Dear Roy Zang,
In message 1307508687-12522-1-git-send-email-tie-fei.zang@freescale.com you wrote:
The P1023RDS board is the reference board for the P1023 SoC.
Add support for booting it from NOR or NAND, with fixed 2G of DDR, PCIe, UART, I2C, etc.
Please fix the checkpatch warnings (7 lines over 80 characters)
...
+/* ECC will be enabled based on perf_mode environment variable */ +#undef CONFIG_DDR_ECC
...
+#undef CONFIG_CLOCKS_IN_MHZ
...
+#undef CONFIG_SYS_RAMBOOT
...
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
...
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
...
+#undef CONFIG_WATCHDOG /* watchdog disabled */
...
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
etc. Please do not undef what is not defined in the first place.
Best regards,
Wolfgang Denk