move usb device tree fixup code from "arch/powerpc/" to "drivers/usb/" so that it works independent of architecture it is running on
Signed-off-by: Ramneek Mehresh ramneek.mehresh@freescale.com Signed-off-by: Nikhil Badola nikhil.badola@freescale.com --- arch/powerpc/cpu/mpc8xxx/fdt.c | 104 --------------------------------------- drivers/usb/host/ehci-fsl.c | 109 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 109 insertions(+), 104 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 4cec5e1..65fde3f 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -73,110 +73,6 @@ void ft_fixup_num_cores(void *blob) { } #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, - const char *phy_type, int start_offset) -{ - const char *compat_dr = "fsl-usb2-dr"; - const char *compat_mph = "fsl-usb2-mph"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - const char *node_type = NULL; - int node_offset; - int err; - - node_offset = fdt_node_offset_by_compatible(blob, - start_offset, compat_mph); - if (node_offset < 0) { - node_offset = fdt_node_offset_by_compatible(blob, - start_offset, compat_dr); - if (node_offset < 0) { - printf("WARNING: could not find compatible" - " node %s or %s: %s.\n", compat_mph, - compat_dr, fdt_strerror(node_offset)); - return -1; - } else - node_type = compat_dr; - } else - node_type = compat_mph; - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, node_type, fdt_strerror(err)); - } - - if (phy_type) { - err = fdt_setprop(blob, node_offset, prop_type, phy_type, - strlen(phy_type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, node_type, fdt_strerror(err)); - } - - return node_offset; -} - -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - const char *modes[] = { "host", "peripheral", "otg" }; - const char *phys[] = { "ulpi", "utmi" }; - int usb_mode_off = -1; - int usb_phy_off = -1; - char str[5]; - int i, j; - - for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { - const char *dr_mode_type = NULL; - const char *dr_phy_type = NULL; - int mode_idx = -1, phy_idx = -1; - snprintf(str, 5, "%s%d", "usb", i); - if (hwconfig(str)) { - for (j = 0; j < ARRAY_SIZE(modes); j++) { - if (hwconfig_subarg_cmp(str, "dr_mode", - modes[j])) { - mode_idx = j; - break; - } - } - - for (j = 0; j < ARRAY_SIZE(phys); j++) { - if (hwconfig_subarg_cmp(str, "phy_type", - phys[j])) { - phy_idx = j; - break; - } - } - - if (mode_idx < 0 && phy_idx < 0) { - printf("WARNING: invalid phy or mode\n"); - return; - } - - if (mode_idx > -1) - dr_mode_type = modes[mode_idx]; - - if (phy_idx > -1) - dr_phy_type = phys[phy_idx]; - } - - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - dr_mode_type, NULL, usb_mode_off); - - if (usb_mode_off < 0) - return; - - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, dr_phy_type, usb_phy_off); - - if (usb_phy_off < 0) - return; - } -} -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ - /* * update crypto node properties to a specified revision of the SEC * called with sec_rev == 0 if not on an E processor diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d5361d7..295250a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -15,6 +15,7 @@ #include <usb/ehci-fsl.h> #include <hwconfig.h> #include <fsl_usb.h> +#include <fdt_support.h>
#include "ehci.h"
@@ -159,3 +160,111 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) cmd |= TXFIFO_THRESH(txfifo_thresh); ehci_writel(&ehci->txfilltuning, cmd); } + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) +static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, + const char *phy_type, int start_offset) +{ + const char *compat_dr = "fsl-usb2-dr"; + const char *compat_mph = "fsl-usb2-mph"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + const char *node_type = NULL; + int node_offset; + int err; + + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, compat_mph); + if (node_offset < 0) { + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, + compat_dr); + if (node_offset < 0) { + printf("WARNING: could not find compatible node: %s", + fdt_strerror(node_offset)); + return -1; + } + node_type = compat_dr; + } else { + node_type = compat_mph; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, node_type, fdt_strerror(err)); + } + + if (phy_type) { + err = fdt_setprop(blob, node_offset, prop_type, phy_type, + strlen(phy_type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, node_type, fdt_strerror(err)); + } + + return node_offset; +} + +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + static const char * const modes[] = { "host", "peripheral", "otg" }; + static const char * const phys[] = { "ulpi", "utmi" }; + int usb_mode_off = -1; + int usb_phy_off = -1; + char str[5]; + int i, j; + + for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; + int mode_idx = -1, phy_idx = -1; + + snprintf(str, 5, "%s%d", "usb", i); + if (hwconfig(str)) { + for (j = 0; j < ARRAY_SIZE(modes); j++) { + if (hwconfig_subarg_cmp(str, "dr_mode", + modes[j])) { + mode_idx = j; + break; + } + } + + for (j = 0; j < ARRAY_SIZE(phys); j++) { + if (hwconfig_subarg_cmp(str, "phy_type", + phys[j])) { + phy_idx = j; + break; + } + } + + if (mode_idx < 0 && phy_idx < 0) { + printf("WARNING: invalid phy or mode\n"); + return; + } + + if (mode_idx > -1) + dr_mode_type = modes[mode_idx]; + + if (phy_idx > -1) + dr_phy_type = phys[phy_idx]; + } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, + usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, + usb_phy_off); + + if (usb_phy_off < 0) + return; + } +} +#endif