and Neu6a needs to mount on top of this IO board in order to + create complete Edgeble Neural Compute Module 6(Neu6) IO platform. + config ROCKCHIP_BOOT_MODE_REG default 0xfd588080
@@ -12,4 +25,6 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x80000
+source board/edgeble/neural-compute-module-6/Kconfig + endif diff --git a/board/edgeble/neural-compute-module-6/Kconfig b/board/edgeble/neural-compute-module-6/Kconfig new file mode 100644 index 0000000000..c445454dde --- /dev/null +++ b/board/edgeble/neural-compute-module-6/Kconfig @@ -0,0 +1,15 @@ +if TARGET_RK3588_NEU6 + +config SYS_BOARD + default "neural-compute-module-6" + +config SYS_VENDOR + default "edgeble" + +config SYS_CONFIG_NAME + default "neural-compute-module-6" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/edgeble/neural-compute-module-6/MAINTAINERS b/board/edgeble/neural-compute-module-6/MAINTAINERS new file mode 100644 index 0000000000..249df957f1 --- /dev/null +++ b/board/edgeble/neural-compute-module-6/MAINTAINERS @@ -0,0 +1,6 @@ +RK3588-NEU6 +M: Jagan Teki jagan@edgeble.ai +S: Maintained +F: board/edgeble/neural-compute-module-6 +F: include/configs/neural-compute-module-6.h +F: configs/neu6a-io-rk3588_defconfig diff --git a/board/edgeble/neural-compute-module-6/Makefile b/board/edgeble/neural-compute-module-6/Makefile new file mode 100644 index 0000000000..28310b1b34 --- /dev/null +++ b/board/edgeble/neural-compute-module-6/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += neu6.o diff --git a/board/edgeble/neural-compute-module-6/neu6.c b/board/edgeble/neural-compute-module-6/neu6.c new file mode 100644 index 0000000000..3d2262ce97 --- /dev/null +++ b/board/edgeble/neural-compute-module-6/neu6.c @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ diff --git a/configs/neu6a-io-rk3588_defconfig b/configs/neu6a-io-rk3588_defconfig new file mode 100644 index 0000000000..fb5a2b7dbc --- /dev/null +++ b/configs/neu6a-io-rk3588_defconfig @@ -0,0 +1,67 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588-edgeble-neu6a-io" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_RK3588_NEU6=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-edgeble-neu6a-io.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_ATF=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_REGULATOR_PWM=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_DM_RESET=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +# CONFIG_BINMAN_FDT is not set +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 28c837a382..a140c1a8a4 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -86,6 +86,8 @@ List of mainline supported Rockchip boards: - Radxa ROCK Pi 4 (rock-pi-4-rk3399) - Rockchip Evb-RK3399 (evb_rk3399) - Theobroma Systems RK3399-Q7 SoM - Puma (puma_rk3399) +* rk3588 + - Edgeble Neural Compute Module 6 SoM - Neu6a (neu6a-io-r1126) * rv1108 - Rockchip Evb-rv1108 (evb-rv1108) - Elgin-R1 (elgin-rv1108) diff --git a/include/configs/neural-compute-module-6.h b/include/configs/neural-compute-module-6.h new file mode 100644 index 0000000000..52501b7ab8 --- /dev/null +++ b/include/configs/neural-compute-module-6.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +#ifndef __NEURAL_COMPUTE_MODULE_6_H +#define __NEURAL_COMPUTE_MODULE_6_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __NEURAL_COMPUTE_MODULE_6_H */