
Hi Hannes,
I used git send-email and git format-patch manually, which was a bit of a hassle.
Now I used patman which seems to be really handy, thanks for the hint.
Martin
On 04/27/2016 12:07 PM, Hannes Schmelzer wrote:
Martin,
you have to send also a v2 from "2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette". v1 doesn't apply after your v2 patch below has been applied.
how do you manage your patch-generation and emailing?
have a look to: tools/patman/README, a really great tool for managing patch-series.
best regards, Hannes
On 04/27/2016 11:42 AM, Martin Pietryka wrote:
To support 16bpp we just need to change the raster_ctrl register accordingly. Also 32bpp mode should work as well, but was not tested. According to the TRM the uppermost byte will be ignored when LCD_TFT_24BPP_UNPACK is set.
The switch logic is based on the Liunx kernel tilcdc driver: drivers/gpu/drm/tilcdc/tilcdc_crtc.c: lines 407 through 419 (kernel was checked out at commit: bcc981e9ed8)
Signed-off-by: Martin Pietryka martin.pietryka@chello.at
drivers/video/am335x-fb.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c index 0ec843f..569ecb6 100644 --- a/drivers/video/am335x-fb.c +++ b/drivers/video/am335x-fb.c @@ -5,7 +5,7 @@
- minimal framebuffer driver for TI's AM335x SoC to be compatible
with
- Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
- supporting only 24bit RGB/TFT raster Mode (not using palette)
- supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
- sets up LCD controller as in 'am335x_lcdpanel' struct given
- starts output DMA from gd->fb_base buffer
@@ -106,6 +106,8 @@ int lcd_get_size(int *line_length) int am335xfb_init(struct am335x_lcdpanel *panel) {
- u32 raster_ctrl = 0;
if (0 == gd->fb_base) { printf("ERROR: no valid fb_base stored in
GLOBAL_DATA_PTR!\n"); return -1; @@ -115,6 +117,21 @@ int am335xfb_init(struct am335x_lcdpanel *panel) return -1; }
- /* We can already set the bits for the raster_ctrl in this
check */
- switch (panel->bpp) {
- case 16:
break;
- case 32:
raster_ctrl |= LCD_TFT_24BPP_UNPACK;
/* fallthrough */
- case 24:
raster_ctrl |= LCD_TFT_24BPP_MODE;
break;
- default:
error("am335x-fb: invalid bpp value: %d\n", panel->bpp);
return -1;
- }
debug("setting up LCD-Controller for %dx%dx%d
(hfp=%d,hbp=%d,hsw=%d / ", panel->hactive, panel->vactive, panel->bpp, panel->hfp, panel->hbp, panel->hsw); @@ -157,8 +174,7 @@ int am335xfb_init(struct am335x_lcdpanel *panel) LCD_HBPMSB(panel->hbp) | LCD_HFPMSB(panel->hfp) | 0x0000FF00; /* clk cycles for ac-bias */
- lcdhw->raster_ctrl = LCD_TFT_24BPP_MODE |
LCD_TFT_24BPP_UNPACK |
- lcdhw->raster_ctrl = raster_ctrl | /* contains the bits
for the pixel format */ LCD_PALMODE_RAWDATA | LCD_TFT_MODE | LCD_RASTER_ENABLE;